Tag Archives: laminated glass

Soundproof Glass By Bear Glass

 

A soundproof glass is a glass that prevents sound from penetrating from one side to the other. In most cases, those desiring soundproof glass are those who live near noisy environments, such as airports of busy roads. While glass, in various configurations, may do a good job of preventing sound from getting through, it should be noted that soundproof glass, at least from a general consumer standpoint, is all but impossible to acquire.

Sounds like this is exactly what you need!

There are a number of different ways to make glass soundproof. The first involves simply making the glass thicker. The thicker the glass is, the stiffer it becomes and, as a natural consequence, less prone to vibration. In such cases, the sound is naturally reduced. Another option is to insulate the glass with some other material, or perhaps just put an empty area in between two panes of glass.

To make soundproof glass completely capable of blocking all sound would be prohibitively expensive and likely not recommended for windows. The glass would need to be extremely thick and would be very heavy, perhaps overwhelming any material used in a typical window frame.

Do you hear what we are saying to you?

The most common place to find soundproof glass is a sound studio, where it is important for music and other types of recordings to have a quiet environment. However, even then the glass is not completely able to withstand all sounds.

For more information, please contact us. We look forward to working with you!

FACTORY/OFFICE

Address:
Bear Glass Inc.
399 20th Street
Brooklyn, NY 11215
Phone: 718-832-3604
Fax: 718-832-0786
 

SHOWROOM

Address:
Bear Glass Showroom
167 Mott St,
NY, NY 10013-5442
Phone: 212-219-1679
Email: sales@bearglass.com

An Introduction To Laminated Glass

Laminated glass is kind of glass that’s created by sandwiching a Polyvinyl Butyral (PVB) interlayer between 2, or more, pieces of glass. The benefit of exploitation shatterproof glass is that it are often safer once broken over alternative varieties of glass. When broken, the glass adheres to the interlayer, rather than shattering and severance of the frame.

Laminated glass also can provide natural philosophy management by reducing sound transmission through it. It can offer protection from crooked objects in minor weather events by fascinating energy impact of flying rubble while not shattering out of the frame. It can offer security in a window and door lite, resisting full penetration which can cause serious injury. This makes it a smart answer for replacement out-of-date glass in some buildings.

laminated glass pannel

Application of Laminated Glass

1.Art Galleries

2.Liquor Stores

3.Jewelry Shops

4.Schools

5.Churches

6.Banks

7.Government Buildings

8.Cash Counter of Stores

9.Post Offices

10.Combat or Security Vehicles

Laminated glass is most frequently created using toughened (non-tempered) glass, but the PVB layer keeps the glass along. In some cases, tempered glass is the right choice: shower enclosures, shelving, etc. However, laminated glass is currently specified solely within the International code (IBC) is now encouraging its use for glass handrails in instances wherever a walk is gift below. To read a lot of on that from lamiglass.us, go HERE.

 

laminated glass staircase
laminated glass staircase

Why use laminated glass?

  1. Safety
  2. Solar Energy Control
  3. UV Control
  4. Durability
  5. Design versatility
  6. Sound reduction

Lastly, remember that the offered sorts of PVB and glass sort combos square measure several. They can be ornamental, colorful, UV reducing, even laminated to specialty glass like our mirror. So assume to ask us next time you want laminated glass.

 

Bear Glass V-Grooving

V-Grooving

 

Bear Glass is the 4th generation family business specializing in working in glass. We are the largest stocking distributor of Walker glass in the nation.  Bear Glass products, offer a wealth of opportunities to architects, interior designers and decorators.  Any pattern can be designed by engraving a groove in the surface of the glass.  Our V-Grooving equipment is capable of producing custom engraved designs (commonly know as V-Grooving), with different profile engraving tools.

V-Grooving can be done on any architectural flat glass and mirrors.  Our V-Grooved glass can also be heat strengthened, tempered, and laminated.  Custom profiles are also available here at Bear Glass.  This is glass that has a groove or grooves put into it to create simple to complex designs for your liking.  Grooving can be used alone or even in combination with other design elements, such as silk screening, to create a myriad of patterns.

While most glass groovers are looking for high volume orders, which we like too, we’re happy to work with you to fill your low volume needs.  Polished, unpolished, straight, patterned, silhouetted.  These are just some examples of what Bear Glass can accomplish for you with our v-grooving.  If you want to add depth and beauty to an otherwise plain panel of glass for your new door line, wall system, window line, etc., you have found the right place!  Bear Glass is a world leader in v-grooving capabilities and is completely self-sufficient for v-grooving glass panels for doors, windows, and architectural applications.

Bear Glass is the largest capacity v-groove manufacturer in North America, and possibly the world.  We hold several U.S. patents in v-groove technologies, and with our ability to dress and shape our wheels in house, we are continually experimenting with new grooves and patterns.  Bear Glass V-grooved patterns split incoming light—almost like a prism—into a full spectrum of colors while exuding elegance and beauty.

Polished, unpolished, straight, patterned, silhouetted.  These are just some examples of what Bear Glass can accomplish for you with our v-grooving.  If you want to add depth and beauty to an otherwise plain panel of glass for your new door line, wall system, window line, etc., you have found the right place!  V-Grooved glass can also be heat strengthened, tempered, and laminated.  Custom profiles are also available.  Grooving can be used alone or in combination with other design elements, such as silk screening, to create a myriad of extraordinary patterns.  Bear GlassV-Grooving glass allows you to have a unique look to your windows and doors without having the traditional grids block your view.

While most glass groovers are looking for high volume orders, which we like too, we’re happy to work with you to fill your low volume needs.

For more information on our V-grooved Glass please contact Bear Glass at:

Bear Glass New York

Address: 399 20th Street Brooklyn, NY 11215

Phone: 718-832-3604 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

Bear Glass New Jersey:

Address: 359 Essex Road Tinton Falls New Jersey 07753

Phone: 732 901 2626 732 901 2626

Fax: 732 901 2266

E-mail: Sales@BearGlassNJ.com

Bear Glass adds two new distribution points!

Bear Glass is excited to announce that in addition to our existing Brooklyn NY and Tinton Falls NJ factory’s we have now added two new location in upstate New York as distribution centers!

Oneonta, NY 13820

Cobleskill, NY 13820

Bear Glass will now have four location with trucks on the road five days a week delivering to New York, New Jersey, Connecticut, and Pennsylvania.

Bear Glass also offers our rent a glass truck program. Whether big or small pieces we guarantee professional quality service, as well as quick delivery.  We are willing to properly and securely package the glass. We have the proper equipment to package glass artwork, showcases, and aquariums. We have glass truck racks that can transport large mirror and glass pieces. We insure fast and timely delivery to your business, company, factory, apartment, or house. After delivery we are fully capable of installing and setting up the glass in requested location. We will even move other people’s glass.

Bear Glass Does it all! There’s no order too big or too small, we want them all. When it comes to glass and mirror Bear Glass is proud to offer many products and services that our competitors don’t. Some of these products and services include: back painted glass, custom antique mirror, custom fish tanks, fire rated glass, laminated glass, mirrored furniture, mirror re-silvering, painted glass, patterned glass, sandblasting, tempered glass, two way mirror, wire glass, and v-grooving.

Get more information on all Bear Glass has to offer by clicking  here

Bear Glass can be contacted as follows:

Bear Glass New York

Address: 399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: Sales@bearglass.com

Bear Glass New Jersey

Address: 359 Essex Road

Tinton Falls New Jersey 07753

Phone: 732 901 262

Fax: 732 901 2266

Email: Sales@bearglassnj.com

Common Mirror Resilvering Questions

Frequently asked Mirror Re-silvering questions

Q: Is re-silvering needed?

A: Sometimes mirrors appear to be dirty or streaked on the front surface. The silvering on the back has no problem. So clean the mirror surface properly to check that it has no damage on the front surface.

Q: Is it possible to re-silver a small portion of the mirror?

A: Yes, it is possible to re-silver a portion of your mirror to re-silver. Unfortunately, satisfactory results are not guaranteed and are not always achieved by doing so. If you want the best result a complete re-silvering of the mirror is recommended.

Q: How long does Re-silvering last?

A: The re-silvering should last for decades. However, we can’t control the conditions in which mirrors are hung or mounted. Bathroom mirrors or other mirrors subject to excessive moisture has higher chances of getting disturbed quicker than mirrors in the bed room or other places.

Q: What is used to silver the surface of the mirror?

A: In Earlier mirror making silver was used to coat the glass surface. But in more recent times sputtering powdered aluminum or other compounds have been used in the place of silver. Therefore today, this process is also known as aluminizing. Which makes this service more cost effective.

Q: What if the edge of the m irror has Deterioration?

A: This is very common, frequently occurring on bathroom mirrors where moisture has puddled on the edges. It might not have been installed or sealed properly in the first place. If the mirror is large simple rectangle without bevels it will be cheaper to buy a new mirror than to have it re-silvered. One solution for the problem is to cut off the damaged area and then remount the mirror. Bear Glass also provides mirror cutting services for any thickness.

Q: Does Silver Paint touch up works as re-silvering?

A: No, It doesn’t. Using paint for re-silvering a mirror will get disappointing results. Mirror re-silvering process does involve many steps and techniques that is not possible at home unless you have the proper knowledge.

Get more information On all Bear Glass has to offer by clicking  here

For a quote on glass or mirror please contact  Bear Glass at:

Bear Glass New York

Address: 399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604 718-832-3604

Fax: 718-832-0786

E-mail: Sales@bearglass.com

Bear Glass New Jersey

Address: 359 Essex Road

Tinton Falls New Jersey 07753

Phone: 732 901 262

Fax: 732 901 2266

Email: Sales@bearglassnj.com

Bear Glass Has Super Grey Glass

Lately our customers have been asking us if we have grey glass in stock. And the answer is YES! Pilkington super grey glass combines stunning exterior aesthetics and unsurpassed interior glare control with the best solar control performance of any tinted float glass in the industry. On the outside, low-reflective super grey glass tinted Float Glass offers a dramatic, deep cool-grey appearance that increases visual privacy and dramatically reduces read-through from interior shading devices. Inside, it softens bright daylight and reduces glare, making it perfect for applications near computers and video display screens.

Product features & benefits include:

  • An uncoated float glass that provides the performance of a reflective glass.
  • Enhanced visual privacy and reduced read-through from interior shading devices.
  • Best solar control of any uncoated glass, super grey glass provides the lowest shading coefficient of any float glass and a better shading coefficient than many reflective glass products. This means super grey glass can help enhance interior comfort and reduce cooling loads.
  • Unsurpassed light and glare control improves visual privacy and reduces the need for blinds or shades. Super grey glass softens bright daylight and helps eliminate glare, making it the perfect “user-friendly” glass.
  • Low interior and exterior reflectance reduces interior glare and minimizes exterior daylight reflectance. Super grey glass is ideal where architectural designs or restrictions prohibit structures with high reflectance.
  • Ideal for Skylight applications requiring solar control with very low interior reflection, especially at night.
  • Distinctive aesthetics inside and out. Super grey glass offers a deep, cool-grey tint from the exterior, while providing a remarkably crisp, comfortable view from the interior. Super grey glass also provides color-neutral visibility from the inside, resulting in an undistorted, natural view
  • Uniform, no-read through look between spandrel and vision glass areas. The uniform appearance of super grey glass may eliminate the need for an opacifier in the spandrel glass.
  • Low UV  transmittance that significantly outperforms other tinted and coated glass products. 6mm super grey glass blocks 99% of the sun’s damaging UV rays.
  • Excellent Availability,   super grey glass can be inventoried for short lead times and improved control of project costs.

For more Information on all Bear Glass has to offer Please Contact Us at:

Bear Glass New York

Address:

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

Email: Sales@bearglass.com

Bear Glass New Jersey

Address:

359 Essex Road

Tinton Falls New Jersey 07753

Phone: 732 901 2626

Fax: 732 901 2266

Email: Sales@BearGlassNJ.com

Bear Glass brings Pilkington Optiwhite™ Glass To Our Valued Customers

Bear Glass is proud to offer Pilkington Optiwhite™ Low Iron Float Glass. We feel that by offering this product line we are able to offer the clear choice when it comes to colorless float glass.Why do we say this?Pilkington Optiwhite Float Glass virtually eliminates the green cast inherent in standard float glass, particularly noticeable in thicker glasses.When true color is of paramount importance, Pilkington Optiwhite™ Float Glass is the perfect solution.

Noticeably clearer than standard clear float glass, the colorlessness of Optiwhite Float Glass is especially apparent when it is combined with white or light colors, and when exposed, polished edges are in view.

As a result, Optiwhite Glass offers enhanced clarity and aesthetics for everything from photovoltaic modules and solar collectors to showroom and furniture applications. It is also ideal for glass which is to be ceramically decorated, because the true colors of the decorations will show through the glass.

Product Features

• PRACTICALLY COLORLESS, thanks to its low iron content, Optiwhite Float Glass virtually eliminates the green cast inherent in standard clear float, which is especially noticeable on exposed, polished edges. It also allows the true color of ceramic decoration to show through.

• UNLIMITED VERSATILITY and the absence of color make Optiwhite Glass ideal for applications such as security glazing laminates, I.G. units, photovoltaic modules, solar collectors, projection room windows, storefronts, appliances, shelving, display cases, zoo and aquarium enclosures, and tabletops.

• IMPROVED LIGHT TRANSMITTANCE makes this product ideal for applications which can benefit from more light. Compared to standard clear float, visible light transmittance for Optiwhite Glass is 2% higher in an 1/8

For more information on Bear Glass and our line of  Pilkington Optiwhite™ Glass. please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

If you are in New Jersey:

Bear Glass New Jersey

359 Essex Road

Tinton Falls New Jersey  07753

P: 732 901 262

Bear Glass New Jersey Acid Etched Glass

Bear Glass Is A Premier Walker Distributor. We are better able to serve our customers with 2 facilities located in both Brooklyn NY and Tinton Falls NJ. Our Motto is ” We Do Everything In Glass And Mirror” so we are able to service any and all your glass and mirror needs.

Bear Glass NJ Acid Etched Glass is becoming trendy in design and construction.  The consistency and durability of the finish can reduce glare and reflection, add privacy, increase light transmission, and provide texture.  It is important to select the right acid-etched glass for an application, and avoid making issues during storage and fabrication.  Although the glass-etching process is generally consistent, variations in chemistry and other parameters create different surfaces with distinct visual and performance characteristics.  Glass is etched with an aqueous solution of hydrofluoric acid, which attacks the silica and roughens the glass surface.  Generally, the more ‘white’ or opaque the finish, the more rough and porous the surface is.  When choosing distinctive and unique types of glass, architects and designers often have specific objectives in mind.  With acid-etched glass, these goals can relate to light diffusion, light transmission, privacy, visual appearance, integration with surrounding objects, and energy efficiency through increased day lighting.  An etched surface with rugged peaks and deep valleys absorbs and diffuses light, rather than transmitting or reflecting it- the result is a rich, white, opaque appearance.  In contrast, an etched surface with smooth, rounded bumps enhances light transmission and creates a more transparent glass, characterized by reduced reflective glare and a soft translucent appearance.

Acid-etched Surface Finish

Acid-etched finished vary by manufacturer.  The type selected for a glass substrate renders a different level of opacity and smoothness and creates varied visual effects.  It also impacts performance ratios such as gloss, visible light transmission (VLT), visible light reflectance, shading coefficient, solar direct transmission, solar direct reflectance, and U-value.  The visual effect of the acid-etch finish on mirror varies depending on the extent of etching performed.  A lighter-etched mirror has more reflection whereas a deeper etch creates a matte finish and more depth in the glass.

Glass Substrate

The substrate also influences the color appearance, level of opacity, and performance ratios of acid-etched glass.  Many falsely believe pieces of ultra-clear glass look the same, irrespective of their origin; similarly, glass with a blue tint from manufacturer ABC is often incorrectly perceived to match the one produced by manufacturer XYZ.  Generally, the glass business markets different shades of glass in ultra-clear, green, blue, or black.  In addition, some glass floaters can make varying shades of one color.  For example, acid-etched products manufactured from low-iron glass have a translucent satin appearance without the ‘greening effect’ of ordinary clear glass.  Similarly, a piece of acid-etched glass made with a dark blue hue from one supplier creates a different visual effect than one made with light blue from the same manufacturer.  Consequently, the shade of the acid-etched glass or mirror likely varies among manufacturers, depending on the substrate used.  It is important to remember the acid-etched finish itself creates a different color appearance, with different tints having varying performance ratios.

Etching on both sides

Etching glass on both sides can enhance its characteristics.  This approach is suitable for applications requiring a higher level of opacity or a similar finish and visual effect on both sides of the glass panel (e.g. partitions).  Most glass is produced by the float process.  The raw materials- mainly silica sand, soda ash, and limestone- are melted in a furnace and then flowed onto a bath of molten tin.  The glass then takes form and gradually cools as it moves from the tin bath to a controlled cooling chamber.  Float glass is best etched on the ‘air’ or ‘atmosphere’ side of the sheet, due to the greater likelihood of impurities and surface imperfections on the ‘tin’ side.  Production of acid-etched mirrors and two-sided etched glass requires etching of the tin side, posing an increased risk of defects in the surface if inappropriately done.   When considering double-sided acid-etched glass or acid-etched mirror, the type of finish specified impacts quality.  The manufacturer of the acid-etched product can recommend the finish (if any) suitable for the application.

Exterior applications

Bear Glass New Jersey Acid Etched Glass may be appropriate for exterior applications, such as insulated glazing (IG) units, skylights, and balustrades.  As acid-etching is not a coating, its resistance properties in outside conditions are essentially equivalent to non-etched glass.  However, it is important to note an etched surface with rugged peaks and deep valleys could lead to higher maintenance costs because dirt particles may be harder to remove.  Therefore, the use on an etched surface with a lighter finish (i.e. smooth, rounded bumps) is recommended in exterior applications.  In these situations, the level and type of maintenance required is similar to that of non-etched glass.

Storage and Fabrication

If proper care is taken during storage and fabrication, acid-etched glass or mirror can be kept clean as easily as non-etched products.  Whether the glass is tempered, laminated, insulated, painted, or even bent, fabricators can preserve the quality of the final product.  However, the general suggestions for keeping acid-etched glass or mirror stain-free during storage and fabrication may not be suitable in all situations.  Fabricators should follow guidelines issued by the manufacturer of a particular product to prevent or fix any marks or stains that occur.

Storage

Proper storage practices can help avoid marking on acid-etched glass and mirror.  Storage spaces must be dry and adequately ventilated.  Sheets should not be stored in areas of high humidity or heat (e.g. places near steam or water pipes).  Spaces exposed to chemical fumes should also be avoided.  All these conditions promote staining.  Conversely, sheets should not be stored outdoors or in unheated areas.

Fabrication

Due to the particular characteristics of more rugged glass surfaces, extra care should be taken during their fabrication to minimize the likelihood of embedding grease or dirt into the surface.  Gloves must always be used when working with sheets.  When handling sheets using equipment with suction cups, the clean and dust-free cups should be applied to the flat, untreated side.  If this is impossible, care should be taken to ensure proper vacuum is achieved (i.e. testing must be done to be certain the cups ‘stick’ to the glass to handle to weight).  When edging glass, these practices should be followed:

  1. The edging machine conveyors should be clean and free of grease and buildup of glass grindings or cerium oxide.
  2. The conveyor must be regularly opened and the machine interior washed (particularly the brushes) using soapy water.
  3. The front and back conveyor pads should be routinely brushed, until all traces of cerium oxide and glass grindings are removed.
  4. The front and back conveyors must be synchronized at identical speeds.
  5. Only coolants specifically recommended for glass grinding and that adhere closely to the manufacturer’s recommended dilution ration should be used.
  6. Manufacturer guidelines for concentration levels must be followed when using cerium oxide, with care taken to never add more than the minimal amount necessary for good polishing.
  7. Glass should be washed immediately after polishing.  Washer brushers with .36-mm (0.014-in) diameter nylon bristles offer the best results.  The glass washer should be equipped with one pair of upper and lower brushes for every 0.6m (2ft) per minute of travel- for example, a machine operating as a speed of 1.8m (6ft) per minute should have three pairs of brushes.  (This guideline is only applicable to regular float glass and not to coated products such as low-emissivity [low-e] glass).
  8. As an extra precaution, wetting the glass surface immediately before polishing greatly reduces the risk of marking.

Writing the Right Specifications

Architects and designers constantly look to Bear Glass for new ways to use glass in exterior and interior applications.  Writing proper specifications, especially when distinctive and unique types of glass are chosen, is critical to ensure the desired design is achieved.  Acid-etched glass is no exception.  If care is not taken, the glass ordered and installed on the jobsite may be nothing like the product selected based on samples submitted.  To ensure the acid-etched glass products selected are actually used by the general contractor, glass fabricator, and glazier, the following information should be included in the specifications: name of manufacturer, product brand name, glass thickness, substrate (glass or mirror), tint (e.g. clear, ultra-clear, blue, green, black, bronze, grey), type of finish (name), and whether to etch on one or two glass faces.  Warranties and standards are often overlooked when writing specifications.  Inherent in the float glass process are small gaseous inclusions and minor abrasions.  Consequently, occasional, small ‘bubbles’ and hairlines are normal and acceptable under recognized standards; from a normal viewing distance, they are barely noticeable.  To ensure acid-etched products are made from float glass that conforms to industry standards, the manufacturer should be consulted.  In Canada, glass should comply with Canadian General Standards Board (CAN/CSBG) 12.3-M91, Flat, Clear Float Glass (Quality: Glazing).  In the United States, ASTM International C 1036-01, Standard Specification for Flat Glass (Quality: Q3-Stock Sheet) should be followed.  The manufacturer’s product warranty should refer to these standards.  Clearly, it is important to be specific about the nature of the acid-etched glass product required.  Communicating specifications in detail to a glass professional can help ensure the chosen product meets desired goals and objectives.

For more information on Acid Etch Glass please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

If you are in New Jersey:

Bear Glass New Jersey

359 Essex Road

Tinton Falls New Jersey  07753

P: 732 901 2626

F: 732 901 2266

E: Sales@BearGlassNJ.com

Patterned Glass By Bear Glass In Brooklyn NY

Patterned glass is a not-perfectly-smooth structure with different patterns impressed on it. The depth, size and shape of the patterns largely determine the magnitude and direction of reflection. Patterned glass or Decorative glass by Bear Glass usually transmits only slightly less light than clear glass. It can be used for a variety of applications like interior design and decorations, furniture, windows, street furniture etc.

Patterned glass by Bear Glass is made with a rolled glass process. All rolled patterned glass begins as a batch of materials, including silica sand, soda, and lime. These materials are melted together in a tank, and then the molten glass mixture is fed onto a machine slab. The glass flows under a refractory gate which controls glass volume and speed then moves between two counter-rotating, water-cooled rollers. One of these rollers is embossed, imprinting a distinct pattern onto the soft surface of the glass while the other roller is smooth.

The result is a piece of glass that is patterned and textured on one side, while smooth on the reverse. The distance between the two rollers determines the ultimate thickness of the glass. After it moves between the rollers, patterned glass is annealed or cooled slowly in order to remove any residual stresses. Rolled patterned glass can then be cut by the expert artisans of Bear Glass into standard sizes or cut into customized sizes for a specific customer application.

Some popular patterns, known as camphor glass, combined the use of clear glass with an acid-finished design.

Basically patterned glass has a pattern impressed on one side of the glass which prevents someone from seeing though it, for privacy. Pattern glass can also be ordered in various tints as well. A common application of this sort is when used in privacy walls to separate one room from another. Patterned glass is not-perfectly-smooth structure with different patterns impressed on it.

Patterned glass by Bear Glass can be used in commercial, residential, office or specialty applications. They have various usage including shower doors and tub enclosures including frameless shower doors, interior partitions, translucent door and window treatments, foyers and vestibules, patio furniture, shelving, decorative furniture, and lighting fixtures. Pattern glass are available in large amount of patterns in Bear Glass stores.

Bear Glass ships their Patterned glass products worldwide. We do everything on glass.

For more information or to order your Patterned glass, please contact Bear Glass at:

 

Factory/ Office:

 

Address :

 

Bear Glass Inc.

 

399 20th Street

 

Brooklyn, NY 11215

 

Phone: 718-832-3604

 

Fax: 718-832-0786

 

E-mail: bearglass@yahoo.com

Patterned Acid-Etched Glass and Mirrors By Bear Glass in Brooklyn NY

Bear Glass Is The Premier Walker Glass Distributor

Bear Glass stocks all Walker’s Products in our 25000 SQFT facility located in Brooklyn New York and we would like to help our customers better understand the different patterned glass that we offer through Walker.

Walker Textures™ Nuance Stock Patterned Acid-Etched Glass and Mirror

Walker Textures™ Nuance Stock has been created to answer the growing demand for unique and environmentally friendly material for decorative and architectural applications. Patterned acid-etched glass and mirror will not only provide a great visual effect but a textural effect as well, due to the depth variation of the design.

The stock product line of acid-etched patterns is available in five distinctive designs with the 100 and 300 series. The 100 series is an acid-etched finish which combines Velour and Satin creating a true sense of privacy while maintaining a design element to the glass. The 300 series is our Satin finish on clear glass giving greater visibility to the decor through the glass. Both of these series feature a relief effect which adds character to the glass surface.

Patterned Acid-Etched Glass and Mirror Advantages

  • Consistent finish and appearance
  • Maintenance free
  • More mar-resistant than sandblasted glass
  • Does not peel or discolor like films
  • Does not scratch off like coatings

Glass – Velour on Satin


Glass – Satin on Clear

Patterned Acid-etched Glass and Mirror Specifications

Substrates : Glass and mirror

    • Colors: Clear, bronze, grey, black, green, blue or ultra-clear *
    • Glass thicknesses: 3 mm to 19 mm **
    • Mirror thicknesses: 3 mm to 6 mm **
    • Sizes available: Standard 96″ x 130″, on request 84” x 130” **
    • Finishes:

Series 100 Velour on Satin
Series 300 Satin on Clear

  • Selected skus available in less than 4, 000 pound quantities

Walker Textures™ Nuance Custom Acid-etched Glass and Mirror

A world of countless creative patterns opens up to you with Walker Textures™ Nuance Custom. Now you can let your imagination run wild and create virtually any design. Thanks to our continuous research and development we are achieving high-quality registration and an unmatched level of detail.

The custom product line features three different acid-etch combinations allowing you to obtain your desired result. The 100 series combines two of our finishes Velour on Satin. The 200 series is our Velour on clear glass and the 300 series is our Satin on clear glass. All of these combinations create a nice textural effect on the glass surface.


Custom Acid-etched Glass and Mirror Advantages

  • Consistent finish and appearance
  • Maintenance free
  • More mar-resistant than sandblasted glass
  • Does not peel or discolor like films
  • Does not scratch off like coatings

Custom Acid-etched Glass and Mirror Specifications

    • Substrates : Glass and mirror
    • Colors: Clear, bronze, grey, black, green, blue or ultra-clear *
    • Glass thicknesses: 3 mm to 19 mm **
    • Mirror thicknesses: 3 mm to 6 mm **
    • Sizes available: Standard 96″ x 130″, on request 84” x 130” **
    • Finishes:

Series 100 Velour on Satin
Series 200 Velour on Clear
Series 300 Satin on Clear

  • Minimum Quantity: 4, 000 pounds

* Tempering of ultra-clear glass is recommended to correct slight color variances caused by the Walker Textures™ Nuance manufacturing process.

** Subject to glass availability.

Bear Glass can help you choose your patterned acid etched glass product needs to best fit for your project and by the way, we ship patterned acid etched glass worldwide.

For more information or to order your patterned acid etched glass products, please contact  Bear Glass at:

 

Factory / Office

 

Address:

Bear Glass Inc.

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com