Bear glass does amazing glass edgework. Edgework is the process of shaping your glass and removing any uneven surfaces from the edge of the glass after it has been cut. This process enhances the appearance of the glass. The edges of the glass must always be processed before toughening. Edgework customizes products for table tops, counter tops or shelves. Bear Glass has the finest machines and crafts men to do the edgeworks that will rise your standard. We offer the following standard edgeworks. If you want a custom edgework for your piece of glass or mirror, please contact us. Remember we do everything in Glass and Mirror.
 |
Bevel Edge: Available in: 1/8″, 3/16″, 1/4″, 3/8″, 1/2″, 3/4″ |
 |
Bevel Both Sides Edge: Available in: 3/8″, 1/2″, 3/4″ |
 |
Double Bevel Edge: Available in: 3/8″, 1/2″, 3/4″ |
 |
Miter Edge: Available in: 1/4″, 3/8″, 1/2″, 3/4″ |
 |
Chamfer Edge: Available in: 1/4″, 3/8″, 1/2″, 3/4″ |
 |
Flat Polish/ Ground: Available in: 1/8″, 3/16″, 1/4″, 3/8″, 1/2″, 3/4″, |
 |
Pencil Polish/ Ground: Available in: 3/16″, 1/4″, 3/8″, 1/2″, 3/4″, |
 |
Ogee Edge: Available in: 1/2″, 3/4″ |
 |
Ogee Bevel Edge: Available in: 1/2″, 3/4″ |
 |
Water Fall Edge: Available in: 1/2″ |
 |
Clean Cut: Available in: Any Thickness |
 |
Seamed Edge: Available in: Any Thickness |
Bear Glass also does Edgeworks for Laminated Glass. On Laminated Glass edgeworks must be done before Heat Treating.
For more information on all Bear Glass has to offer contact:
FACTORY/ OFFICE
Address:
Bear Glass Inc.
399 20th Street
Brooklyn, NY 11215
Phone: 718-832-3604
Fax: 718-832-0786
E-mail: bearglass@yahoo.com
If you are in New Jersey:
Bear Glass New Jersey
359 Essex Road
Tinton Falls New Jersey 07753
P: 732 901 2626
F: 732 901 2266