Bear Glass Is A Premier Walker Distributor.  We are better able to serve our customers with 2 facilities located in both Brooklyn NY and Tinton Falls NJ.  Our Motto is “ We Do Everything In Glass And Mirror”, so we are able to service any and all your glass and mirror needs.

How to Select the Right Acid-Etched Glass

While the glass etching process is generally the same, variations in the chemistry and other process parameters will create different glass surfaces with varied visual and performance characteristics

• Light diffusion
• Privacy
• Glare reduction
• Dimensional effect
• Visual appearance
• Integration with surrounding objects
• Light transmission
• Energy efficiency

An etched surface with rugged peeks and deep valleys absorb and diffuses light, rather than transmit or reflect it, resulting in a rich white opaque appearance.  On the other hand, an etched surface with smooth rounded bumps enhances light transmission and creates a more transparent glass, characterized by reduced reflective glare and a soft translucent appearance.

The type of acid-etch surface finish selected will render a different level of opacity and smoothness as well as create varied visual effects.  It will also have an impact on the following performance ratios:

–          Gloss

–          Visible light transmission

–          Visible light reflectance

–          Shading coefficient

–          Solar direct transmission

–          Solar direct reflectance

–          U-Value

Also, bare in mind that the type of glass substrate used will impact on the above-mentioned characteristics. For example, acid-etched glass made out of low-iron glass (e.g. Starphire ultra-clear glass by PPG) will create a translucent satin appearance without the “greening effect” of ordinary clear glass.  Similarly, acid-etched blue glass made out of PPG’s blue Pacifica will create a different visual effect than one made with Pilkington’s Artic Blue.

Consequently, both the acid-etch finish and the glass substrate used will impact on the color appearance, level of opacity and performance ratios of the acid-etched glass.

In order to enhance certain characteristics of the acid-etched glass, you may also consider etching the glass on both sides.  This is a good approach for applications requiring a higher level of opacity or a similar finish and visual effect on both sides of the glass panel (e.g. partitions).

The use of acid-etched glass for exterior applications may also be appropriate.  Because acid-etching is not a coating, its resistance properties in exterior conditions are essentially equivalent to un-etched glass.  However, it is important to point out that an etched surface with rugged peeks and deep valleys could lead to higher maintenance costs because dirt particles may be more difficult to remove.  Therefore, the use of an etched surface with a lighter finish (smooth rounded bumps) is recommended in exterior applications.

As you can see, being specific about the nature of the acid-etched glass product required is very important.  Do not hesitate to share your design and performance intent to our glass professionals to ensure the acid-etched glass product selected meets your goals and objectives.

For more information on How to Select the Right Acid-Etched Glass please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

217-44 98th Ave., Queens Village, NY – 11429
United States
 +1 (718) 832-3604
 sales@bearglass.com

If you are in New Jersey:

Bear Glass New Jersey

359 Essex Road

Tinton Falls New Jersey  07753

Phone: 732 901 2626

Fax: 732 901 2266

Email: Sales@BearGlassNJ.com

The post Bear Glass Can show You How To Select The Right Acid-Etched Glass appeared first on Bear Glass Blog.

Stained glass furniture is not often explained in one sentence unless you have seen the visually offbeat collections. Stained glass furniture is not seen often these days though it gives an extra complement to your interior. These set of antique stained glass chair designs and the large glass table top together form an impressive dinner table and chair set. Making stained glass furniture requires intense concentration and a high degree of skill. Small pieces of colored glass are cut and closely fixed to complete the intricate design. Stained glass table tops and counter tops are so much popular in these days. Stained glass bed side table, room partitions, wardrobe doors are also available at Bear Glass.

Stained glass kitchen cabinet doors kitchen design marvelous cozy glass kitchen cabinet doors with. Large sized modern wall kitchen cabinet glass doors are available at Bear Glass. Kitchens offer a lot of opportunities to incorporate stained and leaded glass elements. Cabinet doors are the ideal places to apply stained glass. You can use all clear glass if you want to treat the cabinet as a display case, or you can use colors to block the view into your cabinet while displaying an exclusive piece of art and enriching the decor of your kitchen. Incorporating stained glass into your cabinets will give a luxurious look to your kitchen, too.

We have also installed stained glass in pantry doors and in the doors that lead to a wine room.

Many kitchen windows face the side of your neighbor’s house, whether it’s their siding or a view of a window leading directly into their home, as well as your own. This view is not always the most attractive or desirable. Additionally, it can give some homeowners a reason to be concerned about their privacy. By utilizing stained and leaded glass, your eyes will be drawn from the ugly view while simultaneously preventing views into your home from outsiders.

Benefits of Stained Glass Furniture

• Draw attention to glass and away from other imperfections in your home
• Make your home appear vintage and classy
• Make a great first impression on potential buyers
• Get your home stand out from other houses at similar price points.

Bear Glass offers custom stained glass windows, interior doors, shower doors, cabinet doors and also any type furniture for sale at a competitive price. Stained glass creates an outstanding appearance. Bear Glass provides custom stained glass cutting, installation service and fabrication in Brooklyn, NY and all over the USA and Canada. So if you want to get custom stained glass furniture, contact us.

The post Stained Glass Furniture-A Complement To The Interior appeared first on Bear Glass Blog.

Bear Glass is the 4th generation family business specializing in Glue Chip Glass.  We stock the largest variety of flat glass in a variety of sizes and color, customizing your Glue Chip Glass.  Alongside of glue chipping we can also fabricate your glass to your needs, from cutting to beveling and more, making Bear Glass your one time glass shop. Glue Chip Glass is basically clear and used for visual diffusion.  This obscure texture allows maximum light to pass while giving cool frozen frost type texture to view.

Glue chipping is the simple process of coating glass with an animal hide glue to the surface of the glass.  The glue which was melted in a double boiler will flow on the surface of the glass about 1/16″ thick.  For best result some artist prefer to sandblast the glass before applying the glue.  As the glue dries (key point) it will contract and chip the surface.

Thus, the term glue chipping. Many factors are key to successful glass chipping.  Some factors are humidity, glass surface, heat, and time.  Additional techniques can be used with glass chipping such as masking off a design on the glass to prevent chipping.  Many sign makers do this for lettering.   Silvering the back or front of chipped glass creates a great mirror.

Glue Chip Glass is a texture that looks like frost during the winter or fern like pattern on a window pane.  This attractive random pattern is created by applying hot animal glue to the sandblasted surface of clear float glass and as it dries, the glue shrinks and cools removing flakes of glass from the surface.   Glue chip glass technique can be used with clear or tinted glass as well as mirrors.  If extra strength is needed it may also be tempered.

As the glue dries, and contracts, it pulls flakes of glass off the surface in a random fashion.  Glue chip glass is very popular for backgrounds in windows and cabinets and is especially beautiful combined with bevels and bevel clusters.

Think outside the box and design your kitchen or bath with our beautiful G lue Chip Glass that will stand out from the ordinary.   Glue Chip Glass that has a frosted design with a very interesting process gives the glass this unique and individual design, and is popular as a  glass room divider panel.  Adding a lot more privacy and separation, yet still allowing the light to flow through it.  Many windows and doors use this technique to add elegance to its environment.  It has been used occasionally in signs and in stained glass windows since the early 20th century.   Glue chip special properties allows every design to be different, giving a uniqueness to every piece of glass or mirror.

Our Glue Chip Glass gives uniqueness to any mirror.  Glass off the surface in a random fashion.  Glue chip glass is very popular for backgrounds in windows and cabinets and bevel clusters.

For more information on our Glue Chip Glass please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

If you are in New Jersey:

Bear Glass New Jersey

359 Essex Road

Tinton Falls New Jersey 07753

P: 732 901 2626

F: 732 901 2266

E: Sales@BearGlassNJ.com

The post Bear Glass Glue Chip Glass Is A Unique Way To Showcase Your Home Or Business. appeared first on Bear Glass Blog.

When It comes to glass flooring, Bear Glass is the industry leader. You’ll be surprised at how many commercial establishments, builders and home owners are now picking glass flooring to add a touch of glamour to their spaces.  There’s no denying that glass flooring looks ‘with it’ and glamorous. It comes in various shapes, sizes, colors and textures and does look super cool. It especially looks wonderful in contemporary spaces with minimalistic furniture in sleek, straight lines.  Plus, glass floors are durable; most glass tiles are made with reinforced glass and are quite sturdy.  Want another pro to glass flooring?  Glass floors are bacteria and dirt-resistant; glass tiles are less prone to accumulating grime and bacteria. Because of its smooth and non-porous quality it is moisture-resistant and never gathers mold.  It’s therefore a hygienic option to choose. 

Bear Glass fabricates all of our glass flooring and glass tread products specifically for each project’s specifications. This allows us to provide our customers with the safest possible glass for their project. We are committed to excellence, and thus we only use methods that ensure the safest and most beautiful glass flooring and glass tread products. You can expect the best quality and workmanship when working with Bear Glass. Bear Glass provides an exciting combination of style and function, making a dramatic impact in both residential and commercial spaces.  Engineered with safety and durability as the foremost objectives, Bear Glass’ glass flooring provides a unique alternative to traditional material in both structural and non-structural applications.  Each glass flooring installation involves careful engineering and construction of the entire flooring system with safety as the top priority.  This includes glass panels, anti-slip walking surfaces, and support structures.  All fabrication and construction is completed in-house at our modern glass fabrication facility to ensure quality, minimize delivery lead-times, and reduce overall project cost.  Let us help you create a lasting impression through our unique and functional design glass floors. Our glass products create the feeling of openness and exceptional light transmission.

Glass flooring is usually used in a small area as a design element.  You could use it in your living room or an office atrium or even on a mezzanine floor.  Your glass tiles could also be back-lit to draw more attention.  This has become a common feature in many clubs, restaurants and hotels.  Glass bottomed pools in hotel terraces are an interesting emerging trend.  If you’re truly looking to dazzle, especially with a project of a massive scale, you could make an entire top floor of a high-rise have only glass flooring.

For more information and help for all of your Glass Floor needs, contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20th Street    

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

If you are in New Jersey:

Bear Glass New Jersey

359 Essex Road

Tinton Falls New Jersey  07753

P: 732 901 2626

F: 732 901 2266

E: Sales@BearGlassNJ.com

The post Glass Floors By Bear Glass appeared first on Bear Glass Blog.

Bear Glass Is A Premier Walker Distributor. We are better able to serve our customers with 2 facilities located in both Brooklyn NY and Tinton Falls NJ. Our Motto is ” We Do Everything In Glass And Mirror” so we are able to service any and all your glass and mirror needs.

Bear Glass NJ Acid Etched Glass is becoming trendy in design and construction.  The consistency and durability of the finish can reduce glare and reflection, add privacy, increase light transmission, and provide texture.  It is important to select the right acid-etched glass for an application, and avoid making issues during storage and fabrication.  Although the glass-etching process is generally consistent, variations in chemistry and other parameters create different surfaces with distinct visual and performance characteristics.  Glass is etched with an aqueous solution of hydrofluoric acid, which attacks the silica and roughens the glass surface.  Generally, the more ‘white’ or opaque the finish, the more rough and porous the surface is.  When choosing distinctive and unique types of glass, architects and designers often have specific objectives in mind.  With acid-etched glass, these goals can relate to light diffusion, light transmission, privacy, visual appearance, integration with surrounding objects, and energy efficiency through increased day lighting.  An etched surface with rugged peaks and deep valleys absorbs and diffuses light, rather than transmitting or reflecting it- the result is a rich, white, opaque appearance.  In contrast, an etched surface with smooth, rounded bumps enhances light transmission and creates a more transparent glass, characterized by reduced reflective glare and a soft translucent appearance.

Acid-etched Surface Finish

Acid-etched finished vary by manufacturer.  The type selected for a glass substrate renders a different level of opacity and smoothness and creates varied visual effects.  It also impacts performance ratios such as gloss, visible light transmission (VLT), visible light reflectance, shading coefficient, solar direct transmission, solar direct reflectance, and U-value.  The visual effect of the acid-etch finish on mirror varies depending on the extent of etching performed.  A lighter-etched mirror has more reflection whereas a deeper etch creates a matte finish and more depth in the glass.

Glass Substrate

The substrate also influences the color appearance, level of opacity, and performance ratios of acid-etched glass.  Many falsely believe pieces of ultra-clear glass look the same, irrespective of their origin; similarly, glass with a blue tint from manufacturer ABC is often incorrectly perceived to match the one produced by manufacturer XYZ.  Generally, the glass business markets different shades of glass in ultra-clear, green, blue, or black.  In addition, some glass floaters can make varying shades of one color.  For example, acid-etched products manufactured from low-iron glass have a translucent satin appearance without the ‘greening effect’ of ordinary clear glass.  Similarly, a piece of acid-etched glass made with a dark blue hue from one supplier creates a different visual effect than one made with light blue from the same manufacturer.  Consequently, the shade of the acid-etched glass or mirror likely varies among manufacturers, depending on the substrate used.  It is important to remember the acid-etched finish itself creates a different color appearance, with different tints having varying performance ratios.

Etching on both sides

Etching glass on both sides can enhance its characteristics.  This approach is suitable for applications requiring a higher level of opacity or a similar finish and visual effect on both sides of the glass panel (e.g. partitions).  Most glass is produced by the float process.  The raw materials- mainly silica sand, soda ash, and limestone- are melted in a furnace and then flowed onto a bath of molten tin.  The glass then takes form and gradually cools as it moves from the tin bath to a controlled cooling chamber.  Float glass is best etched on the ‘air’ or ‘atmosphere’ side of the sheet, due to the greater likelihood of impurities and surface imperfections on the ‘tin’ side.  Production of acid-etched mirrors and two-sided etched glass requires etching of the tin side, posing an increased risk of defects in the surface if inappropriately done.   When considering double-sided acid-etched glass or acid-etched mirror, the type of finish specified impacts quality.  The manufacturer of the acid-etched product can recommend the finish (if any) suitable for the application.

Exterior applications

Bear Glass New Jersey Acid Etched Glass may be appropriate for exterior applications, such as insulated glazing (IG) units, skylights, and balustrades.  As acid-etching is not a coating, its resistance properties in outside conditions are essentially equivalent to non-etched glass.  However, it is important to note an etched surface with rugged peaks and deep valleys could lead to higher maintenance costs because dirt particles may be harder to remove.  Therefore, the use on an etched surface with a lighter finish (i.e. smooth, rounded bumps) is recommended in exterior applications.  In these situations, the level and type of maintenance required is similar to that of non-etched glass.

Storage and Fabrication

If proper care is taken during storage and fabrication, acid-etched glass or mirror can be kept clean as easily as non-etched products.  Whether the glass is tempered, laminated, insulated, painted, or even bent, fabricators can preserve the quality of the final product.  However, the general suggestions for keeping acid-etched glass or mirror stain-free during storage and fabrication may not be suitable in all situations.  Fabricators should follow guidelines issued by the manufacturer of a particular product to prevent or fix any marks or stains that occur.

Storage

Proper storage practices can help avoid marking on acid-etched glass and mirror.  Storage spaces must be dry and adequately ventilated.  Sheets should not be stored in areas of high humidity or heat (e.g. places near steam or water pipes).  Spaces exposed to chemical fumes should also be avoided.  All these conditions promote staining.  Conversely, sheets should not be stored outdoors or in unheated areas.

Fabrication

Due to the particular characteristics of more rugged glass surfaces, extra care should be taken during their fabrication to minimize the likelihood of embedding grease or dirt into the surface.  Gloves must always be used when working with sheets.  When handling sheets using equipment with suction cups, the clean and dust-free cups should be applied to the flat, untreated side.  If this is impossible, care should be taken to ensure proper vacuum is achieved (i.e. testing must be done to be certain the cups ‘stick’ to the glass to handle to weight).  When edging glass, these practices should be followed:

1. The edging machine conveyors should be clean and free of grease and buildup of glass grindings or cerium oxide.
2. The conveyor must be regularly opened and the machine interior washed (particularly the brushes) using soapy water.
3. The front and back conveyor pads should be routinely brushed, until all traces of cerium oxide and glass grindings are removed.
4. The front and back conveyors must be synchronized at identical speeds.
5. Only coolants specifically recommended for glass grinding and that adhere closely to the manufacturer’s recommended dilution ration should be used.
6. Manufacturer guidelines for concentration levels must be followed when using cerium oxide, with care taken to never add more than the minimal amount necessary for good polishing.
7. Glass should be washed immediately after polishing.  Washer brushers with .36-mm (0.014-in) diameter nylon bristles offer the best results.  The glass washer should be equipped with one pair of upper and lower brushes for every 0.6m (2ft) per minute of travel- for example, a machine operating as a speed of 1.8m (6ft) per minute should have three pairs of brushes.  (This guideline is only applicable to regular float glass and not to coated products such as low-emissivity [low-e] glass).
8. As an extra precaution, wetting the glass surface immediately before polishing greatly reduces the risk of marking.

Writing the Right Specifications

Architects and designers constantly look to Bear Glass for new ways to use glass in exterior and interior applications.  Writing proper specifications, especially when distinctive and unique types of glass are chosen, is critical to ensure the desired design is achieved.  Acid-etched glass is no exception.  If care is not taken, the glass ordered and installed on the jobsite may be nothing like the product selected based on samples submitted.  To ensure the acid-etched glass products selected are actually used by the general contractor, glass fabricator, and glazier, the following information should be included in the specifications: name of manufacturer, product brand name, glass thickness, substrate (glass or mirror), tint (e.g. clear, ultra-clear, blue, green, black, bronze, grey), type of finish (name), and whether to etch on one or two glass faces.  Warranties and standards are often overlooked when writing specifications.  Inherent in the float glass process are small gaseous inclusions and minor abrasions.  Consequently, occasional, small ‘bubbles’ and hairlines are normal and acceptable under recognized standards; from a normal viewing distance, they are barely noticeable.  To ensure acid-etched products are made from float glass that conforms to industry standards, the manufacturer should be consulted.  In Canada, glass should comply with Canadian General Standards Board (CAN/CSBG) 12.3-M91, Flat, Clear Float Glass (Quality: Glazing).  In the United States, ASTM International C 1036-01, Standard Specification for Flat Glass (Quality: Q3-Stock Sheet) should be followed.  The manufacturer’s product warranty should refer to these standards.  Clearly, it is important to be specific about the nature of the acid-etched glass product required.  Communicating specifications in detail to a glass professional can help ensure the chosen product meets desired goals and objectives.

The post Bear Glass New Jersey Acid Etched Glass appeared first on Bear Glass Blog.

Bear Glass does everything in glass and mirror! We are a premier Dreamwalls Glass distributor. We have fabrication facilities in both Brooklyn New York, and Tinton Falls NJ. Dreamwalls Color Glass is manufactured using a propietary paint technolgy developed specifically for superior adhesion to glass.

From upscale commercial interiors to just about anywhere tile can be installed on walls, back painted glass adds brilliant color, shine and sophistication without the high maintenance grout lines. Transform ordinary walls into stunning interiors with Back Painted Glass. Widely popular in Europe, reverse and back painted glass is the perfect alternative to traditional tile, paint, and wallpaper, offering a custom glass finish that is modern, clean, seamless, vibrant, and hygienic.

The modern elegance makes this solution perfect for kitchens, bathrooms, showers, and many other areas of the home. In fact, back painted glass is so clean lined and beautiful, that it is increasingly being specified by leading interior designers and architects for new and innovative residential applications such as kitchen backsplashes, bathroom & shower walls, bar splashbacks, closet doors, cabinets, and furniture as well as for upscale commercial interiors, offices, and hotels.

There are currently 12 stock colors of annealed Dreamwalls Color Glass ready to ship. However, the color possibilities are limitless due to a computerized intermix system and our trained staff of color experts who ensure that the color you specify is the color you see. You choose a color from any color deck you use in your day-to-day business, and our experts can match it.

After the glass is coated with our unique paint, it is heat-cured and coated again with a backing paint for additional protection that is also heat-cured. This ensures that the paint remains durable during handling and fabrication to reduce the liklihood of scratches and cut-throughs.

Backpainted glass panels are available on either plate or low-iron glass. Custom shapes and edgework are also available. Back-painted glass is ideal for use in architectural elements such as walls, countertops, and glass backsplashes. When opacity and an easily cleaned surface are required, yet a specific color is preferred, backpainted glass is an excellent choice.

Benefits of Dreamwalls Color Glass:

• Easy to clean
• Moisture resistant
• Limitless color matching
• Hygienically non-porous
• Durable
• Temperable

We match the color codes of all leading paint manufacturers, including Benjamin Moore, Sherwin Williams, Kelly Moore, and many others. Computer color matching is also available.

Looking to add even more depth to your Bear Glass Back Painted Glass? Our textured glass can be color-coated on the smooth side or textured side. Each alternative produces its own unique look.

MORE BACK PAINTED FACTS:

• Bear Glass Back Painted Glass is durable, nonporous and easy to install. And with no grout lines, cleaning is fast and easy.
• With a standard sheet size of 84” x 130”, most projects can be done with very few seams, if any.
• Bear Glass Back Painted Glass is available in all standard glass thicknesses: 1/8”, 1/4?, 3/8”, 1/2?, 3/4?, and 1”.
• You can cut Bear Glass Back Painted Glass to virtually any shape. You can drill, notch, temper, and even bend it.

Bear Glass Back Painted Glass countertop edges can be flat-polished, pencil-polished, beveled, bull-nosed, mitered, ogee or chipped.

Samples are easily available

We’re happy to provide dealer showroom samples of the various colors, thicknesses and textures of Bear Glass Back Painted Glass.

The cost for individual samples for specific jobs is $45 each. We’ll credit the cost of up to two samples when the job is completed.

Bear Glass ships their back painted glass products worldwide. We do everything in glass and mirror.

For more information or to order your  back painted glass, please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post Bear Glass Does Back Painted Glass In New Jersey And New York appeared first on Bear Glass Blog.

Resin Stained Glass is one of the new processes by Bear Glass when you can lay down just any design you want on the glass in variety of colors. The resin is applied to the outer layer of glass, using a stained resin machine. Bear Glass applies the resin also to mirrored glass. Traditional handcrafted Resin Stained Glass by Bear Glass has long been recognized for its beauty and dazzling visual impact.

Bear Glass does not use any lead strips in the process of making the Resin Stained Glass but instead uses UV stable, colorfast acrylic resins. The acrylic resin is extremely durable and one can easily compare it with a toughened glass.

Bear Glass can do a whole range of standard Resin Stained Glass designs, still we believe on the visions of our customers. Resin Stained Glass by Bear Glass can really transform a dull back door piece of glass or be used to make a big centerpiece in a landing or hallway. Bear Glass creates beautiful Resin Stained Glass for door panels, windows, fanlights, mirrors etc. The choice of design, color and texture is extensive.

Bear Glass can make faceted glass windows with Resin Stained Glass. Bear Glass artisans use one inch (2.5 cm) thick slabs of glass, cut into the desired shapes then selectively faceted on the interior edges to enhance the refraction of light. Then an epoxy resin is poured between each piece to create the structural matrix. Finally, the resin is covered with a layer of colored granules.

Bear Glass combines the resin stain with silk screening and glass grooving to create even more texture and depth in your design. For came colors you aren’t limited as you are with traditional leaded beveled glass designs.  With Resin Stained glass by Bear Glass you can have red, white, taupe, gun metal, just about any color you want.

One thing to note here is that Resin Stained Glass isn’t a good choice if one just needs a handful of pieces. But for doing multiple pieces this is a beautiful solution for unlimited design capabilities.

One big difference between the Resin Stained Glass and traditional decorative leaded beveled glass is, you can make dual IG units out of them as the Resin stain is applied to tempered glass also.

The advantages of Resin Stained Glass by Bear Glass are:

• Unlimited Design Possibilities: Any design that can be drawn on paper can be reproduced as a stained glass pattern.
• Cost effective: One-half to two-thirds the cost of traditional stained glass, even for one-off designs.
• Energy efficiency: The stained glass pattern can be put directly on modern double or triple paned glass, even on glass that is in a manufactured window sash.
• Cost effective custom work: Computer design and modern manufacturing techniques keep the cost on custom work to about one half the cost of traditional stained glass.
• High volume production runs feasible: The robotic CNC resin dispensing table enables high volume runs with excellent accuracy and reproducibility for every piece.

Bear Glass ships their Resin Stained Glass products worldwide. We do everything on glass.

For more information or to order your Resin Stained Glass from Bear Glass, please contact with Bear Glass at:

Factory / Office

Address :

Bear Glass Inc.

399 20^th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post Resin Stained Glass by Bear Glass In Brooklyn New York appeared first on Bear Glass Blog.

Glass stairs or glass staircases are becoming more and more common day to day. Glass staircases at home are one of the first things that people notice. Bear Glass use glass components for glass staircase systems; i.e. glass stair treads and glass balustrade infill panels to make an average house look contemporary and modern.

Glass stair treads are usually manufactured using a combination of 10mm float and 25mm float, laminated together. A non slip surface can be achieved in several ways, the most popular being an all over sandblast and Ritec coat finish.  Another popular anti-slip preference is for grooves to be cut into the front edge of the tread.

A custom built glass staircase is only limited by the designer’s imagination, and can make use of a wide variety of materials to produce what are often strikingly original forms.

Most of us probably take our staircase for granted and think of it as a simple way to ascend or descend between floors. Stairs usually take center stage at the entrance to our home, so Bear Glass can let you through the wide range of staircase styles and trends to optimize their performance.

Here are few tips from Bear Glass while choosing the right stairs design:

• Style – match your staircase to the style of home
• Needs – do you need storage underneath
• Natural home lightening– staircases can be dark so strategically position windows
• Flooring surface– match your floor with your stairs
• Safety – what are the capabilities of the homeowners, like children/elderly persons
• Avoid tripping points – differ surfaces on entering and exiting so your body visualizes and feels the change

With so many years of glass staircase design and production experience, Bear Glass can produce according to the design that you like. As a leading glass staircase manufacturer, we pride ourselves on quality and price of our glass products. Bear Glass ships their products nationwide. We do everything on glass.

For more information or to order the design for your glass staircase, please contact Bear Glass at:

FACTORY/ OFFICE:

Address:

Bear Glass Inc.

399 20^th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post Glass Staircases By Bear Glass Brooklyn NY appeared first on Bear Glass Blog.

Bear Glass Is The Premier Walker Glass Distributor

Bear Glass stocks all Walker’s Products in our 25000 SQFT facility located in Brooklyn New York and we would like to help our customers better understand the different patterned glass that we offer through Walker.

Walker Textures Nuance Stock Patterned Acid-Etched Glass and Mirror

Walker Textures Nuance Stock has been created to answer the growing demand for unique and environmentally friendly material for decorative and architectural applications. Patterned acid-etched glass and mirror will not only provide a great visual effect but a textural effect as well, due to the depth variation of the design.

The stock product line of acid-etched patterns is available in five distinctive designs with the 100 and 300 series. The 100 series is an acid-etched finish which combines Velour and Satin creating a true sense of privacy while maintaining a design element to the glass. The 300 series is our Satin finish on clear glass giving greater visibility to the decor through the glass. Both of these series feature a relief effect which adds character to the glass surface.

Patterned Acid-Etched Glass and Mirror Advantages

• Consistent finish and appearance
• Maintenance free
• More mar-resistant than sandblasted glass
• Does not peel or discolor like films
• Does not scratch off like coatings

Glass – Velour on Satin

Glass – Satin on Clear

Patterned Acid-etched Glass and Mirror Specifications

Substrates : Glass and mirror

• Colors: Clear, bronze, grey, black, green, blue or ultra-clear *
• Glass thicknesses: 3 mm to 19 mm **
• Mirror thicknesses: 3 mm to 6 mm **
• Sizes available: Standard 96″ x 130″, on request 84” x 130” **
• Finishes:

Series 100 Velour on Satin
Series 300 Satin on Clear

• Selected skus available in less than 4, 000 pound quantities

Walker Textures Nuance Custom Acid-etched Glass and Mirror

A world of countless creative patterns opens up to you with Walker Textures Nuance Custom. Now you can let your imagination run wild and create virtually any design. Thanks to our continuous research and development we are achieving high-quality registration and an unmatched level of detail.

The custom product line features three different acid-etch combinations allowing you to obtain your desired result. The 100 series combines two of our finishes Velour on Satin. The 200 series is our Velour on clear glass and the 300 series is our Satin on clear glass. All of these combinations create a nice textural effect on the glass surface.

Custom Acid-etched Glass and Mirror Advantages

• Consistent finish and appearance
• Maintenance free
• More mar-resistant than sandblasted glass
• Does not peel or discolor like films
• Does not scratch off like coatings

Custom Acid-etched Glass and Mirror Specifications

• Substrates : Glass and mirror
• Colors: Clear, bronze, grey, black, green, blue or ultra-clear *
• Glass thicknesses: 3 mm to 19 mm **
• Mirror thicknesses: 3 mm to 6 mm **
• Sizes available: Standard 96″ x 130″, on request 84” x 130” **
• Finishes:

Series 100 Velour on Satin
Series 200 Velour on Clear
Series 300 Satin on Clear

• Minimum Quantity: 4, 000 pounds

* Tempering of ultra-clear glass is recommended to correct slight color variances caused by the Walker Textures Nuance manufacturing process.

** Subject to glass availability.

Bear Glass can help you choose your patterned acid etched glass product needs to best fit for your project and by the way, we ship patterned acid etched glass worldwide.

For more information or to order your patterned acid etched glass products, please contact  Bear Glass at:

Factory / Office

Address:

Bear Glass Inc.

399 20^th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post Patterned Acid-Etched Glass and Mirrors By Bear Glass in Brooklyn NY appeared first on Bear Glass Blog.

The idea of  ClearShield began in 1982, in London.  ClearShield is a new technology that is used for glass surface protection. This technology was actually introduced to the marine industry as the marines got to work with harsh environments. Presently the upgraded technology of  ClearShield is also used in commercial and residential glass and window applications.

ClearShield system helps to protect your glass surface. Metal rust, water spots make your glass surface hasty and unclear. Mostly the window glasses and shower doors suffer from such problems as they remain exposed to water or the environment.  ClearShield helps  save glass surfaces from any kind of stain or watermark and make it look like the new.

Bear Glass is a fourth generation glass and mirror company and has proven its expertise in all kinds of glass work. Bear Glass promotes the usage of  ClearShield technology when purchasing products that may be susceptible to water damage overtime so that it can be ensured that the glass lasts longer no matter where it is placed, be it a window glass or a shower door,   ClearShield we feel is your answer .

Protection with ClearShield is the ideal solution for sandblasted and acid-etched glass as it resists fingerprinting and staining, while maintaining the beautiful appearance of decorative glass.

Now if you are wondering about how  ClearShield works on your sandblasted items,   ClearShield creates a cover or protection on the glass surface that prevents other hazardous materials from damaging the glass. The polymeric resin provides the protection for the glass from any kind of chemical reaction and helps to keep it clean.

Bear Glass uses  ClearShield technology for their glass products. Shower doors by Bear Glass or window glass by  Bear Glass can be protected by  ClearShield glass protection. Before delivering, these products are always been tested by experts to know whether these products are going to give you the best what  Bear Glass always promises to you.

ClearShield technology does not only prevent your bathroom shower glass or windows from getting stained with water-marks or rusts, but it also enriches the strength of the glass  for long periods of time.  ClearShield coats over glass ensure a clean view through the glass, along with the environmental hygiene inside the room as the cover does not let the germs in or the bacterium grow on the glass surface.

Bear Glass recommends the advanced  ClearShield technology for glass so that you can expect  the best effect e when you order your glass products products from  Bear Glass.

Bear Glass is always here to help you with all your glass and mirror needs.  We do everything on glass.

Bear Glass ships all kinds of glass products nation-wide. For more information or to order your glass product, please contact  Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20^th Street

Brooklyn , NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post ClearShield Glass Protection by Bear Glass appeared first on Bear Glass Blog.