water jet cutting Archives - Bear Glass Blog https://bearglassblog.com/tag/water-jet-cutting/ Fri, 13 Mar 2026 14:48:54 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://bearglassblog.com/wp-content/uploads/2015/08/cropped-Bear_logo1-1-75x75.png water jet cutting Archives - Bear Glass Blog https://bearglassblog.com/tag/water-jet-cutting/ 32 32 Cut It Out – With Our Water Jet Cutting Machine https://bearglassblog.com/cut-it-out-with-water-jet-cutting-machine/ Thu, 22 Feb 2018 11:47:33 +0000 http://bearglassblog.com/?p=5020 The water jet cutting machine is an industrial tool capable of slicing into metal or other materials using a jet of water at high velocity and pressure, or a mixture of water and an abrasive substance. The process is essentially the same as water erosion found in nature but accelerated and concentrated by orders of magnitude. Abrasive water jet cutting technology is a great method for cutting glass because it allows for contours and shapes that cannot be achieved with other cutting machines at a reasonable cost. From artistic tabletop inlays to detailed stained glass designs, mirrors, replacement windows for and more, there is almost no glass cutting application that a waterjet cutting machine from Bear Glass waterjet can’t tackle. Glass has a tendency to shatter, so it is very important that the initial holes are produced with a reduced pressure. Subsequently, the pressure must be increased to a cutting speed that is cost-effective. For glass, and other materials, which are crackable, you must gently raise and reduce the cutting pressure by means of proportional pressure control of the intensifier pump, otherwise, the material would be destroyed. Water jet cutting machine does not vibrate the glass, there are no heat-affected zones, or leave behind rough edges, almost no secondary finishing is required. Reduce your cut-out processing time by 75% with waterjet! Today, this technology is used for power point cutouts in glass splash-backs, holes for door hardware, balustrade panels, shower screens mirrors and tabletop inlays. From a long time in quality, waterjet cutting is the best idea to cut a glass or mirror. We are one of the nation’s leading manufacturers of fabricated glass and mirror. Our experienced team works diligently with the latest machinery and cutting technology. We are equipped to handle the most intricate tasks. From the water jet cutting process being applied to the glass and mirror, then as long as you can handle it. Water jet cutting machine can cut it: Key Benefits of Glass with Waterjet Cutting At Bear Glass, we are pride ourselves on staying up to date and keeping up with latest cutting technology. Water jet cutting machine is used both for the thin and thick glass to cut and detailed with a precise cutting stream. Be it glass tabletop, shower door, large glass wall blocks, or antique mirror waterjet can cut everything with perfection. So if you need to cut any type of glass and mirror with a custom shape and size, Contact us.

The post Cut It Out – With Our Water Jet Cutting Machine appeared first on Bear Glass Blog.

]]>

The water jet cutting machine is an industrial tool capable of slicing into metal or other materials using a jet of water at high velocity and pressure, or a mixture of water and an abrasive substance. The process is essentially the same as water erosion found in nature but accelerated and concentrated by orders of magnitude.

Abrasive water jet cutting technology is a great method for cutting glass because it allows for contours and shapes that cannot be achieved with other cutting machines at a reasonable cost. From artistic tabletop inlays to detailed stained glass designs, mirrors, replacement windows for and more, there is almost no glass cutting application that a waterjet cutting machine from Bear Glass waterjet can’t tackle.

Glass has a tendency to shatter, so it is very important that the initial holes are produced with a reduced pressure. Subsequently, the pressure must be increased to a cutting speed that is cost-effective. For glass, and other materials, which are crackable, you must gently raise and reduce the cutting pressure by means of proportional pressure control of the intensifier pump, otherwise, the material would be destroyed.

Water jet cutting machine does not vibrate the glass, there are no heat-affected zones, or leave behind rough edges, almost no secondary finishing is required. Reduce your cut-out processing time by 75% with waterjet!

Today, this technology is used for power point cutouts in glass splash-backs, holes for door hardware, balustrade panels, shower screens mirrors and tabletop inlays.

From a long time in quality, waterjet cutting is the best idea to cut a glass or mirror. We are one of the nation’s leading manufacturers of fabricated glass and mirror. Our experienced team works diligently with the latest machinery and cutting technology. We are equipped to handle the most intricate tasks.

From the water jet cutting process being applied to the glass and mirror, then as long as you can handle it. Water jet cutting machine can cut it:

Key Benefits of Glass with Waterjet Cutting

  • water jet cutting machine can cut complex patterns easily
  • Increased productivity, fast cutting, and high-quality parts
  • Save the raw materials — reduced scrap
  • Low operating price — waterjet abrasive focusing nozzles requires rare replacement
  • Single-pass cutting, depending on material thickness
  • Net or near-net cutting, little or no hand finishing
  • Reduced the tooling prices, lighter, flexible tooling

At Bear Glass, we are pride ourselves on staying up to date and keeping up with latest cutting technology. Water jet cutting machine is used both for the thin and thick glass to cut and detailed with a precise cutting stream. Be it glass tabletop, shower door, large glass wall blocks, or antique mirror waterjet can cut everything with perfection. So if you need to cut any type of glass and mirror with a custom shape and size, Contact us.

The post Cut It Out – With Our Water Jet Cutting Machine appeared first on Bear Glass Blog.

]]> Bear Glass V-Grooving https://bearglassblog.com/bear-glass-v-grooving/ Tue, 13 May 2014 13:01:37 +0000 http://bearglassblog.com/?p=1656 V-Grooving   Bear Glass is the 4th generation family business specializing in working in glass. We are the largest stocking distributor of Walker glass in the nation.  Bear Glass products, offer a wealth of opportunities to architects, interior designers and decorators.  Any pattern can be designed by engraving a groove in the surface of the glass.  Our V-Grooving equipment is capable of producing custom engraved designs (commonly know as V-Grooving), with different profile engraving tools. V-Grooving can be done on any architectural flat glass and mirrors.  Our V-Grooved glass can also be heat strengthened, tempered, and laminated.  Custom profiles are also available here at Bear Glass.  This is glass that has a groove or grooves put into it to create simple to complex designs for your liking.  Grooving can be used alone or even in combination with other design elements, such as silk screening, to create a myriad of patterns. While most glass groovers are looking for high volume orders, which we like too, we’re happy to work with you to fill your low volume needs.  Polished, unpolished, straight, patterned, silhouetted.  These are just some examples of what Bear Glass can accomplish for you with our v-grooving.  If you want to add depth and beauty to an otherwise plain panel of glass for your new door line, wall system, window line, etc., you have found the right place!  Bear Glass is a world leader in v-grooving capabilities and is completely self-sufficient for v-grooving glass panels for doors, windows, and architectural applications. Bear Glass is the largest capacity v-groove manufacturer in North America, and possibly the world.  We hold several U.S. patents in v-groove technologies, and with our ability to dress and shape our wheels in house, we are continually experimenting with new grooves and patterns.  Bear Glass V-grooved patterns split incoming light—almost like a prism—into a full spectrum of colors while exuding elegance and beauty. Polished, unpolished, straight, patterned, silhouetted.  These are just some examples of what Bear Glass can accomplish for you with our v-grooving.  If you want to add depth and beauty to an otherwise plain panel of glass for your new door line, wall system, window line, etc., you have found the right place!  V-Grooved glass can also be heat strengthened, tempered, and laminated.  Custom profiles are also available.  Grooving can be used alone or in combination with other design elements, such as silk screening, to create a myriad of extraordinary patterns.  Bear Glass‘ V-Grooving glass allows you to have a unique look to your windows and doors without having the traditional grids block your view. While most glass groovers are looking for high volume orders, which we like too, we’re happy to work with you to fill your low volume needs. For more information on our V-grooved Glass please contact Bear Glass at: Bear Glass New York Address: 399 20th Street Brooklyn, NY 11215 Phone: 718-832-3604 718-832-3604 Fax: 718-832-0786 E-mail: bearglass@yahoo.com Bear Glass New Jersey: Address: 359 Essex Road Tinton Falls New Jersey 07753 Phone: 732 901 2626 732 901 2626 Fax: 732 901 2266 E-mail: Sales@BearGlassNJ.com Call Send SMS Add to Skype You’ll need Skype Credit Free via Skype

The post Bear Glass V-Grooving appeared first on Bear Glass Blog.

]]>

V-Grooving

 

Bear Glass is the 4th generation family business specializing in working in glass. We are the largest stocking distributor of Walker glass in the nation.  Bear Glass products, offer a wealth of opportunities to architects, interior designers and decorators.  Any pattern can be designed by engraving a groove in the surface of the glass.  Our V-Grooving equipment is capable of producing custom engraved designs (commonly know as V-Grooving), with different profile engraving tools.

V-Grooving can be done on any architectural flat glass and mirrors.  Our V-Grooved glass can also be heat strengthened, tempered, and laminated.  Custom profiles are also available here at Bear Glass.  This is glass that has a groove or grooves put into it to create simple to complex designs for your liking.  Grooving can be used alone or even in combination with other design elements, such as silk screening, to create a myriad of patterns.

While most glass groovers are looking for high volume orders, which we like too, we’re happy to work with you to fill your low volume needs.  Polished, unpolished, straight, patterned, silhouetted.  These are just some examples of what Bear Glass can accomplish for you with our v-grooving.  If you want to add depth and beauty to an otherwise plain panel of glass for your new door line, wall system, window line, etc., you have found the right place!  Bear Glass is a world leader in v-grooving capabilities and is completely self-sufficient for v-grooving glass panels for doors, windows, and architectural applications.

Bear Glass is the largest capacity v-groove manufacturer in North America, and possibly the world.  We hold several U.S. patents in v-groove technologies, and with our ability to dress and shape our wheels in house, we are continually experimenting with new grooves and patterns.  Bear Glass V-grooved patterns split incoming light—almost like a prism—into a full spectrum of colors while exuding elegance and beauty.

Polished, unpolished, straight, patterned, silhouetted.  These are just some examples of what Bear Glass can accomplish for you with our v-grooving.  If you want to add depth and beauty to an otherwise plain panel of glass for your new door line, wall system, window line, etc., you have found the right place!  V-Grooved glass can also be heat strengthened, tempered, and laminated.  Custom profiles are also available.  Grooving can be used alone or in combination with other design elements, such as silk screening, to create a myriad of extraordinary patterns.  Bear Glass‘ V-Grooving glass allows you to have a unique look to your windows and doors without having the traditional grids block your view.

While most glass groovers are looking for high volume orders, which we like too, we’re happy to work with you to fill your low volume needs.

For more information on our V-grooved Glass please contact Bear Glass at:

Bear Glass New York

Address: 399 20th Street Brooklyn, NY 11215

Phone: 718-832-3604 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

Bear Glass New Jersey:

Address: 359 Essex Road Tinton Falls New Jersey 07753

Phone: 732 901 2626 732 901 2626

Fax: 732 901 2266

E-mail: Sales@BearGlassNJ.com

The post Bear Glass V-Grooving appeared first on Bear Glass Blog.

]]> Bear Glass adds two new distribution points! https://bearglassblog.com/bear-glass-adds-two-new-distribution-points/ Tue, 08 Apr 2014 17:06:22 +0000 http://bearglassblog.com/?p=2500 Bear Glass is excited to announce that in addition to our existing Brooklyn NY and Tinton Falls NJ factory’s we have now added two new location in upstate New York as distribution centers! Oneonta, NY 13820 Cobleskill, NY 13820 Bear Glass will now have four location with trucks on the road five days a week delivering to New York, New Jersey, Connecticut, and Pennsylvania. Bear Glass also offers our rent a glass truck program. Whether big or small pieces we guarantee professional quality service, as well as quick delivery.  We are willing to properly and securely package the glass. We have the proper equipment to package glass artwork, showcases, and aquariums. We have glass truck racks that can transport large mirror and glass pieces. We insure fast and timely delivery to your business, company, factory, apartment, or house. After delivery we are fully capable of installing and setting up the glass in requested location. We will even move other people’s glass. Bear Glass Does it all! There’s no order too big or too small, we want them all. When it comes to glass and mirror Bear Glass is proud to offer many products and services that our competitors don’t. Some of these products and services include: back painted glass, custom antique mirror, custom fish tanks, fire rated glass, laminated glass, mirrored furniture, mirror re-silvering, painted glass, patterned glass, sandblasting, tempered glass, two way mirror, wire glass, and v-grooving. Get more information on all Bear Glass has to offer by clicking  here Bear Glass can be contacted as follows: Bear Glass New York Address: 399 20th Street Brooklyn, NY 11215 Phone: 718-832-3604 Fax: 718-832-0786 E-mail: Sales@bearglass.com Bear Glass New Jersey Address: 359 Essex Road Tinton Falls New Jersey 07753 Phone: 732 901 262 Fax: 732 901 2266 Email: Sales@bearglassnj.com Call Send SMS Add to Skype You’ll need Skype Credit Free via Skype

The post Bear Glass adds two new distribution points! appeared first on Bear Glass Blog.

]]>

Bear Glass is excited to announce that in addition to our existing Brooklyn NY and Tinton Falls NJ factory’s we have now added two new location in upstate New York as distribution centers!

Oneonta, NY 13820

Cobleskill, NY 13820

Bear Glass will now have four location with trucks on the road five days a week delivering to New York, New Jersey, Connecticut, and Pennsylvania.

Bear Glass also offers our rent a glass truck program. Whether big or small pieces we guarantee professional quality service, as well as quick delivery.  We are willing to properly and securely package the glass. We have the proper equipment to package glass artwork, showcases, and aquariums. We have glass truck racks that can transport large mirror and glass pieces. We insure fast and timely delivery to your business, company, factory, apartment, or house. After delivery we are fully capable of installing and setting up the glass in requested location. We will even move other people’s glass.

Bear Glass Does it all! There’s no order too big or too small, we want them all. When it comes to glass and mirror Bear Glass is proud to offer many products and services that our competitors don’t. Some of these products and services include: back painted glass, custom antique mirror, custom fish tanks, fire rated glass, laminated glass, mirrored furniture, mirror re-silvering, painted glass, patterned glass, sandblasting, tempered glass, two way mirror, wire glass, and v-grooving.

Get more information on all Bear Glass has to offer by clicking  here

Bear Glass can be contacted as follows:

Bear Glass New York

Address: 399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: Sales@bearglass.com

Bear Glass New Jersey

Address: 359 Essex Road

Tinton Falls New Jersey 07753

Phone: 732 901 262

Fax: 732 901 2266

Email: Sales@bearglassnj.com

The post Bear Glass adds two new distribution points! appeared first on Bear Glass Blog.

]]> Common Mirror Resilvering Questions https://bearglassblog.com/common-mirror-resilvering-questions/ Tue, 18 Mar 2014 19:08:01 +0000 http://bearglassblog.com/?p=2408 Frequently asked Mirror Re-silvering questions Q: Is re-silvering needed? A: Sometimes mirrors appear to be dirty or streaked on the front surface. The silvering on the back has no problem. So clean the mirror surface properly to check that it has no damage on the front surface. Q: Is it possible to re-silver a small portion of the mirror? A: Yes, it is possible to re-silver a portion of your mirror to re-silver. Unfortunately, satisfactory results are not guaranteed and are not always achieved by doing so. If you want the best result a complete re-silvering of the mirror is recommended. Q: How long does Re-silvering last? A: The re-silvering should last for decades. However, we can’t control the conditions in which mirrors are hung or mounted. Bathroom mirrors or other mirrors subject to excessive moisture has higher chances of getting disturbed quicker than mirrors in the bed room or other places. Q: What is used to silver the surface of the mirror? A: In Earlier mirror making silver was used to coat the glass surface. But in more recent times sputtering powdered aluminum or other compounds have been used in the place of silver. Therefore today, this process is also known as aluminizing. Which makes this service more cost effective. Q: What if the edge of the m irror has Deterioration? A: This is very common, frequently occurring on bathroom mirrors where moisture has puddled on the edges. It might not have been installed or sealed properly in the first place. If the mirror is large simple rectangle without bevels it will be cheaper to buy a new mirror than to have it re-silvered. One solution for the problem is to cut off the damaged area and then remount the mirror. Bear Glass also provides mirror cutting services for any thickness. Q: Does Silver Paint touch up works as re-silvering? A: No, It doesn’t. Using paint for re-silvering a mirror will get disappointing results. Mirror re-silvering process does involve many steps and techniques that is not possible at home unless you have the proper knowledge. Get more information On all Bear Glass has to offer by clicking  here For a quote on glass or mirror please contact  Bear Glass at: Bear Glass New York Address: 399 20th Street Brooklyn, NY 11215 Phone: 718-832-3604 718-832-3604 Fax: 718-832-0786 E-mail: Sales@bearglass.com Bear Glass New Jersey Address: 359 Essex Road Tinton Falls New Jersey 07753 Phone: 732 901 262 Fax: 732 901 2266 Email: Sales@bearglassnj.com Call Send SMS Add to Skype You’ll need Skype Credit Free via Skype

The post Common Mirror Resilvering Questions appeared first on Bear Glass Blog.

]]>

Frequently asked Mirror Re-silvering questions

Q: Is re-silvering needed?

A: Sometimes mirrors appear to be dirty or streaked on the front surface. The silvering on the back has no problem. So clean the mirror surface properly to check that it has no damage on the front surface.

Q: Is it possible to re-silver a small portion of the mirror?

A: Yes, it is possible to re-silver a portion of your mirror to re-silver. Unfortunately, satisfactory results are not guaranteed and are not always achieved by doing so. If you want the best result a complete re-silvering of the mirror is recommended.

Q: How long does Re-silvering last?

A: The re-silvering should last for decades. However, we can’t control the conditions in which mirrors are hung or mounted. Bathroom mirrors or other mirrors subject to excessive moisture has higher chances of getting disturbed quicker than mirrors in the bed room or other places.

Q: What is used to silver the surface of the mirror?

A: In Earlier mirror making silver was used to coat the glass surface. But in more recent times sputtering powdered aluminum or other compounds have been used in the place of silver. Therefore today, this process is also known as aluminizing. Which makes this service more cost effective.

Q: What if the edge of the m irror has Deterioration?

A: This is very common, frequently occurring on bathroom mirrors where moisture has puddled on the edges. It might not have been installed or sealed properly in the first place. If the mirror is large simple rectangle without bevels it will be cheaper to buy a new mirror than to have it re-silvered. One solution for the problem is to cut off the damaged area and then remount the mirror. Bear Glass also provides mirror cutting services for any thickness.

Q: Does Silver Paint touch up works as re-silvering?

A: No, It doesn’t. Using paint for re-silvering a mirror will get disappointing results. Mirror re-silvering process does involve many steps and techniques that is not possible at home unless you have the proper knowledge.

Get more information On all Bear Glass has to offer by clicking  here

For a quote on glass or mirror please contact  Bear Glass at:

Bear Glass New York

Address: 399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604 718-832-3604

Fax: 718-832-0786

E-mail: Sales@bearglass.com

Bear Glass New Jersey

Address: 359 Essex Road

Tinton Falls New Jersey 07753

Phone: 732 901 262

Fax: 732 901 2266

Email: Sales@bearglassnj.com

The post Common Mirror Resilvering Questions appeared first on Bear Glass Blog.

]]> Bear Glass Has Super Grey Glass https://bearglassblog.com/bear-glass-has-grey-glass/ Tue, 11 Mar 2014 16:27:06 +0000 http://bearglassblog.com/?p=2480 Lately our customers have been asking us if we have grey glass in stock. And the answer is YES! Pilkington super grey glass combines stunning exterior aesthetics and unsurpassed interior glare control with the best solar control performance of any tinted float glass in the industry. On the outside, low-reflective super grey glass tinted Float Glass offers a dramatic, deep cool-grey appearance that increases visual privacy and dramatically reduces read-through from interior shading devices. Inside, it softens bright daylight and reduces glare, making it perfect for applications near computers and video display screens. Product features & benefits include: An uncoated float glass that provides the performance of a reflective glass. Enhanced visual privacy and reduced read-through from interior shading devices. Best solar control of any uncoated glass, super grey glass provides the lowest shading coefficient of any float glass and a better shading coefficient than many reflective glass products. This means super grey glass can help enhance interior comfort and reduce cooling loads. Unsurpassed light and glare control improves visual privacy and reduces the need for blinds or shades. Super grey glass softens bright daylight and helps eliminate glare, making it the perfect “user-friendly” glass. Low interior and exterior reflectance reduces interior glare and minimizes exterior daylight reflectance. Super grey glass is ideal where architectural designs or restrictions prohibit structures with high reflectance. Ideal for Skylight applications requiring solar control with very low interior reflection, especially at night. Distinctive aesthetics inside and out. Super grey glass offers a deep, cool-grey tint from the exterior, while providing a remarkably crisp, comfortable view from the interior. Super grey glass also provides color-neutral visibility from the inside, resulting in an undistorted, natural view Uniform, no-read through look between spandrel and vision glass areas. The uniform appearance of super grey glass may eliminate the need for an opacifier in the spandrel glass. Low UV  transmittance that significantly outperforms other tinted and coated glass products. 6mm super grey glass blocks 99% of the sun’s damaging UV rays. Excellent Availability,   super grey glass can be inventoried for short lead times and improved control of project costs. For more Information on all Bear Glass has to offer Please Contact Us at: Bear Glass New York Address: 399 20th Street Brooklyn, NY 11215 Phone: 718-832-3604 Fax: 718-832-0786 Email: Sales@bearglass.com Bear Glass New Jersey Address: 359 Essex Road Tinton Falls New Jersey 07753 Phone: 732 901 2626 Fax: 732 901 2266 Email: Sales@BearGlassNJ.com Call Send SMS Add to Skype You’ll need Skype Credit Free via Skype

The post Bear Glass Has Super Grey Glass appeared first on Bear Glass Blog.

]]>

Lately our customers have been asking us if we have grey glass in stock. And the answer is YES! Pilkington super grey glass combines stunning exterior aesthetics and unsurpassed interior glare control with the best solar control performance of any tinted float glass in the industry. On the outside, low-reflective super grey glass tinted Float Glass offers a dramatic, deep cool-grey appearance that increases visual privacy and dramatically reduces read-through from interior shading devices. Inside, it softens bright daylight and reduces glare, making it perfect for applications near computers and video display screens.

Product features & benefits include:

  • An uncoated float glass that provides the performance of a reflective glass.
  • Enhanced visual privacy and reduced read-through from interior shading devices.
  • Best solar control of any uncoated glass, super grey glass provides the lowest shading coefficient of any float glass and a better shading coefficient than many reflective glass products. This means super grey glass can help enhance interior comfort and reduce cooling loads.
  • Unsurpassed light and glare control improves visual privacy and reduces the need for blinds or shades. Super grey glass softens bright daylight and helps eliminate glare, making it the perfect “user-friendly” glass.
  • Low interior and exterior reflectance reduces interior glare and minimizes exterior daylight reflectance. Super grey glass is ideal where architectural designs or restrictions prohibit structures with high reflectance.
  • Ideal for Skylight applications requiring solar control with very low interior reflection, especially at night.
  • Distinctive aesthetics inside and out. Super grey glass offers a deep, cool-grey tint from the exterior, while providing a remarkably crisp, comfortable view from the interior. Super grey glass also provides color-neutral visibility from the inside, resulting in an undistorted, natural view
  • Uniform, no-read through look between spandrel and vision glass areas. The uniform appearance of super grey glass may eliminate the need for an opacifier in the spandrel glass.
  • Low UV  transmittance that significantly outperforms other tinted and coated glass products. 6mm super grey glass blocks 99% of the sun’s damaging UV rays.
  • Excellent Availability,   super grey glass can be inventoried for short lead times and improved control of project costs.

For more Information on all Bear Glass has to offer Please Contact Us at:

Bear Glass New York

Address:

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

Email: Sales@bearglass.com

Bear Glass New Jersey

Address:

359 Essex Road

Tinton Falls New Jersey 07753

Phone: 732 901 2626

Fax: 732 901 2266

Email: Sales@BearGlassNJ.com

The post Bear Glass Has Super Grey Glass appeared first on Bear Glass Blog.

]]> Bear Glass Does Water Jet Glass Cutting https://bearglassblog.com/bear-glass-does-water-jet-glass-cutting/ Tue, 19 Feb 2013 17:04:13 +0000 http://bearglassblog.com/?p=1232 At Bear Glass we pride ourselves on staying up to date and keeping up with latest cutting edge technology. That being said, Bear Glass is excited to introduce our new water jet technology! From i ntricate glass shapes to mirrors, glass ornaments, and more, there’s almost no glass cutting application that a water jet glass cutting system can’t tackle. Both thin and thick glass materials can be cut and detailed with a precise cutting stream. And because water jet cutting does not vibrate the glass, produce heat-affected zones, or leave behind rough edges, almost no secondary finishing is required. In addition, water jet cutting’s ability to generate exact, clean cuts with speed make it an efficient cutting process for the majority of glass cutting applications. Why Water Jet Cutting?   Bear Glass uses a Pure Water Jet Cutting Machine manufactured by Perfect Technology Center. The Water jet system is an ideal machine for the cutting of various materials and is extremely versatile compared to alternative machinery such as lasers and plasmas. Water jet cutting is performed with “pure water” for the cutting of – foam, package products, gaskets, gibson board, carpet, food, rubber, and many other soft materials.  The power of this pure water jet is so strong it has the ability to cut  – steel, copper, aluminum, granite, marble, and even laminated glass. The Waterjet cutting process does not generate heat; eliminating the warping of materials like copper and aluminum. Based on the media to be cut, Bear Glass is proud to say that we offer PTC water jets that offer cutting systems with cut speeds that will exceed 4000 inches per minute. This speed is triple other water jet manufacturers capability due to the PTC state of the art Linear Drive motion system.   For more information on Bear Glass and our new PTC water jet technology  please contact Bear Glass at: FACTORY/ OFFICE Address: Bear Glass Inc. 399 20th Street Brooklyn, NY 11215 Phone: 718-832-3604 Fax: 718-832-0786 E-mail: bearglass@yahoo.com If you are in New Jersey: Bear Glass New Jersey 359 Essex Road Tinton Falls New Jersey  07753 P: 732 901 2626 F: 732 901 2266 E: Sales@BearGlassNJ.com

The post Bear Glass Does Water Jet Glass Cutting appeared first on Bear Glass Blog.

]]>

At Bear Glass we pride ourselves on staying up to date and keeping up with latest cutting edge technology. That being said, Bear Glass is excited to introduce our new water jet technology! From i ntricate glass shapes to mirrors, glass ornaments, and more, there’s almost no glass cutting application that a water jet glass cutting system can’t tackle. Both thin and thick glass materials can be cut and detailed with a precise cutting stream. And because water jet cutting does not vibrate the glass, produce heat-affected zones, or leave behind rough edges, almost no secondary finishing is required. In addition, water jet cutting’s ability to generate exact, clean cuts with speed make it an efficient cutting process for the majority of glass cutting applications.

Why Water Jet Cutting?

 

CLICK THE PICTURE FOR OUR NEW BEAR GLASS WATER JET VIDEO!
Dreamwalls_Waterjet_Bear – MobileDreamwalls_Waterjet_Bear – Mobile

Bear Glass uses a Pure Water Jet Cutting Machine manufactured by Perfect Technology Center. The Water jet system is an ideal machine for the cutting of various materials and is extremely versatile compared to alternative machinery such as lasers and plasmas. Water jet cutting is performed with “pure water” for the cutting of – foam, package products, gaskets, gibson board, carpet, food, rubber, and many other soft materials.  The power of this pure water jet is so strong it has the ability to cut  – steel, copper, aluminum, granite, marble, and even laminated glass. The Waterjet cutting process does not generate heat; eliminating the warping of materials like copper and aluminum. Based on the media to be cut, Bear Glass is proud to say that we offer PTC water jets that offer cutting systems with cut speeds that will exceed 4000 inches per minute. This speed is triple other water jet manufacturers capability due to the PTC state of the art Linear Drive motion system.

Do Not Limit Your Possibilities! Break Through The Glass Ceiling And Call Bear Glass Today!

 

For more information on Bear Glass and our new PTC water jet technology  please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

If you are in New Jersey:

Bear Glass New Jersey

359 Essex Road

Tinton Falls New Jersey  07753

P: 732 901 2626

F: 732 901 2266

E: Sales@BearGlassNJ.com

The post Bear Glass Does Water Jet Glass Cutting appeared first on Bear Glass Blog.

]]>