Abrasive waterjet cutting technology is a great method for cutting glass because it allows for contours and shapes that cannot be achieved with other cutting machines at a reasonable cost. From artistic tabletop inlays to detailed stained glass designs, mirrors, glass ornaments, replacement windows for antique cars, and more, there’s almost no glass cutting application that a waterjet cutting machine can’t tackle.

Glass has a tendency to crack, so it is very important that the initial holes are produced with a reduced pressure . Subsequently, the pressure must be increased to a cutting speed that is cost-effective. For glass, ceramics and other brittle materials, you must gradually increase and reduce the cutting pressure by means of proportional pressure control of the intensifier pump, otherwise, the material would be destroyed.

As an alternative waterjet technology can be used as an abrasive because it is softer, which reduces the potential for chipping, cracking and other surface blemishes and leaves a cut edge that is polished to a smooth finish.Because waterjet cutting does not vibrate the glass, there are no heat-affected zones to leave behind rough edges, almost no secondary finishing is required.

ADVANTAGES OF CUTTING GLASS WITH WATERJET

• Cut glass geometry that common machining cannot perform
• Delicate glass does not crack during processing
• Precisely cut thin to thick glass without changing any tooling
• Eliminates pressure of cutting process on surface material
• No heat affected zone
• No tool to sharpen
• No need for reworking of the cut edge
• No waste of material, narrow cutting gap
• Cost effective means of cutting holes in glass
• Create intricate design in any shape and size

Everyday Uses of waterjet cutting

• Tabletop
• Stained glass
• Light fixtures
• Frameless shower screens
• Bullet-proof glass
• Mirrors
• Kitchen and bathroom splash backs
• Laminated glass
• Window panels
• Optical laser parts
• Replacement glass for antique autos
• Glass ornaments

When you need reliable waterjet cutting solutions, Bear Glass has you covered. We can get you the best cutting solutions for glass items of your choice.

With over two decades of expertise in quality waterjet cutting, we are one of the nation’s leading manufacturers of fabricated glass parts. Our experienced team works diligently with the latest machinery and cutting technology.  We are equipped to handle the most intricate tasks.

No matter what the shape, size or material, if you can imagine it, we can do it.  Our use of equipment provides us the opportunity to deliver high. Our latest waterjet capabilities create the highest accuracy for the smallest details.

Bear Glass will work side-by-side with you every step of the way. Whether you are an architect or furniture maker, you can count on us to go the extra mile for your fabrication project. Whether you have low-volume or high-volume specifications, Bear Glass has production capabilities to meet your unique needs. We can produce depending on the size requirements.

If you are ready to jump start your next great project, contact Bear Glass today. Our knowledgeable staff can answer any questions that you may have. To get connected, feel free to write on sales@bearglass.com

The post Glass Cutting using Waterjet cutting solutions by Bear Glass appeared first on Bear Glass Blog.

At Bear Glass we pride ourselves on staying up to date and keeping up with latest cutting edge technology. That being said, Bear Glass is excited to introduce our new water jet technology! From i ntricate glass shapes to mirrors, glass ornaments, and more, there’s almost no glass cutting application that a water jet glass cutting system can’t tackle. Both thin and thick glass materials can be cut and detailed with a precise cutting stream. And because water jet cutting does not vibrate the glass, produce heat-affected zones, or leave behind rough edges, almost no secondary finishing is required. In addition, water jet cutting’s ability to generate exact, clean cuts with speed make it an efficient cutting process for the majority of glass cutting applications.

Why Water Jet Cutting?

Bear Glass uses a Pure Water Jet Cutting Machine manufactured by Perfect Technology Center. The Water jet system is an ideal machine for the cutting of various materials and is extremely versatile compared to alternative machinery such as lasers and plasmas. Water jet cutting is performed with “pure water” for the cutting of – foam, package products, gaskets, gibson board, carpet, food, rubber, and many other soft materials.  The power of this pure water jet is so strong it has the ability to cut  – steel, copper, aluminum, granite, marble, and even laminated glass. The Waterjet cutting process does not generate heat; eliminating the warping of materials like copper and aluminum. Based on the media to be cut, Bear Glass is proud to say that we offer PTC water jets that offer cutting systems with cut speeds that will exceed 4000 inches per minute. This speed is triple other water jet manufacturers capability due to the PTC state of the art Linear Drive motion system.

For more information on Bear Glass and our new PTC water jet technology  please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

If you are in New Jersey:

Bear Glass New Jersey

359 Essex Road

Tinton Falls New Jersey  07753

P: 732 901 2626

F: 732 901 2266

E: Sales@BearGlassNJ.com

The post Bear Glass Does Water Jet Glass Cutting appeared first on Bear Glass Blog.