Bear Glass Is A Premier Walker Distributor.  We are better able to serve our customers with 2 facilities located in both Brooklyn NY and Tinton Falls NJ.  Our Motto is “ We Do Everything In Glass And Mirror”, so we are able to service any and all your glass and mirror needs.

How to Select the Right Acid-Etched Glass

While the glass etching process is generally the same, variations in the chemistry and other process parameters will create different glass surfaces with varied visual and performance characteristics

• Light diffusion
• Privacy
• Glare reduction
• Dimensional effect
• Visual appearance
• Integration with surrounding objects
• Light transmission
• Energy efficiency

An etched surface with rugged peeks and deep valleys absorb and diffuses light, rather than transmit or reflect it, resulting in a rich white opaque appearance.  On the other hand, an etched surface with smooth rounded bumps enhances light transmission and creates a more transparent glass, characterized by reduced reflective glare and a soft translucent appearance.

The type of acid-etch surface finish selected will render a different level of opacity and smoothness as well as create varied visual effects.  It will also have an impact on the following performance ratios:

–          Gloss

–          Visible light transmission

–          Visible light reflectance

–          Shading coefficient

–          Solar direct transmission

–          Solar direct reflectance

–          U-Value

Also, bare in mind that the type of glass substrate used will impact on the above-mentioned characteristics. For example, acid-etched glass made out of low-iron glass (e.g. Starphire ultra-clear glass by PPG) will create a translucent satin appearance without the “greening effect” of ordinary clear glass.  Similarly, acid-etched blue glass made out of PPG’s blue Pacifica will create a different visual effect than one made with Pilkington’s Artic Blue.

Consequently, both the acid-etch finish and the glass substrate used will impact on the color appearance, level of opacity and performance ratios of the acid-etched glass.

In order to enhance certain characteristics of the acid-etched glass, you may also consider etching the glass on both sides.  This is a good approach for applications requiring a higher level of opacity or a similar finish and visual effect on both sides of the glass panel (e.g. partitions).

The use of acid-etched glass for exterior applications may also be appropriate.  Because acid-etching is not a coating, its resistance properties in exterior conditions are essentially equivalent to un-etched glass.  However, it is important to point out that an etched surface with rugged peeks and deep valleys could lead to higher maintenance costs because dirt particles may be more difficult to remove.  Therefore, the use of an etched surface with a lighter finish (smooth rounded bumps) is recommended in exterior applications.

As you can see, being specific about the nature of the acid-etched glass product required is very important.  Do not hesitate to share your design and performance intent to our glass professionals to ensure the acid-etched glass product selected meets your goals and objectives.

For more information on How to Select the Right Acid-Etched Glass please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

217-44 98th Ave., Queens Village, NY – 11429
United States
 +1 (718) 832-3604
 sales@bearglass.com

If you are in New Jersey:

Bear Glass New Jersey

359 Essex Road

Tinton Falls New Jersey  07753

Phone: 732 901 2626

Fax: 732 901 2266

Email: Sales@BearGlassNJ.com

The post Bear Glass Can show You How To Select The Right Acid-Etched Glass appeared first on Bear Glass Blog.

V-Grooving

Bear Glass is the 4th generation family business specializing in working in glass. We are the largest stocking distributor of Walker glass in the nation.  Bear Glass products, offer a wealth of opportunities to architects, interior designers and decorators.  Any pattern can be designed by engraving a groove in the surface of the glass.  Our V-Grooving equipment is capable of producing custom engraved designs (commonly know as V-Grooving), with different profile engraving tools.

V-Grooving can be done on any architectural flat glass and mirrors.  Our V-Grooved glass can also be heat strengthened, tempered, and laminated.  Custom profiles are also available here at Bear Glass.  This is glass that has a groove or grooves put into it to create simple to complex designs for your liking.  Grooving can be used alone or even in combination with other design elements, such as silk screening, to create a myriad of patterns.

While most glass groovers are looking for high volume orders, which we like too, we’re happy to work with you to fill your low volume needs.  Polished, unpolished, straight, patterned, silhouetted.  These are just some examples of what Bear Glass can accomplish for you with our v-grooving.  If you want to add depth and beauty to an otherwise plain panel of glass for your new door line, wall system, window line, etc., you have found the right place!  Bear Glass is a world leader in v-grooving capabilities and is completely self-sufficient for v-grooving glass panels for doors, windows, and architectural applications.

Bear Glass is the largest capacity v-groove manufacturer in North America, and possibly the world.  We hold several U.S. patents in v-groove technologies, and with our ability to dress and shape our wheels in house, we are continually experimenting with new grooves and patterns.  Bear Glass V-grooved patterns split incoming light—almost like a prism—into a full spectrum of colors while exuding elegance and beauty.

Polished, unpolished, straight, patterned, silhouetted.  These are just some examples of what Bear Glass can accomplish for you with our v-grooving.  If you want to add depth and beauty to an otherwise plain panel of glass for your new door line, wall system, window line, etc., you have found the right place!  V-Grooved glass can also be heat strengthened, tempered, and laminated.  Custom profiles are also available.  Grooving can be used alone or in combination with other design elements, such as silk screening, to create a myriad of extraordinary patterns.  Bear Glass‘ V-Grooving glass allows you to have a unique look to your windows and doors without having the traditional grids block your view.

While most glass groovers are looking for high volume orders, which we like too, we’re happy to work with you to fill your low volume needs.

For more information on our V-grooved Glass please contact Bear Glass at:

Bear Glass New York

Address: 399 20th Street Brooklyn, NY 11215

Phone: 718-832-3604 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

Bear Glass New Jersey:

Address: 359 Essex Road Tinton Falls New Jersey 07753

Phone: 732 901 2626 732 901 2626

Fax: 732 901 2266

E-mail: Sales@BearGlassNJ.com

The post Bear Glass V-Grooving appeared first on Bear Glass Blog.

Bear Glass is excited to announce that in addition to our existing Brooklyn NY and Tinton Falls NJ factory’s we have now added two new location in upstate New York as distribution centers!

Oneonta, NY 13820

Cobleskill, NY 13820

Bear Glass will now have four location with trucks on the road five days a week delivering to New York, New Jersey, Connecticut, and Pennsylvania.

Bear Glass also offers our rent a glass truck program. Whether big or small pieces we guarantee professional quality service, as well as quick delivery.  We are willing to properly and securely package the glass. We have the proper equipment to package glass artwork, showcases, and aquariums. We have glass truck racks that can transport large mirror and glass pieces. We insure fast and timely delivery to your business, company, factory, apartment, or house. After delivery we are fully capable of installing and setting up the glass in requested location. We will even move other people’s glass.

Bear Glass Does it all! There’s no order too big or too small, we want them all. When it comes to glass and mirror Bear Glass is proud to offer many products and services that our competitors don’t. Some of these products and services include: back painted glass, custom antique mirror, custom fish tanks, fire rated glass, laminated glass, mirrored furniture, mirror re-silvering, painted glass, patterned glass, sandblasting, tempered glass, two way mirror, wire glass, and v-grooving.

Get more information on all Bear Glass has to offer by clicking  here

Bear Glass can be contacted as follows:

Bear Glass New York

Address: 399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: Sales@bearglass.com

Bear Glass New Jersey

Address: 359 Essex Road

Tinton Falls New Jersey 07753

Phone: 732 901 262

Fax: 732 901 2266

Email: Sales@bearglassnj.com

The post Bear Glass adds two new distribution points! appeared first on Bear Glass Blog.

Frequently asked Mirror Re-silvering questions

Q: Is re-silvering needed?

A: Sometimes mirrors appear to be dirty or streaked on the front surface. The silvering on the back has no problem. So clean the mirror surface properly to check that it has no damage on the front surface.

Q: Is it possible to re-silver a small portion of the mirror?

A: Yes, it is possible to re-silver a portion of your mirror to re-silver. Unfortunately, satisfactory results are not guaranteed and are not always achieved by doing so. If you want the best result a complete re-silvering of the mirror is recommended.

Q: How long does Re-silvering last?

A: The re-silvering should last for decades. However, we can’t control the conditions in which mirrors are hung or mounted. Bathroom mirrors or other mirrors subject to excessive moisture has higher chances of getting disturbed quicker than mirrors in the bed room or other places.

Q: What is used to silver the surface of the mirror?

A: In Earlier mirror making silver was used to coat the glass surface. But in more recent times sputtering powdered aluminum or other compounds have been used in the place of silver. Therefore today, this process is also known as aluminizing. Which makes this service more cost effective.

Q: What if the edge of the m irror has Deterioration?

A: This is very common, frequently occurring on bathroom mirrors where moisture has puddled on the edges. It might not have been installed or sealed properly in the first place. If the mirror is large simple rectangle without bevels it will be cheaper to buy a new mirror than to have it re-silvered. One solution for the problem is to cut off the damaged area and then remount the mirror. Bear Glass also provides mirror cutting services for any thickness.

Q: Does Silver Paint touch up works as re-silvering?

A: No, It doesn’t. Using paint for re-silvering a mirror will get disappointing results. Mirror re-silvering process does involve many steps and techniques that is not possible at home unless you have the proper knowledge.

Get more information On all Bear Glass has to offer by clicking  here

For a quote on glass or mirror please contact  Bear Glass at:

Bear Glass New York

Address: 399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604 718-832-3604

Fax: 718-832-0786

E-mail: Sales@bearglass.com

Bear Glass New Jersey

Address: 359 Essex Road

Tinton Falls New Jersey 07753

Phone: 732 901 262

Fax: 732 901 2266

Email: Sales@bearglassnj.com

The post Common Mirror Resilvering Questions appeared first on Bear Glass Blog.

Lately our customers have been asking us if we have grey glass in stock. And the answer is YES! Pilkington super grey glass combines stunning exterior aesthetics and unsurpassed interior glare control with the best solar control performance of any tinted float glass in the industry. On the outside, low-reflective super grey glass tinted Float Glass offers a dramatic, deep cool-grey appearance that increases visual privacy and dramatically reduces read-through from interior shading devices. Inside, it softens bright daylight and reduces glare, making it perfect for applications near computers and video display screens.

Product features & benefits include:

• An uncoated float glass that provides the performance of a reflective glass.

• Enhanced visual privacy and reduced read-through from interior shading devices.

• Best solar control of any uncoated glass, super grey glass provides the lowest shading coefficient of any float glass and a better shading coefficient than many reflective glass products. This means super grey glass can help enhance interior comfort and reduce cooling loads.

• Unsurpassed light and glare control improves visual privacy and reduces the need for blinds or shades. Super grey glass softens bright daylight and helps eliminate glare, making it the perfect “user-friendly” glass.

• Low interior and exterior reflectance reduces interior glare and minimizes exterior daylight reflectance. Super grey glass is ideal where architectural designs or restrictions prohibit structures with high reflectance.

• Ideal for Skylight applications requiring solar control with very low interior reflection, especially at night.

• Distinctive aesthetics inside and out. Super grey glass offers a deep, cool-grey tint from the exterior, while providing a remarkably crisp, comfortable view from the interior. Super grey glass also provides color-neutral visibility from the inside, resulting in an undistorted, natural view

• Uniform, no-read through look between spandrel and vision glass areas. The uniform appearance of super grey glass may eliminate the need for an opacifier in the spandrel glass.

• Low UV  transmittance that significantly outperforms other tinted and coated glass products. 6mm super grey glass blocks 99% of the sun’s damaging UV rays.

• Excellent Availability,   super grey glass can be inventoried for short lead times and improved control of project costs.

For more Information on all Bear Glass has to offer Please Contact Us at:

Bear Glass New York

Address:

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

Email: Sales@bearglass.com

Bear Glass New Jersey

Address:

359 Essex Road

Tinton Falls New Jersey 07753

Phone: 732 901 2626

Fax: 732 901 2266

Email: Sales@BearGlassNJ.com

The post Bear Glass Has Super Grey Glass appeared first on Bear Glass Blog.

Bear Glass Is A Premier Walker Distributor.  We are better able to serve our customers with 2 facilities located in both Brooklyn NY and Tinton Falls NJ.  Our Motto is “ We Do Everything In Glass And Mirror”, so we are able to service any and all your glass and mirror needs.

Double Sided Acid-Etched Glass

Etching two faces of the glass provides many applications which can be used as much for residential as for commercial uses.

Some of the more common applications include:

–         Office enclosures

–         Interior Doors

–         Railings

–         Shelving

–         Furniture components

–         Interior partitions

–         Sealed units

–         And many more

Double sided acid-etched glass also has many advantages, such as:

–          It offers more opacity than one sided acid-etching, perfect for those looking for enhanced privacy or to use as spandrels in a building facade.

–          It provides a consistent finish on both sides                          

–          Glare is reduced on both sides of the glass

–         It offers flexibility with varied visual effects from different finishes: Opaque/Opaque, Velour/Velour and Satin/Satin

–         And finally, it offers the unique possibility of combining full surface etching on one side with an acid-etched pattern on the other

Going with the inspiration of the last advantage mentioned above, Bear Glass has come a long way from its first launch of  Walker  Nuance patterns in 2008.  In June 2012, Bear Glass was proud to announce the launch of six new patterns by Walker Glass , two of which featured double sided acid-etched glass, namely patterns 511 and 512.

Having a pattern on both sides of the glass is a brand new feature of the product line and provides a good cross section of  Nuance capabilities. This trait gives the impression the glass has greater depth.

Also available are custom designs, on either one face or two.  As an example, Bear Glass ran a prototype of a pattern etched on both sides which gives a sort of criss-cross effect.

This is very interesting in terms of the possibilities architects and designers will be able to create. The addition of this new feature, double sided acid-etched patterns, will stimulate the imagination of architects and designers and help them come up with custom patterns meeting their own design intent.

For more information on Double Sided Acid-Etched Glass please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

If you are in New Jersey:

Bear Glass New Jersey

359 Essex Road

Tinton Falls New Jersey  07753

P: 732 901 2626

F: 732 901 2266

E: Sales@BearGlassNJ.com

The post Bear Glass Double Sided Acid-Etched Glass appeared first on Bear Glass Blog.

Bear Glass Is A Premier Walker Distributor. We are better able to serve our customers with 2 facilities located in both Brooklyn NY and Tinton Falls NJ. Our Motto is ” We Do Everything In Glass And Mirror” so we are able to service any and all your glass and mirror needs.

Bear Glass NJ Acid Etched Glass is becoming trendy in design and construction.  The consistency and durability of the finish can reduce glare and reflection, add privacy, increase light transmission, and provide texture.  It is important to select the right acid-etched glass for an application, and avoid making issues during storage and fabrication.  Although the glass-etching process is generally consistent, variations in chemistry and other parameters create different surfaces with distinct visual and performance characteristics.  Glass is etched with an aqueous solution of hydrofluoric acid, which attacks the silica and roughens the glass surface.  Generally, the more ‘white’ or opaque the finish, the more rough and porous the surface is.  When choosing distinctive and unique types of glass, architects and designers often have specific objectives in mind.  With acid-etched glass, these goals can relate to light diffusion, light transmission, privacy, visual appearance, integration with surrounding objects, and energy efficiency through increased day lighting.  An etched surface with rugged peaks and deep valleys absorbs and diffuses light, rather than transmitting or reflecting it- the result is a rich, white, opaque appearance.  In contrast, an etched surface with smooth, rounded bumps enhances light transmission and creates a more transparent glass, characterized by reduced reflective glare and a soft translucent appearance.

Acid-etched Surface Finish

Acid-etched finished vary by manufacturer.  The type selected for a glass substrate renders a different level of opacity and smoothness and creates varied visual effects.  It also impacts performance ratios such as gloss, visible light transmission (VLT), visible light reflectance, shading coefficient, solar direct transmission, solar direct reflectance, and U-value.  The visual effect of the acid-etch finish on mirror varies depending on the extent of etching performed.  A lighter-etched mirror has more reflection whereas a deeper etch creates a matte finish and more depth in the glass.

Glass Substrate

The substrate also influences the color appearance, level of opacity, and performance ratios of acid-etched glass.  Many falsely believe pieces of ultra-clear glass look the same, irrespective of their origin; similarly, glass with a blue tint from manufacturer ABC is often incorrectly perceived to match the one produced by manufacturer XYZ.  Generally, the glass business markets different shades of glass in ultra-clear, green, blue, or black.  In addition, some glass floaters can make varying shades of one color.  For example, acid-etched products manufactured from low-iron glass have a translucent satin appearance without the ‘greening effect’ of ordinary clear glass.  Similarly, a piece of acid-etched glass made with a dark blue hue from one supplier creates a different visual effect than one made with light blue from the same manufacturer.  Consequently, the shade of the acid-etched glass or mirror likely varies among manufacturers, depending on the substrate used.  It is important to remember the acid-etched finish itself creates a different color appearance, with different tints having varying performance ratios.

Etching on both sides

Etching glass on both sides can enhance its characteristics.  This approach is suitable for applications requiring a higher level of opacity or a similar finish and visual effect on both sides of the glass panel (e.g. partitions).  Most glass is produced by the float process.  The raw materials- mainly silica sand, soda ash, and limestone- are melted in a furnace and then flowed onto a bath of molten tin.  The glass then takes form and gradually cools as it moves from the tin bath to a controlled cooling chamber.  Float glass is best etched on the ‘air’ or ‘atmosphere’ side of the sheet, due to the greater likelihood of impurities and surface imperfections on the ‘tin’ side.  Production of acid-etched mirrors and two-sided etched glass requires etching of the tin side, posing an increased risk of defects in the surface if inappropriately done.   When considering double-sided acid-etched glass or acid-etched mirror, the type of finish specified impacts quality.  The manufacturer of the acid-etched product can recommend the finish (if any) suitable for the application.

Exterior applications

Bear Glass New Jersey Acid Etched Glass may be appropriate for exterior applications, such as insulated glazing (IG) units, skylights, and balustrades.  As acid-etching is not a coating, its resistance properties in outside conditions are essentially equivalent to non-etched glass.  However, it is important to note an etched surface with rugged peaks and deep valleys could lead to higher maintenance costs because dirt particles may be harder to remove.  Therefore, the use on an etched surface with a lighter finish (i.e. smooth, rounded bumps) is recommended in exterior applications.  In these situations, the level and type of maintenance required is similar to that of non-etched glass.

Storage and Fabrication

If proper care is taken during storage and fabrication, acid-etched glass or mirror can be kept clean as easily as non-etched products.  Whether the glass is tempered, laminated, insulated, painted, or even bent, fabricators can preserve the quality of the final product.  However, the general suggestions for keeping acid-etched glass or mirror stain-free during storage and fabrication may not be suitable in all situations.  Fabricators should follow guidelines issued by the manufacturer of a particular product to prevent or fix any marks or stains that occur.

Storage

Proper storage practices can help avoid marking on acid-etched glass and mirror.  Storage spaces must be dry and adequately ventilated.  Sheets should not be stored in areas of high humidity or heat (e.g. places near steam or water pipes).  Spaces exposed to chemical fumes should also be avoided.  All these conditions promote staining.  Conversely, sheets should not be stored outdoors or in unheated areas.

Fabrication

Due to the particular characteristics of more rugged glass surfaces, extra care should be taken during their fabrication to minimize the likelihood of embedding grease or dirt into the surface.  Gloves must always be used when working with sheets.  When handling sheets using equipment with suction cups, the clean and dust-free cups should be applied to the flat, untreated side.  If this is impossible, care should be taken to ensure proper vacuum is achieved (i.e. testing must be done to be certain the cups ‘stick’ to the glass to handle to weight).  When edging glass, these practices should be followed:

1. The edging machine conveyors should be clean and free of grease and buildup of glass grindings or cerium oxide.
2. The conveyor must be regularly opened and the machine interior washed (particularly the brushes) using soapy water.
3. The front and back conveyor pads should be routinely brushed, until all traces of cerium oxide and glass grindings are removed.
4. The front and back conveyors must be synchronized at identical speeds.
5. Only coolants specifically recommended for glass grinding and that adhere closely to the manufacturer’s recommended dilution ration should be used.
6. Manufacturer guidelines for concentration levels must be followed when using cerium oxide, with care taken to never add more than the minimal amount necessary for good polishing.
7. Glass should be washed immediately after polishing.  Washer brushers with .36-mm (0.014-in) diameter nylon bristles offer the best results.  The glass washer should be equipped with one pair of upper and lower brushes for every 0.6m (2ft) per minute of travel- for example, a machine operating as a speed of 1.8m (6ft) per minute should have three pairs of brushes.  (This guideline is only applicable to regular float glass and not to coated products such as low-emissivity [low-e] glass).
8. As an extra precaution, wetting the glass surface immediately before polishing greatly reduces the risk of marking.

Writing the Right Specifications

Architects and designers constantly look to Bear Glass for new ways to use glass in exterior and interior applications.  Writing proper specifications, especially when distinctive and unique types of glass are chosen, is critical to ensure the desired design is achieved.  Acid-etched glass is no exception.  If care is not taken, the glass ordered and installed on the jobsite may be nothing like the product selected based on samples submitted.  To ensure the acid-etched glass products selected are actually used by the general contractor, glass fabricator, and glazier, the following information should be included in the specifications: name of manufacturer, product brand name, glass thickness, substrate (glass or mirror), tint (e.g. clear, ultra-clear, blue, green, black, bronze, grey), type of finish (name), and whether to etch on one or two glass faces.  Warranties and standards are often overlooked when writing specifications.  Inherent in the float glass process are small gaseous inclusions and minor abrasions.  Consequently, occasional, small ‘bubbles’ and hairlines are normal and acceptable under recognized standards; from a normal viewing distance, they are barely noticeable.  To ensure acid-etched products are made from float glass that conforms to industry standards, the manufacturer should be consulted.  In Canada, glass should comply with Canadian General Standards Board (CAN/CSBG) 12.3-M91, Flat, Clear Float Glass (Quality: Glazing).  In the United States, ASTM International C 1036-01, Standard Specification for Flat Glass (Quality: Q3-Stock Sheet) should be followed.  The manufacturer’s product warranty should refer to these standards.  Clearly, it is important to be specific about the nature of the acid-etched glass product required.  Communicating specifications in detail to a glass professional can help ensure the chosen product meets desired goals and objectives.

The post Bear Glass New Jersey Acid Etched Glass appeared first on Bear Glass Blog.

Bear Glass Obscure Glass is a charming adornment for any home or business !  Bear Glass Obscure Glass has designs imprinted in glass for privacy, light diffusion, and embellishment.  With over 50 years of customer satisfaction, here at Bear Glass, we  continue to delight our customers with our expertise, variety, and pleasant experiences !

Why does Bear Glass guarantee the most customer overall satisfaction?

Bear Glass is customized for each and every customer.  Our obscure glass can be used for cabinets, windows, furtniture, shower doors and even frameless shower doors! For extra durability, our obscure glass could be laminated or tempered as well.  Laminated Glass is held together with a piece of plastic in between the two pieces of glasss.  Tempered Glass is heated in our ovens. Bear Glass will transform your idea into reality !

The post Bear Glass: Obscure Glass For Homes And Business appeared first on Bear Glass Blog.

Bevel-Rite was a custom fabricator of mirror and plate glass that was located at 501 Prospect St. Unit 110  Lakewood, NJ 08701. In September 1980, they were the first beveling company in the the state of New Jersey and had grown to be a leading source to the glass and mirror industry.

Unfortunately because Bevelrite closed they’re doors this past year and their customers were left with few alternatives. The owner Jason Glago wanted to help his long standing customers with their glass and mirror business so he came to the best. He formed a relationship with upper management at Bear Glass and Bevelrite is now associated with Bear Glass.

Bevelrite used to fabricate high polished edges, beveled edges, miters, holes, and special cut outs, as well as ogee edges for special  shapes and circles and was a distributor of many different types of stock sizes of glass and mirror.

At Bear Glass we can do all of this plus a whole lot more. Bear Glass is a full Glass Fabricator in Brooklyn, NY. We are third generation glaziers. We are at our current location for over 30 years. Here we utilize over 25, 000 Sq. ft. to its maximum. We deliver to the tri-state area 5 days a week, with 5 trucks on the road daily. Also, we ship nationwide.

Bear Glass Inc. has been providing the country with the best quality, service and craftsmanship in the industry. We pride ourselves on our organization & the reputation we have built with our clientele. We strive to provide the best communication and reliability available while maintaining quality and craftsmanship. Here at Bear Glass we are very particular about who’s products we choose to offer. We are always concerned about the best interest of our customers & their ultimate satisfaction and we are offering our top representative to all former Bevelrite customers. Here is his contact info:

Position: Senior Account Representative

Address : 399 20^th Street Brooklyn, New York 11215

Phone: 732-901-2626

Fax For Quotes: 732-901-2266 Attention Tom

E-mail For Quotes: Bevelrite@gmail.com

Here is what Tom can do for you: · Provide fast and reliable service  · Provide competitive quotes for your projects via fax or email for your convenience. · Increase market share, by having the ability to do customized work that could not be done locally. · Maximize your ROI by not subbing out any of our work·

The post Bevelrite Customers Are Now Being Serviced By Bear Glass appeared first on Bear Glass Blog.

For four generations, Bear Glass has been supplying the world’s finest specialty glass to architects, contractors, designers and home owners. Our stock of over 2, 000 varieties of specialty glass features architectural glass, cast glass, tempered glass, etched glass, antique glass, art glass / colored glass, restoration glass, back painted glass, patterned glass and more get used in unlimited applications. The incredible inventory together with decades of experience and service are the foundation of Bear Glass.

The unique finishing capability of Bear Glass keeps it ahead of all competition. We paint glass using our standard colors or can match the color you desire. Our paints are extremely durable and are architectural grade for indoor and outdoor use.

Bear Glass is also the largest distributor of Walker’s pattern acid etched specialty glass in nation. Pattern acid etched glass and mirror not only create a great visual effect but also textural effect, due to the depth variation of the design. We have available Pattern Acid Etch Glass in stock like: Pattern 101, Pattern 102, Pattern 103, Pattern 104 and 105. In Satin, Velour and Opaque finishes. We also have Patterns 301, 302, 303, 305 and 305.

Bear Glass also specializes in glue chip specialty glass. This attractive  Specialty Glass is created by applying hot glue to the sandblasted surface of annealed glass and as it dries, the glue shrinks and cools removing flakes of glass from the surface. This  specialty glass allows every design to be different, giving uniqueness to every piece of glass or mirror. Glue Chip s pecialty glass by Bear Glass is very popular for backgrounds in windows and cabinets and is especially beautiful combined with bevels and bevel clusters.

Bear Glass is one of the largest suppliers of specialty glass. While we are specialty fabricator, we do much more than create and etch designs on our customer’s glass. We supply glass for restaurant chains, commercial buildings and multiple facility construction projects all over. We supply superior specialty glass, custom mirrors and make specialty cuts, doing all the edgework and beveling, whatever the project calls for so all your glass and sign needs are taken care of.

Bear Glass ships   specialty glass products worldwide. We do everything on glass.

For more information or to order your specialty glass product, please contact Bear Glass at:

Factory / Office

Address :

Bear Glass Inc.

399 20^th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post Specialty Glass By Bear Glass In Brooklyn NY appeared first on Bear Glass Blog.