Bear Glass Is A Premier Walker Distributor.  We are better able to serve our customers with 2 facilities located in both Brooklyn NY and Tinton Falls NJ.  Our Motto is “ We Do Everything In Glass And Mirror”, so we are able to service any and all your glass and mirror needs.

How to Select the Right Acid-Etched Glass

While the glass etching process is generally the same, variations in the chemistry and other process parameters will create different glass surfaces with varied visual and performance characteristics

• Light diffusion
• Privacy
• Glare reduction
• Dimensional effect
• Visual appearance
• Integration with surrounding objects
• Light transmission
• Energy efficiency

An etched surface with rugged peeks and deep valleys absorb and diffuses light, rather than transmit or reflect it, resulting in a rich white opaque appearance.  On the other hand, an etched surface with smooth rounded bumps enhances light transmission and creates a more transparent glass, characterized by reduced reflective glare and a soft translucent appearance.

The type of acid-etch surface finish selected will render a different level of opacity and smoothness as well as create varied visual effects.  It will also have an impact on the following performance ratios:

–          Gloss

–          Visible light transmission

–          Visible light reflectance

–          Shading coefficient

–          Solar direct transmission

–          Solar direct reflectance

–          U-Value

Also, bare in mind that the type of glass substrate used will impact on the above-mentioned characteristics. For example, acid-etched glass made out of low-iron glass (e.g. Starphire ultra-clear glass by PPG) will create a translucent satin appearance without the “greening effect” of ordinary clear glass.  Similarly, acid-etched blue glass made out of PPG’s blue Pacifica will create a different visual effect than one made with Pilkington’s Artic Blue.

Consequently, both the acid-etch finish and the glass substrate used will impact on the color appearance, level of opacity and performance ratios of the acid-etched glass.

In order to enhance certain characteristics of the acid-etched glass, you may also consider etching the glass on both sides.  This is a good approach for applications requiring a higher level of opacity or a similar finish and visual effect on both sides of the glass panel (e.g. partitions).

The use of acid-etched glass for exterior applications may also be appropriate.  Because acid-etching is not a coating, its resistance properties in exterior conditions are essentially equivalent to un-etched glass.  However, it is important to point out that an etched surface with rugged peeks and deep valleys could lead to higher maintenance costs because dirt particles may be more difficult to remove.  Therefore, the use of an etched surface with a lighter finish (smooth rounded bumps) is recommended in exterior applications.

As you can see, being specific about the nature of the acid-etched glass product required is very important.  Do not hesitate to share your design and performance intent to our glass professionals to ensure the acid-etched glass product selected meets your goals and objectives.

For more information on How to Select the Right Acid-Etched Glass please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

217-44 98th Ave., Queens Village, NY – 11429
United States
 +1 (718) 832-3604
 sales@bearglass.com

If you are in New Jersey:

Bear Glass New Jersey

359 Essex Road

Tinton Falls New Jersey  07753

Phone: 732 901 2626

Fax: 732 901 2266

Email: Sales@BearGlassNJ.com

The post Bear Glass Can show You How To Select The Right Acid-Etched Glass appeared first on Bear Glass Blog.

Admit it or not, we spend most of the active hours of our day in office. Therefore it is very important to decorate our working space beautifully. What can be better than glass decoration or mirror for this?

Keeping our silver colored laptop on a table that is made up of glass greatly enhances the beauty of the overall space.

A glass tabletop i.e. working table will even be break-resistant. So we can keep a coffee mug, or your laptop, or anything over it, without fearing for any breakage. Next in terms of the mirror, we can use styles. There are many vintage designs available that we may use for our working chamber.

Especially if you are the boss, make your room something special before you arrange for an international meeting with your clients, the next time. We assure you, do the right things and you will get ample business offer the moment they enter your office room. Glass or mirror is also known for its aesthetic values.

You can set designs with glass for new office decor

Several spaces within the office need to be decorated well. Do not forget the office canteen area too. We can decorate office canteens with glass doors, or glass windows. Internationally we can even decorate the rooms with laminated glass. If you need ideas, consult Bear Glass. They have a team of experienced glass fabricators.

Bear Glass fabricators will take an overview of your rooms and give them a unique makeover. For example, add some more light to office rooms with a glass mirror. Believe us, your employees will love to sit there and work harder. Even if you decide to design your meeting room with glass floors, glass doors, and windows, then it will take the room to the next level.

We should not forget to design the printer area. Often we keep the office printer in a once secluded corner of the office work area. We have to understand that every corner is important. You can create room divider with glass and separate your sitting area, printer area, and file keeping area.

Alternatively, if you are worried about arranging a good space for keeping your files, there are solutions for you. You can design cabinets with glass to keep all your files, stationeries, and other things daily in the office. Even in your sitting space area is small, you would like to keep it modern and stylish. If your office management designs the reception area, internal back office area, and other areas with glass, all will just love it.

You can decorate the reception area with a beautiful framed glass mirror. Just think of keeping a black colored sofa and a round glass table to let the candidates come and sit. For example, it might have a round mirror framed beautifully, square mirror rectangular mirror framed, or any other decoration of your choice.

So, get your office re-decorated with glass and mirror designs today! Let us know if you consider Bear Glass’s products for glass-designs.

The post Enhance your office decoration with glass & mirror appeared first on Bear Glass Blog.

Glass v grooving is not an edging process, but uses similar polishing and grinding technology in producing decorative grooves (patterns) or plate grooves (straight) on the surface of glass. The depth of the v groove is related to the thickness of the glass, and it is not recommended to be fabricated on glass less than 1/8″ thick.

One special window or your entire home can be enhanced with the elegance of custom  v grooved glass. This special design treatment is heralded by architects and interior decorators alike for its distinctive charm. Custom v grooved glass is available in insulated windows and patio doors. Pick the style that matches your decor. Custom v grooved glass is available in several styles with 3 distinct groove effects to suit your taste.

V-Groove is a way to engrave any type of glass. Both lineal and curved patterns can be cut into the glass surface to create a distinctive look or to add a functional benefit.

V-Groove is cut into the glass using an innovative technique that is like using a chisel on wood. The first pass, called a grind, creates a textured opaque finish. It can be left like this or put through a second pass, or a polish, which creates a smooth clear finish. Or you can combine a wide grind with a narrower polish to create a shadow.

Bear Glass can create almost any pattern or design that you can think of. From traditional and ornate patterns to sleek contemporary geometric designs, with Bear Glass V-Groove you have plenty to consider – different finishes, different widths, applied to your design.

Our V-groove and face bevelling machine can produce unlimited designs to meet your specs of any job. We also have our own in house designers that can work with you on your designs. Whether you are working with glass or mirror we can meet your needs.

Bear Glass manufactures and offers V Groove Glass which are available in variety of shapes, sizes, colors and designs to match with the interiors and exteriors. These glasses are well suited for homeowners as they can give striking look to their windows and doors. Also, the transparency of V groove glass adds a different look to all the grooved products.

Our product range is also available in diverse patterns that can be engraved on any glass option such as:

• High-performance low-E glass
• Energy-saving heat mirror glass
• Even-tempered TUF Glass

We ship V Grooved glass worldwide.

To place an order for our V-grooved glass products, you can visit our store, or can pick up your phone to order the product. You may also visit our website to find more about the product detail, and directly place an order right there.

For more information, please contact us at:

FACTORY/OFFICE

Address:
Bear Glass Inc.
217-44 98th Ave. Queens Village, NY – 11429
United States
Phone: 718-832-3604
Email: sales@bearglass.com

The post What is V Grooving and how this technique can enhance your home or office appeared first on Bear Glass Blog.

An Art Glass can make your interior as well as exterior more colorful and attractive.

Do you want to present your interior as look like in the magazine?

If you want to modify your residential and commercial interior, you should try art glass. An art glass can be acid etched glass, sandblasted glass, stained glass, backpainted glass, glue chip glass or v-grooved glass, etc. These types of glass can be used for home, office, restaurants, hotels and any other commercial, cultural and as well as churches too. The appearance of stained glass is very colorful and elegant. We can see stained glass in churches window. But it is not only used in churches but also in residential purpose too. Now a days the use of backpainted glass is growing as backsplash purpose, furniture purpose, etc. It is a low-cost art glass.

Some Applications of Art Glass

1. Doors

In your shower room, you can use an acid etched or sandblasted glass door as well as glue chip glass too. We also provide any type of shower door, shower screens, bathtub door, and screens, etc. Frameless, framed, semi-frameless, we do shower door only in 7 days in your country. Acid etched glass can be used both in office and home.

2. Partition wall

In your office you can install acid etched glass, sandblasted glass, glue chip glass as partition wall. These glasses are able to protect your privacy by their obscurity. You can also install a full-length v-grooved glass door.

3. Furniture

Glue chip glass is a specialty Art Glass. Glue chip glass can be used in furniture like, cabinet doors, table tops, countertops, bedside table, etc. You can also a Sandblasted glass table top or an Acid etched glass table tops etc. these glasses are also used as cabinet doors or any other furniture. As a mirrored furniture v-grooved glass is also used. Bear Glass artisans can design any pattern by engraving a groove with modern v-grooving equipment on the surface of the glass. Art glass generally used to decorate the interiors. These glasses can be used in any type of furniture.

Art Glass is a low maintenance and durable can be used for both residential and commercial purpose. For decoration art glass is the best. For your next project, you can Contact Us.  You can also call us with your special needs and your unusual requirements at 718 832 3604 | 732 901 2626.

The post Make Your Christmas More Colorful using ART GLASS appeared first on Bear Glass Blog.

Bear Glass Is A Premier Walker Distributor.  We are better able to serve our customers with 2 facilities located in both Brooklyn NY and Tinton Falls NJ.  Our Motto is “ We Do Everything In Glass And Mirror”, so we are able to service any and all your glass and mirror needs.

Double Sided Acid-Etched Glass

Etching two faces of the glass provides many applications which can be used as much for residential as for commercial uses.

Some of the more common applications include:

–         Office enclosures

–         Interior Doors

–         Railings

–         Shelving

–         Furniture components

–         Interior partitions

–         Sealed units

–         And many more

Double sided acid-etched glass also has many advantages, such as:

–          It offers more opacity than one sided acid-etching, perfect for those looking for enhanced privacy or to use as spandrels in a building facade.

–          It provides a consistent finish on both sides                          

–          Glare is reduced on both sides of the glass

–         It offers flexibility with varied visual effects from different finishes: Opaque/Opaque, Velour/Velour and Satin/Satin

–         And finally, it offers the unique possibility of combining full surface etching on one side with an acid-etched pattern on the other

Going with the inspiration of the last advantage mentioned above, Bear Glass has come a long way from its first launch of  Walker  Nuance patterns in 2008.  In June 2012, Bear Glass was proud to announce the launch of six new patterns by Walker Glass , two of which featured double sided acid-etched glass, namely patterns 511 and 512.

Having a pattern on both sides of the glass is a brand new feature of the product line and provides a good cross section of  Nuance capabilities. This trait gives the impression the glass has greater depth.

Also available are custom designs, on either one face or two.  As an example, Bear Glass ran a prototype of a pattern etched on both sides which gives a sort of criss-cross effect.

This is very interesting in terms of the possibilities architects and designers will be able to create. The addition of this new feature, double sided acid-etched patterns, will stimulate the imagination of architects and designers and help them come up with custom patterns meeting their own design intent.

For more information on Double Sided Acid-Etched Glass please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

If you are in New Jersey:

Bear Glass New Jersey

359 Essex Road

Tinton Falls New Jersey  07753

P: 732 901 2626

F: 732 901 2266

E: Sales@BearGlassNJ.com

The post Bear Glass Double Sided Acid-Etched Glass appeared first on Bear Glass Blog.

Bear Glass Is A Premier Walker Distributor. We are better able to serve our customers with 2 facilities located in both Brooklyn NY and Tinton Falls NJ. Our Motto is ” We Do Everything In Glass And Mirror” so we are able to service any and all your glass and mirror needs.

Bear Glass NJ Acid Etched Glass is becoming trendy in design and construction.  The consistency and durability of the finish can reduce glare and reflection, add privacy, increase light transmission, and provide texture.  It is important to select the right acid-etched glass for an application, and avoid making issues during storage and fabrication.  Although the glass-etching process is generally consistent, variations in chemistry and other parameters create different surfaces with distinct visual and performance characteristics.  Glass is etched with an aqueous solution of hydrofluoric acid, which attacks the silica and roughens the glass surface.  Generally, the more ‘white’ or opaque the finish, the more rough and porous the surface is.  When choosing distinctive and unique types of glass, architects and designers often have specific objectives in mind.  With acid-etched glass, these goals can relate to light diffusion, light transmission, privacy, visual appearance, integration with surrounding objects, and energy efficiency through increased day lighting.  An etched surface with rugged peaks and deep valleys absorbs and diffuses light, rather than transmitting or reflecting it- the result is a rich, white, opaque appearance.  In contrast, an etched surface with smooth, rounded bumps enhances light transmission and creates a more transparent glass, characterized by reduced reflective glare and a soft translucent appearance.

Acid-etched Surface Finish

Acid-etched finished vary by manufacturer.  The type selected for a glass substrate renders a different level of opacity and smoothness and creates varied visual effects.  It also impacts performance ratios such as gloss, visible light transmission (VLT), visible light reflectance, shading coefficient, solar direct transmission, solar direct reflectance, and U-value.  The visual effect of the acid-etch finish on mirror varies depending on the extent of etching performed.  A lighter-etched mirror has more reflection whereas a deeper etch creates a matte finish and more depth in the glass.

Glass Substrate

The substrate also influences the color appearance, level of opacity, and performance ratios of acid-etched glass.  Many falsely believe pieces of ultra-clear glass look the same, irrespective of their origin; similarly, glass with a blue tint from manufacturer ABC is often incorrectly perceived to match the one produced by manufacturer XYZ.  Generally, the glass business markets different shades of glass in ultra-clear, green, blue, or black.  In addition, some glass floaters can make varying shades of one color.  For example, acid-etched products manufactured from low-iron glass have a translucent satin appearance without the ‘greening effect’ of ordinary clear glass.  Similarly, a piece of acid-etched glass made with a dark blue hue from one supplier creates a different visual effect than one made with light blue from the same manufacturer.  Consequently, the shade of the acid-etched glass or mirror likely varies among manufacturers, depending on the substrate used.  It is important to remember the acid-etched finish itself creates a different color appearance, with different tints having varying performance ratios.

Etching on both sides

Etching glass on both sides can enhance its characteristics.  This approach is suitable for applications requiring a higher level of opacity or a similar finish and visual effect on both sides of the glass panel (e.g. partitions).  Most glass is produced by the float process.  The raw materials- mainly silica sand, soda ash, and limestone- are melted in a furnace and then flowed onto a bath of molten tin.  The glass then takes form and gradually cools as it moves from the tin bath to a controlled cooling chamber.  Float glass is best etched on the ‘air’ or ‘atmosphere’ side of the sheet, due to the greater likelihood of impurities and surface imperfections on the ‘tin’ side.  Production of acid-etched mirrors and two-sided etched glass requires etching of the tin side, posing an increased risk of defects in the surface if inappropriately done.   When considering double-sided acid-etched glass or acid-etched mirror, the type of finish specified impacts quality.  The manufacturer of the acid-etched product can recommend the finish (if any) suitable for the application.

Exterior applications

Bear Glass New Jersey Acid Etched Glass may be appropriate for exterior applications, such as insulated glazing (IG) units, skylights, and balustrades.  As acid-etching is not a coating, its resistance properties in outside conditions are essentially equivalent to non-etched glass.  However, it is important to note an etched surface with rugged peaks and deep valleys could lead to higher maintenance costs because dirt particles may be harder to remove.  Therefore, the use on an etched surface with a lighter finish (i.e. smooth, rounded bumps) is recommended in exterior applications.  In these situations, the level and type of maintenance required is similar to that of non-etched glass.

Storage and Fabrication

If proper care is taken during storage and fabrication, acid-etched glass or mirror can be kept clean as easily as non-etched products.  Whether the glass is tempered, laminated, insulated, painted, or even bent, fabricators can preserve the quality of the final product.  However, the general suggestions for keeping acid-etched glass or mirror stain-free during storage and fabrication may not be suitable in all situations.  Fabricators should follow guidelines issued by the manufacturer of a particular product to prevent or fix any marks or stains that occur.

Storage

Proper storage practices can help avoid marking on acid-etched glass and mirror.  Storage spaces must be dry and adequately ventilated.  Sheets should not be stored in areas of high humidity or heat (e.g. places near steam or water pipes).  Spaces exposed to chemical fumes should also be avoided.  All these conditions promote staining.  Conversely, sheets should not be stored outdoors or in unheated areas.

Fabrication

Due to the particular characteristics of more rugged glass surfaces, extra care should be taken during their fabrication to minimize the likelihood of embedding grease or dirt into the surface.  Gloves must always be used when working with sheets.  When handling sheets using equipment with suction cups, the clean and dust-free cups should be applied to the flat, untreated side.  If this is impossible, care should be taken to ensure proper vacuum is achieved (i.e. testing must be done to be certain the cups ‘stick’ to the glass to handle to weight).  When edging glass, these practices should be followed:

1. The edging machine conveyors should be clean and free of grease and buildup of glass grindings or cerium oxide.
2. The conveyor must be regularly opened and the machine interior washed (particularly the brushes) using soapy water.
3. The front and back conveyor pads should be routinely brushed, until all traces of cerium oxide and glass grindings are removed.
4. The front and back conveyors must be synchronized at identical speeds.
5. Only coolants specifically recommended for glass grinding and that adhere closely to the manufacturer’s recommended dilution ration should be used.
6. Manufacturer guidelines for concentration levels must be followed when using cerium oxide, with care taken to never add more than the minimal amount necessary for good polishing.
7. Glass should be washed immediately after polishing.  Washer brushers with .36-mm (0.014-in) diameter nylon bristles offer the best results.  The glass washer should be equipped with one pair of upper and lower brushes for every 0.6m (2ft) per minute of travel- for example, a machine operating as a speed of 1.8m (6ft) per minute should have three pairs of brushes.  (This guideline is only applicable to regular float glass and not to coated products such as low-emissivity [low-e] glass).
8. As an extra precaution, wetting the glass surface immediately before polishing greatly reduces the risk of marking.

Writing the Right Specifications

Architects and designers constantly look to Bear Glass for new ways to use glass in exterior and interior applications.  Writing proper specifications, especially when distinctive and unique types of glass are chosen, is critical to ensure the desired design is achieved.  Acid-etched glass is no exception.  If care is not taken, the glass ordered and installed on the jobsite may be nothing like the product selected based on samples submitted.  To ensure the acid-etched glass products selected are actually used by the general contractor, glass fabricator, and glazier, the following information should be included in the specifications: name of manufacturer, product brand name, glass thickness, substrate (glass or mirror), tint (e.g. clear, ultra-clear, blue, green, black, bronze, grey), type of finish (name), and whether to etch on one or two glass faces.  Warranties and standards are often overlooked when writing specifications.  Inherent in the float glass process are small gaseous inclusions and minor abrasions.  Consequently, occasional, small ‘bubbles’ and hairlines are normal and acceptable under recognized standards; from a normal viewing distance, they are barely noticeable.  To ensure acid-etched products are made from float glass that conforms to industry standards, the manufacturer should be consulted.  In Canada, glass should comply with Canadian General Standards Board (CAN/CSBG) 12.3-M91, Flat, Clear Float Glass (Quality: Glazing).  In the United States, ASTM International C 1036-01, Standard Specification for Flat Glass (Quality: Q3-Stock Sheet) should be followed.  The manufacturer’s product warranty should refer to these standards.  Clearly, it is important to be specific about the nature of the acid-etched glass product required.  Communicating specifications in detail to a glass professional can help ensure the chosen product meets desired goals and objectives.

The post Bear Glass New Jersey Acid Etched Glass appeared first on Bear Glass Blog.

Bear Glass does everything in glass and mirror! We are a premier Dreamwalls Glass distributor. We have fabrication facilities in both Brooklyn New York, and Tinton Falls NJ. Dreamwalls Color Glass is manufactured using a propietary paint technolgy developed specifically for superior adhesion to glass.

From upscale commercial interiors to just about anywhere tile can be installed on walls, back painted glass adds brilliant color, shine and sophistication without the high maintenance grout lines. Transform ordinary walls into stunning interiors with Back Painted Glass. Widely popular in Europe, reverse and back painted glass is the perfect alternative to traditional tile, paint, and wallpaper, offering a custom glass finish that is modern, clean, seamless, vibrant, and hygienic.

The modern elegance makes this solution perfect for kitchens, bathrooms, showers, and many other areas of the home. In fact, back painted glass is so clean lined and beautiful, that it is increasingly being specified by leading interior designers and architects for new and innovative residential applications such as kitchen backsplashes, bathroom & shower walls, bar splashbacks, closet doors, cabinets, and furniture as well as for upscale commercial interiors, offices, and hotels.

There are currently 12 stock colors of annealed Dreamwalls Color Glass ready to ship. However, the color possibilities are limitless due to a computerized intermix system and our trained staff of color experts who ensure that the color you specify is the color you see. You choose a color from any color deck you use in your day-to-day business, and our experts can match it.

After the glass is coated with our unique paint, it is heat-cured and coated again with a backing paint for additional protection that is also heat-cured. This ensures that the paint remains durable during handling and fabrication to reduce the liklihood of scratches and cut-throughs.

Backpainted glass panels are available on either plate or low-iron glass. Custom shapes and edgework are also available. Back-painted glass is ideal for use in architectural elements such as walls, countertops, and glass backsplashes. When opacity and an easily cleaned surface are required, yet a specific color is preferred, backpainted glass is an excellent choice.

Benefits of Dreamwalls Color Glass:

• Easy to clean
• Moisture resistant
• Limitless color matching
• Hygienically non-porous
• Durable
• Temperable

We match the color codes of all leading paint manufacturers, including Benjamin Moore, Sherwin Williams, Kelly Moore, and many others. Computer color matching is also available.

Looking to add even more depth to your Bear Glass Back Painted Glass? Our textured glass can be color-coated on the smooth side or textured side. Each alternative produces its own unique look.

MORE BACK PAINTED FACTS:

• Bear Glass Back Painted Glass is durable, nonporous and easy to install. And with no grout lines, cleaning is fast and easy.
• With a standard sheet size of 84” x 130”, most projects can be done with very few seams, if any.
• Bear Glass Back Painted Glass is available in all standard glass thicknesses: 1/8”, 1/4?, 3/8”, 1/2?, 3/4?, and 1”.
• You can cut Bear Glass Back Painted Glass to virtually any shape. You can drill, notch, temper, and even bend it.

Bear Glass Back Painted Glass countertop edges can be flat-polished, pencil-polished, beveled, bull-nosed, mitered, ogee or chipped.

Samples are easily available

We’re happy to provide dealer showroom samples of the various colors, thicknesses and textures of Bear Glass Back Painted Glass.

The cost for individual samples for specific jobs is $45 each. We’ll credit the cost of up to two samples when the job is completed.

Bear Glass ships their back painted glass products worldwide. We do everything in glass and mirror.

For more information or to order your  back painted glass, please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post Bear Glass Does Back Painted Glass In New Jersey And New York appeared first on Bear Glass Blog.

Bear Glass specializes in the design and manufacture of all kinds of glass, featuring new and recycled glass countertops, table tops, privacy panels, wall dividers, wall coverings, balustrades and so much more. Skilled artists from Bear Glass create featured design elements that are both stunning to behold and a pleasure to use.

The rich look of glass combined with the hygienic nature of a non-porous surface make for a beautiful and practical surfacing material.

Now Glass Countertops adds even more with the ability to choose virtually any color along with a myriad of special finishes that really stand out. Combined with textures, the sky is the limit.

Glass countertops by Bear Glass can even give you a brushed stainless or metal look through glass that is truly sensational.

With a remarkable blend of function and art, Bear Glass offers glass countertops that literally transform your eating area. Our exclusive technology can make your kitchen glass countertops truly unique.

• Glass countertops 1.5″ thick or more.
• A smooth, glossy contemporary finish on every glass countertops, with a huge choice of available imbedded textures.
• Custom designs of your glass countertops with infused color to create your personalized artistic touch.
• Durability that rivals any common countertop product.

Each Bear Glass kitchen countertop begins with a handmade process, every finished product maintains its uniqueness. We provide different texture for countertops:

• Natura
• Carco
• Vaga
• Pebblo
• Dropa
• Minima
• Granula
• Brossa

Bear Glass offers a full LED solution for all your lighting needs in order to further highlight your glass countertops. White LED & Multicolor Led gives a special looks to your countertops.

Bear Glass offers wide selection of thicknesses, edge treatment, surface treatment, colors and shapes.

A sleek and modern look, combined with a low carbon emissions production process makes Bear Glass an environmentally preferred product. Bear Glass uses transparent tempered glass, post-consumer recycled glass to make the best of glass countertops.

Bear Glass is extremely durable and low maintenance.  Using ForeverSeal® helps make Bear Glass more stain and scratch resistant than “ordinary” granite.  Bear Glass is also heat resistant and cold resistant. The non-porous surface means spills won’t stain it and cleaning is very easy. Bear Glass is perfect for modern homes and businesses looking to express a fresh, forward looking sensibility.

Bear Glass ships their glass countertops products worldwide. We do everything in glass.

For more information or to order your glass countertops, please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20^th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post Glass Countertops By Bear Glass Brooklyn NY appeared first on Bear Glass Blog.

Resin Stained Glass is one of the new processes by Bear Glass when you can lay down just any design you want on the glass in variety of colors. The resin is applied to the outer layer of glass, using a stained resin machine. Bear Glass applies the resin also to mirrored glass. Traditional handcrafted Resin Stained Glass by Bear Glass has long been recognized for its beauty and dazzling visual impact.

Bear Glass does not use any lead strips in the process of making the Resin Stained Glass but instead uses UV stable, colorfast acrylic resins. The acrylic resin is extremely durable and one can easily compare it with a toughened glass.

Bear Glass can do a whole range of standard Resin Stained Glass designs, still we believe on the visions of our customers. Resin Stained Glass by Bear Glass can really transform a dull back door piece of glass or be used to make a big centerpiece in a landing or hallway. Bear Glass creates beautiful Resin Stained Glass for door panels, windows, fanlights, mirrors etc. The choice of design, color and texture is extensive.

Bear Glass can make faceted glass windows with Resin Stained Glass. Bear Glass artisans use one inch (2.5 cm) thick slabs of glass, cut into the desired shapes then selectively faceted on the interior edges to enhance the refraction of light. Then an epoxy resin is poured between each piece to create the structural matrix. Finally, the resin is covered with a layer of colored granules.

Bear Glass combines the resin stain with silk screening and glass grooving to create even more texture and depth in your design. For came colors you aren’t limited as you are with traditional leaded beveled glass designs.  With Resin Stained glass by Bear Glass you can have red, white, taupe, gun metal, just about any color you want.

One thing to note here is that Resin Stained Glass isn’t a good choice if one just needs a handful of pieces. But for doing multiple pieces this is a beautiful solution for unlimited design capabilities.

One big difference between the Resin Stained Glass and traditional decorative leaded beveled glass is, you can make dual IG units out of them as the Resin stain is applied to tempered glass also.

The advantages of Resin Stained Glass by Bear Glass are:

• Unlimited Design Possibilities: Any design that can be drawn on paper can be reproduced as a stained glass pattern.
• Cost effective: One-half to two-thirds the cost of traditional stained glass, even for one-off designs.
• Energy efficiency: The stained glass pattern can be put directly on modern double or triple paned glass, even on glass that is in a manufactured window sash.
• Cost effective custom work: Computer design and modern manufacturing techniques keep the cost on custom work to about one half the cost of traditional stained glass.
• High volume production runs feasible: The robotic CNC resin dispensing table enables high volume runs with excellent accuracy and reproducibility for every piece.

Bear Glass ships their Resin Stained Glass products worldwide. We do everything on glass.

For more information or to order your Resin Stained Glass from Bear Glass, please contact with Bear Glass at:

Factory / Office

Address :

Bear Glass Inc.

399 20^th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post Resin Stained Glass by Bear Glass In Brooklyn New York appeared first on Bear Glass Blog.

Patterned glass is a not-perfectly-smooth structure with different patterns impressed on it. The depth, size and shape of the patterns largely determine the magnitude and direction of reflection. Patterned glass or Decorative glass by Bear Glass usually transmits only slightly less light than clear glass. It can be used for a variety of applications like interior design and decorations, furniture, windows, street furniture etc.

Patterned glass by Bear Glass is made with a rolled glass process. All rolled patterned glass begins as a batch of materials, including silica sand, soda, and lime. These materials are melted together in a tank, and then the molten glass mixture is fed onto a machine slab. The glass flows under a refractory gate which controls glass volume and speed then moves between two counter-rotating, water-cooled rollers. One of these rollers is embossed, imprinting a distinct pattern onto the soft surface of the glass while the other roller is smooth.

The result is a piece of glass that is patterned and textured on one side, while smooth on the reverse. The distance between the two rollers determines the ultimate thickness of the glass. After it moves between the rollers, patterned glass is annealed or cooled slowly in order to remove any residual stresses. Rolled patterned glass can then be cut by the expert artisans of Bear Glass into standard sizes or cut into customized sizes for a specific customer application.

Some popular patterns, known as camphor glass, combined the use of clear glass with an acid-finished design.

Basically patterned glass has a pattern impressed on one side of the glass which prevents someone from seeing though it, for privacy. Pattern glass can also be ordered in various tints as well. A common application of this sort is when used in privacy walls to separate one room from another. Patterned glass is not-perfectly-smooth structure with different patterns impressed on it.

Patterned glass by Bear Glass can be used in commercial, residential, office or specialty applications. They have various usage including shower doors and tub enclosures including frameless shower doors, interior partitions, translucent door and window treatments, foyers and vestibules, patio furniture, shelving, decorative furniture, and lighting fixtures. Pattern glass are available in large amount of patterns in Bear Glass stores.

Bear Glass ships their Patterned glass products worldwide. We do everything on glass.

For more information or to order your Patterned glass, please contact Bear Glass at:

Factory/ Office:

Address :

Bear Glass Inc.

399 20^th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post Patterned Glass By Bear Glass In Brooklyn NY appeared first on Bear Glass Blog.