Bear Glass Is A Premier Walker Distributor.  We are better able to serve our customers with 2 facilities located in both Brooklyn NY and Tinton Falls NJ.  Our Motto is “ We Do Everything In Glass And Mirror”, so we are able to service any and all your glass and mirror needs.

How to Select the Right Acid-Etched Glass

While the glass etching process is generally the same, variations in the chemistry and other process parameters will create different glass surfaces with varied visual and performance characteristics

• Light diffusion
• Privacy
• Glare reduction
• Dimensional effect
• Visual appearance
• Integration with surrounding objects
• Light transmission
• Energy efficiency

An etched surface with rugged peeks and deep valleys absorb and diffuses light, rather than transmit or reflect it, resulting in a rich white opaque appearance.  On the other hand, an etched surface with smooth rounded bumps enhances light transmission and creates a more transparent glass, characterized by reduced reflective glare and a soft translucent appearance.

The type of acid-etch surface finish selected will render a different level of opacity and smoothness as well as create varied visual effects.  It will also have an impact on the following performance ratios:

–          Gloss

–          Visible light transmission

–          Visible light reflectance

–          Shading coefficient

–          Solar direct transmission

–          Solar direct reflectance

–          U-Value

Also, bare in mind that the type of glass substrate used will impact on the above-mentioned characteristics. For example, acid-etched glass made out of low-iron glass (e.g. Starphire ultra-clear glass by PPG) will create a translucent satin appearance without the “greening effect” of ordinary clear glass.  Similarly, acid-etched blue glass made out of PPG’s blue Pacifica will create a different visual effect than one made with Pilkington’s Artic Blue.

Consequently, both the acid-etch finish and the glass substrate used will impact on the color appearance, level of opacity and performance ratios of the acid-etched glass.

In order to enhance certain characteristics of the acid-etched glass, you may also consider etching the glass on both sides.  This is a good approach for applications requiring a higher level of opacity or a similar finish and visual effect on both sides of the glass panel (e.g. partitions).

The use of acid-etched glass for exterior applications may also be appropriate.  Because acid-etching is not a coating, its resistance properties in exterior conditions are essentially equivalent to un-etched glass.  However, it is important to point out that an etched surface with rugged peeks and deep valleys could lead to higher maintenance costs because dirt particles may be more difficult to remove.  Therefore, the use of an etched surface with a lighter finish (smooth rounded bumps) is recommended in exterior applications.

As you can see, being specific about the nature of the acid-etched glass product required is very important.  Do not hesitate to share your design and performance intent to our glass professionals to ensure the acid-etched glass product selected meets your goals and objectives.

For more information on How to Select the Right Acid-Etched Glass please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

217-44 98th Ave., Queens Village, NY – 11429
United States
 +1 (718) 832-3604
 sales@bearglass.com

If you are in New Jersey:

Bear Glass New Jersey

359 Essex Road

Tinton Falls New Jersey  07753

Phone: 732 901 2626

Fax: 732 901 2266

Email: Sales@BearGlassNJ.com

The post Bear Glass Can show You How To Select The Right Acid-Etched Glass appeared first on Bear Glass Blog.

In today’s fast world with technology advancing as we speak, businesses need all the help they can get to outdo the competition. Glass nameplate can make all the difference, giving you the edge you need to garner more of the market space.

 Benefits of custom nameplate maker and banners

Custom signs allow you to spread your brand’s message to the local community, increasing your brand’s recognition, trust, and standing. Standards nameplate maker will also promote your business, but when it looks just the same as everyone else signs, your nameplate won’t stand out to passers-by and traffic, instead, it will just be one of many signs that blend into the background.

This is why custom nameplate maker and banners are so important to promote your business because they can be designed to be colorful and innovative, reflecting your brand and really standing out from the crowd. It’s also important that your signs are designed around your logo, so the help of a good graphic designer to create a truly unique logo for your business is one of the factors that you should consider.

Tips for creating the ultimate custom Glass Nameplate

Get a Glass nameplate maker and position your business to overtake the competition today. Click here to view our full range of customizable designs or send us an inquiry SALES@BEARGLASS.COM and one of our estimators will be in touch to discuss your project.

The post Make Your Business Stand Out With Glass Nameplate appeared first on Bear Glass Blog.

In the world of sandblasting there are two techniques, etching and carving. Etching is when abrasive is blasted at the glass lightly to give the glass a frosty appearance. Depending on the speed and angle the abrasive is being applied, different shades can be created, allowing the glass to be a true work of art. Carving on the other hand is when steadily sandblasting is done to the surface of a glass using stencil which protects the areas you don’t want to be carved out. Sandblasting as a technique for carving can be much nuanced, with differing depths and angles of cuts creating an array of lighting effects that may be quite beautiful.

Common to residential homes, there is a need for privacy in areas of the front entry or over a tub in the bathroom. These are areas where an elegant or sophisticated design can lend to the privacy desired along with adding beauty and character to a home. Etched glass designs add a great look to recreation areas and bathroom mirrors. Home bar mirrors with your own personal name for your get away create an interesting and elegant look for entertaining or personal enjoyment. Etched glass table tops have enhanced many dining rooms with sandblasted and carved designs.

Many of our clients prefer to have attractive etched glass signs pin mounted right above their reception desks which can also be lighted or colored with your corporate colors. These signs can be very versatile in function for the corporate office or small office environment. From company name recognition to adding an element of design, Bear Glass can provide the correct solution for your needs!

In many commercial environments, the need for name recognition is vitally important. By having your corporate logo/identity sandblasted onto the front entry doors or on a glass curtain wall in a conference room, you are establishing your name with your clients and showing a sense of pride in your company. Also, it is very helpful for clients in locating your office space in larger office buildings . The same is applicable for commercial interior decoration as well, along with home-office spaces. You must have observed the practical use of etched glass products in pubs, restaurants or bars, where privacy plays a big role in space decoration.

Glass etching on an entrance to a home or office creates a dramatic first impression like no other architectural material can. Etched glass entries and etched glass doors are elegant and quite sophisticated, modern yet can be very classic. Even the best etched glass design is only as good as the technique used and its execution. Bear Glass can deliver on both quality and timeliness which is why leading architects and contractors rely on Bear Glass to make their glass etching vision a reality. It does not matter if the frosted glass design or frosted film pattern is in an office, restaurant, laboratory or an airplane, Bear Glass has the capability of performing this work on the job site, without the mess and dust of conventional systems, enabling any glass to be sandblasted anywhere that it may be located.

For more information, please contact us. We look forward to working with you!

FACTORY/OFFICE

Address:
Bear Glass Inc.
217-44 98th Ave., Queens Village, NY – 11429
United States
 +1 (718) 832-3604
 sales@bearglass.com

The post Etch It Up With Bear Glass!!! appeared first on Bear Glass Blog.

Bear Glass provides the service of sandblasting glass.   Sandblasting glass is becoming one of the very popular methods of etching glass.  Sandblasting glass can result in producing the most elegant etching on glass.   There are various techniques used in sandblasting glass that can create works of art as a finished product.  Sandblasting glass creates beautiful frosted and carved designs in glass.  Sandblasting has a bunch of functions.

It can be used to soften rough surfaces, roughen soft surfaces, take off unwanted surfaces, or shape a surface.   Items as small as a pendant and as large as front doors can be sandblasted.  The technique takes practice and the right tools, plus a delicate touch if you’re etching glass.  Bear Glass specializes in equipment for decorative sandblasting.  Whether you’re blasting trophies or decorative art glass, you can count on Bear Glass to have the answers you need.   We are happy to assist you in assembling a complete system, including all the small accessories.   We can help you match what equipment you need with equipment you already have.   With Bear Glass, you get the industry’s best-priced sandblasting systems supported by lifetime technical assistance.

Sandblasting can be used for interior fixtures like shelves, tables, and more. Sandblasting is done with a high-speed machine that bombards the glass panel with sand, walnut husks or other materials.  Sandblasting glass offers versatility in creating design effects. First, homeowners can choose a level of glass opaqueness from light, medium or heavy.  Also, sandblasting makes it possible to “frost” sections of a glass shower, such as creating privacy strips or patterns.  Sandblasting glass is also known as sandcarving.  This method allows a greater control method to produce the highest quality work.

The process of sandblasting glass uses the same steps of producing any etching stencil but the material usually needs to be thicker to withstand the pressure of abrasive blasting as sandblasting glass does.   The sandblasting glass method takes place by blasting abrasive from the sandblaster over the stencil resist material.  This is all powered by the supplied air from the air compressor.   The glass becomes eroded to create a frosted elegant design.

In the world of Sandblasted Glass, there are two techniques, etching and carving.  Etching is when abrasive is blasted at the glass lightly to give the glass a frosty appearance.  Depending on the speed and angle the abrasive is being applied, different shades can be created, allowing the glass to be a true work of art.  Carving, on the other hand, is when steadily sandblasting is done to the surface of a glass using stencil which protects the areas you don’t want to be carved out.  Sandblasting as a technique for carving can be much nuanced, with different depths and angles of cuts creating an array of lighting effects that may be quite beautiful.
We also do CustomSandblasted Glass.
Call Bear Glass today for your sandblaster Glass needs.

For more information on our Sandblasted Glass please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

If you are in New Jersey:

Bear Glass New Jersey

359 Essex Road

Tinton Falls New Jersey 07753

P: 732 901 2626

F: 732 901 2266

E: Sales@BearGlassNJ.com

The post Sandblasted Glass by Bear Glass appeared first on Bear Glass Blog.

Bear Glass Is A Premier Walker Distributor.  We are better able to serve our customers with 2 facilities located in both Brooklyn NY and Tinton Falls NJ.  Our Motto is “ We Do Everything In Glass And Mirror”, so we are able to service any and all your glass and mirror needs.

Double Sided Acid-Etched Glass

Etching two faces of the glass provides many applications which can be used as much for residential as for commercial uses.

Some of the more common applications include:

–         Office enclosures

–         Interior Doors

–         Railings

–         Shelving

–         Furniture components

–         Interior partitions

–         Sealed units

–         And many more

Double sided acid-etched glass also has many advantages, such as:

–          It offers more opacity than one sided acid-etching, perfect for those looking for enhanced privacy or to use as spandrels in a building facade.

–          It provides a consistent finish on both sides                          

–          Glare is reduced on both sides of the glass

–         It offers flexibility with varied visual effects from different finishes: Opaque/Opaque, Velour/Velour and Satin/Satin

–         And finally, it offers the unique possibility of combining full surface etching on one side with an acid-etched pattern on the other

Going with the inspiration of the last advantage mentioned above, Bear Glass has come a long way from its first launch of  Walker  Nuance patterns in 2008.  In June 2012, Bear Glass was proud to announce the launch of six new patterns by Walker Glass , two of which featured double sided acid-etched glass, namely patterns 511 and 512.

Having a pattern on both sides of the glass is a brand new feature of the product line and provides a good cross section of  Nuance capabilities. This trait gives the impression the glass has greater depth.

Also available are custom designs, on either one face or two.  As an example, Bear Glass ran a prototype of a pattern etched on both sides which gives a sort of criss-cross effect.

This is very interesting in terms of the possibilities architects and designers will be able to create. The addition of this new feature, double sided acid-etched patterns, will stimulate the imagination of architects and designers and help them come up with custom patterns meeting their own design intent.

For more information on Double Sided Acid-Etched Glass please contact Bear Glass at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

If you are in New Jersey:

Bear Glass New Jersey

359 Essex Road

Tinton Falls New Jersey  07753

P: 732 901 2626

F: 732 901 2266

E: Sales@BearGlassNJ.com

The post Bear Glass Double Sided Acid-Etched Glass appeared first on Bear Glass Blog.

Bear Glass Is A Premier Walker Distributor. We are better able to serve our customers with 2 facilities located in both Brooklyn NY and Tinton Falls NJ. Our Motto is ” We Do Everything In Glass And Mirror” so we are able to service any and all your glass and mirror needs.

Bear Glass NJ Acid Etched Glass is becoming trendy in design and construction.  The consistency and durability of the finish can reduce glare and reflection, add privacy, increase light transmission, and provide texture.  It is important to select the right acid-etched glass for an application, and avoid making issues during storage and fabrication.  Although the glass-etching process is generally consistent, variations in chemistry and other parameters create different surfaces with distinct visual and performance characteristics.  Glass is etched with an aqueous solution of hydrofluoric acid, which attacks the silica and roughens the glass surface.  Generally, the more ‘white’ or opaque the finish, the more rough and porous the surface is.  When choosing distinctive and unique types of glass, architects and designers often have specific objectives in mind.  With acid-etched glass, these goals can relate to light diffusion, light transmission, privacy, visual appearance, integration with surrounding objects, and energy efficiency through increased day lighting.  An etched surface with rugged peaks and deep valleys absorbs and diffuses light, rather than transmitting or reflecting it- the result is a rich, white, opaque appearance.  In contrast, an etched surface with smooth, rounded bumps enhances light transmission and creates a more transparent glass, characterized by reduced reflective glare and a soft translucent appearance.

Acid-etched Surface Finish

Acid-etched finished vary by manufacturer.  The type selected for a glass substrate renders a different level of opacity and smoothness and creates varied visual effects.  It also impacts performance ratios such as gloss, visible light transmission (VLT), visible light reflectance, shading coefficient, solar direct transmission, solar direct reflectance, and U-value.  The visual effect of the acid-etch finish on mirror varies depending on the extent of etching performed.  A lighter-etched mirror has more reflection whereas a deeper etch creates a matte finish and more depth in the glass.

Glass Substrate

The substrate also influences the color appearance, level of opacity, and performance ratios of acid-etched glass.  Many falsely believe pieces of ultra-clear glass look the same, irrespective of their origin; similarly, glass with a blue tint from manufacturer ABC is often incorrectly perceived to match the one produced by manufacturer XYZ.  Generally, the glass business markets different shades of glass in ultra-clear, green, blue, or black.  In addition, some glass floaters can make varying shades of one color.  For example, acid-etched products manufactured from low-iron glass have a translucent satin appearance without the ‘greening effect’ of ordinary clear glass.  Similarly, a piece of acid-etched glass made with a dark blue hue from one supplier creates a different visual effect than one made with light blue from the same manufacturer.  Consequently, the shade of the acid-etched glass or mirror likely varies among manufacturers, depending on the substrate used.  It is important to remember the acid-etched finish itself creates a different color appearance, with different tints having varying performance ratios.

Etching on both sides

Etching glass on both sides can enhance its characteristics.  This approach is suitable for applications requiring a higher level of opacity or a similar finish and visual effect on both sides of the glass panel (e.g. partitions).  Most glass is produced by the float process.  The raw materials- mainly silica sand, soda ash, and limestone- are melted in a furnace and then flowed onto a bath of molten tin.  The glass then takes form and gradually cools as it moves from the tin bath to a controlled cooling chamber.  Float glass is best etched on the ‘air’ or ‘atmosphere’ side of the sheet, due to the greater likelihood of impurities and surface imperfections on the ‘tin’ side.  Production of acid-etched mirrors and two-sided etched glass requires etching of the tin side, posing an increased risk of defects in the surface if inappropriately done.   When considering double-sided acid-etched glass or acid-etched mirror, the type of finish specified impacts quality.  The manufacturer of the acid-etched product can recommend the finish (if any) suitable for the application.

Exterior applications

Bear Glass New Jersey Acid Etched Glass may be appropriate for exterior applications, such as insulated glazing (IG) units, skylights, and balustrades.  As acid-etching is not a coating, its resistance properties in outside conditions are essentially equivalent to non-etched glass.  However, it is important to note an etched surface with rugged peaks and deep valleys could lead to higher maintenance costs because dirt particles may be harder to remove.  Therefore, the use on an etched surface with a lighter finish (i.e. smooth, rounded bumps) is recommended in exterior applications.  In these situations, the level and type of maintenance required is similar to that of non-etched glass.

Storage and Fabrication

If proper care is taken during storage and fabrication, acid-etched glass or mirror can be kept clean as easily as non-etched products.  Whether the glass is tempered, laminated, insulated, painted, or even bent, fabricators can preserve the quality of the final product.  However, the general suggestions for keeping acid-etched glass or mirror stain-free during storage and fabrication may not be suitable in all situations.  Fabricators should follow guidelines issued by the manufacturer of a particular product to prevent or fix any marks or stains that occur.

Storage

Proper storage practices can help avoid marking on acid-etched glass and mirror.  Storage spaces must be dry and adequately ventilated.  Sheets should not be stored in areas of high humidity or heat (e.g. places near steam or water pipes).  Spaces exposed to chemical fumes should also be avoided.  All these conditions promote staining.  Conversely, sheets should not be stored outdoors or in unheated areas.

Fabrication

Due to the particular characteristics of more rugged glass surfaces, extra care should be taken during their fabrication to minimize the likelihood of embedding grease or dirt into the surface.  Gloves must always be used when working with sheets.  When handling sheets using equipment with suction cups, the clean and dust-free cups should be applied to the flat, untreated side.  If this is impossible, care should be taken to ensure proper vacuum is achieved (i.e. testing must be done to be certain the cups ‘stick’ to the glass to handle to weight).  When edging glass, these practices should be followed:

1. The edging machine conveyors should be clean and free of grease and buildup of glass grindings or cerium oxide.
2. The conveyor must be regularly opened and the machine interior washed (particularly the brushes) using soapy water.
3. The front and back conveyor pads should be routinely brushed, until all traces of cerium oxide and glass grindings are removed.
4. The front and back conveyors must be synchronized at identical speeds.
5. Only coolants specifically recommended for glass grinding and that adhere closely to the manufacturer’s recommended dilution ration should be used.
6. Manufacturer guidelines for concentration levels must be followed when using cerium oxide, with care taken to never add more than the minimal amount necessary for good polishing.
7. Glass should be washed immediately after polishing.  Washer brushers with .36-mm (0.014-in) diameter nylon bristles offer the best results.  The glass washer should be equipped with one pair of upper and lower brushes for every 0.6m (2ft) per minute of travel- for example, a machine operating as a speed of 1.8m (6ft) per minute should have three pairs of brushes.  (This guideline is only applicable to regular float glass and not to coated products such as low-emissivity [low-e] glass).
8. As an extra precaution, wetting the glass surface immediately before polishing greatly reduces the risk of marking.

Writing the Right Specifications

Architects and designers constantly look to Bear Glass for new ways to use glass in exterior and interior applications.  Writing proper specifications, especially when distinctive and unique types of glass are chosen, is critical to ensure the desired design is achieved.  Acid-etched glass is no exception.  If care is not taken, the glass ordered and installed on the jobsite may be nothing like the product selected based on samples submitted.  To ensure the acid-etched glass products selected are actually used by the general contractor, glass fabricator, and glazier, the following information should be included in the specifications: name of manufacturer, product brand name, glass thickness, substrate (glass or mirror), tint (e.g. clear, ultra-clear, blue, green, black, bronze, grey), type of finish (name), and whether to etch on one or two glass faces.  Warranties and standards are often overlooked when writing specifications.  Inherent in the float glass process are small gaseous inclusions and minor abrasions.  Consequently, occasional, small ‘bubbles’ and hairlines are normal and acceptable under recognized standards; from a normal viewing distance, they are barely noticeable.  To ensure acid-etched products are made from float glass that conforms to industry standards, the manufacturer should be consulted.  In Canada, glass should comply with Canadian General Standards Board (CAN/CSBG) 12.3-M91, Flat, Clear Float Glass (Quality: Glazing).  In the United States, ASTM International C 1036-01, Standard Specification for Flat Glass (Quality: Q3-Stock Sheet) should be followed.  The manufacturer’s product warranty should refer to these standards.  Clearly, it is important to be specific about the nature of the acid-etched glass product required.  Communicating specifications in detail to a glass professional can help ensure the chosen product meets desired goals and objectives.

The post Bear Glass New Jersey Acid Etched Glass appeared first on Bear Glass Blog.

Bear Glass Is The Premier Walker Glass Distributor

Bear Glass stocks all Walker’s Products in our 25000 SQFT facility located in Brooklyn New York and we would like to help our customers better understand the different patterned glass that we offer through Walker.

Walker Textures Nuance Stock Patterned Acid-Etched Glass and Mirror

Walker Textures Nuance Stock has been created to answer the growing demand for unique and environmentally friendly material for decorative and architectural applications. Patterned acid-etched glass and mirror will not only provide a great visual effect but a textural effect as well, due to the depth variation of the design.

The stock product line of acid-etched patterns is available in five distinctive designs with the 100 and 300 series. The 100 series is an acid-etched finish which combines Velour and Satin creating a true sense of privacy while maintaining a design element to the glass. The 300 series is our Satin finish on clear glass giving greater visibility to the decor through the glass. Both of these series feature a relief effect which adds character to the glass surface.

Patterned Acid-Etched Glass and Mirror Advantages

• Consistent finish and appearance
• Maintenance free
• More mar-resistant than sandblasted glass
• Does not peel or discolor like films
• Does not scratch off like coatings

Glass – Velour on Satin

Glass – Satin on Clear

Patterned Acid-etched Glass and Mirror Specifications

Substrates : Glass and mirror

• Colors: Clear, bronze, grey, black, green, blue or ultra-clear *
• Glass thicknesses: 3 mm to 19 mm **
• Mirror thicknesses: 3 mm to 6 mm **
• Sizes available: Standard 96″ x 130″, on request 84” x 130” **
• Finishes:

Series 100 Velour on Satin
Series 300 Satin on Clear

• Selected skus available in less than 4, 000 pound quantities

Walker Textures Nuance Custom Acid-etched Glass and Mirror

A world of countless creative patterns opens up to you with Walker Textures Nuance Custom. Now you can let your imagination run wild and create virtually any design. Thanks to our continuous research and development we are achieving high-quality registration and an unmatched level of detail.

The custom product line features three different acid-etch combinations allowing you to obtain your desired result. The 100 series combines two of our finishes Velour on Satin. The 200 series is our Velour on clear glass and the 300 series is our Satin on clear glass. All of these combinations create a nice textural effect on the glass surface.

Custom Acid-etched Glass and Mirror Advantages

• Consistent finish and appearance
• Maintenance free
• More mar-resistant than sandblasted glass
• Does not peel or discolor like films
• Does not scratch off like coatings

Custom Acid-etched Glass and Mirror Specifications

• Substrates : Glass and mirror
• Colors: Clear, bronze, grey, black, green, blue or ultra-clear *
• Glass thicknesses: 3 mm to 19 mm **
• Mirror thicknesses: 3 mm to 6 mm **
• Sizes available: Standard 96″ x 130″, on request 84” x 130” **
• Finishes:

Series 100 Velour on Satin
Series 200 Velour on Clear
Series 300 Satin on Clear

• Minimum Quantity: 4, 000 pounds

* Tempering of ultra-clear glass is recommended to correct slight color variances caused by the Walker Textures Nuance manufacturing process.

** Subject to glass availability.

Bear Glass can help you choose your patterned acid etched glass product needs to best fit for your project and by the way, we ship patterned acid etched glass worldwide.

For more information or to order your patterned acid etched glass products, please contact  Bear Glass at:

Factory / Office

Address:

Bear Glass Inc.

399 20^th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post Patterned Acid-Etched Glass and Mirrors By Bear Glass in Brooklyn NY appeared first on Bear Glass Blog.

Glass as a flooring option introduces new architectural opportunities allowing designers to play with color & light; defining space.

Bear Glass’s Anti-Slip Glass Floors & Treads are fully tested and engineered walking surfaces designed to instill confidence. Even in the most demanding traffic conditions Bear Glass flooring will exceed expectations; wet or dry.

Bear Glass is the premier distributor for Walker Glass. This alliance allows us to offer Walker`s entire line of products because since we buy in bulk from them we are able to save our clients time and money. In regards to traction glass, we carry Walker Textures Traction Glass.

Walker Textures Traction – the ultimate anti-slip glass flooring product. Multi-level acid-etching of the Traction surface provides an unprecedented design option by combining discretion and security without impeding the natural flow of light.

Traction is an all-glass flooring solution, using no coatings, paints or appliqués susceptible to chipping or flaking off. The slip resistant properties of Traction glass are entirely derived through acid etching, whereby portions of the glass surface are removed to varying depths by a controlled process. The result is attractive and durable anti-slip surfaces, characterised by striking designs. The unique combination of opacity and translucency provides for full privacy, while still allowing for maximum circulation of light between floors.

Walker Textures Traction offers many advantages, including:

• Superior slip resistance
• Obscures view while maintaining a high level of light transmittance
• Unique design
• Consistent acid-etched finish
• Conducive to high quality edgework
• More durable than applied coatings
• Superior resistance to surface contamination from dirt, oils, chemicals, liquids, food, etc.
• Free of iridescence

Glass Pattern 406 Technical Data on Acid-etched Anti-slip glass Traction glass provides a high slip resistant coefficient based on two recognized test methods. The following data has been tested and reported by the Tile Council of North America, an independent product testing facility: ANSI/NFSI B101.1: ”Test Method for Measuring wet SCOF of common Hard-Surface Floor Materials” Static Coefficient of Friction (SCOF) – Wet Conditions Pattern 406: 0.68 Pattern 407: 0.75 ASTM C1028: “Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method” Static Coefficient of Friction Pattern 406 Dry: 0.76  Wet: 0.60 Pattern 407 Dry: 0.74  Wet: 0.60 Product Specifications for Acid-etched Anti-slip glass Etching: Two finishes on one surface (Opaque & Satin) Colors: Clear and ultra-clear Thicknesses: 6 mm to 12 mm Dimensions: 96’’ x 130’’or 84’’ x 130’’ Walker Textures Traction surface provides an unprecedented design option on glass by combining discretion and security without impeding the natural flow of light. The slip resistant properties of Traction glass are entirely derived through acid etching, whereby portions of the glass surface are removed to varying depths by a controlled process. Traction glass provides a high slip resistant coefficient based on two recognized test methods namely: ANSI/NFSI B101.1 and ASTM C1028. The tests were conducted by an independent testing facility, the Tile Council of North America. “Glass flooring is one of the fastest growing application segments in the industry. The durability of our acid-etched surface is unmatched by other processes. We are very excited to launch our first patterns in a line-up that will surely expand…” says Ross Christie, V-P Sales & Marketing The Traction line will be offered in clear and low iron glass in thicknesses from 6 mm to 12 mm in standard size of 96’’ x 130’’. The patterns of this 400 series are made using two acid-etched finishes, Opaque and Satin. To order the Walker Textures Traction We ship our Bear Glass Traction Glass world wide. For more information, please contact us at: FACTORY/OFFICE Address: Bear Glass Inc. 399 20th Street Brooklyn, NY 11215 Phone: 718-832-3604 Fax: 718-832-0786 Email: bearglass@yahoo.com

The post Bear Glass Carries Anti Slip Glass and Non Slip Glass appeared first on Bear Glass Blog.

Bear Glass provides the service of sandblasting glass.  Sandblasting glass is becoming one of the very popular methods of etching glass.  Sandblasting glass can result in producing the most elegant etching on glass.  There are various techniques used in sandblasting glass that can create works of art as a finished product.

Sandblasting glass is a special glass treatment with the smallest abrasive particles that are forwarded together with an air stream at a special chamber.

A creative and decorative way of decorating glass is by enhancing it by the sandblasting glass method.  Basically, a matt image is being etched into a glass or mirror surface.

Sandblasting glass is also known as sandcarving. This method allows a greater control method to produce the highest quality work.  The process of sandblasting glass uses the same steps of producing any etching stencil but the material usually needs to be thicker to withstand the pressure of abrasive blasting as sandblasting glass does.  The sandblasting glass method takes place by blasting abrasive from the sandblaster over the stencil resist material.  This is all powered by the supplied air from the air compressor.  The glass becomes eroded to create a frosted elegant design.

Glass etching via sandblasting glass is a beautiful and elegant method of creating a graphic design on the surface of an otherwise smooth piece of glass. Etched and carved glass has been widely used throughout history, being found in upscale banks, hotels, residences, restaurants and theaters. The resulting etched surface can then be embellished even further with color to produce an even more impressive end result.

Sandblasting glass is the perfect addition to glass doors.  The etchings make wonderful details to front doors or kitchen cabinets.  Bear Glass can help you design your sandblasting glass needs to best fit your project or overall design goal.  Sandblasting glass can provide you with design alternatives that you did not think were possible.

We ship Sandblasted Glass world wide.

For more information, please contact us at:

FACTORY/OFFICE

Address:

Bear Glass Inc.

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

Email: bearglass@yahoo.com

The post Glass Etching By Sandblasting Glass appeared first on Bear Glass Blog.

Bear Glass has the answers you are looking for regarding wire glass.  Wire glass is used in fire-rated windows and doors because it meets most fire codes. It is made by feeding a welded wire net into the molten glass before it enters the rollers. The wire does not add strength to the glass, but it does hold the glass in the sash if it shatters.

The process of wire glass, or wired glass, is sheet glass in which wire mesh has been inserted during production. The impact resistance of this glass is similar to that of normal glass, but in case of breakage, the mesh retains the pieces of glass. This product used to be accepted as low-cost fire glass but is no longer acceptable for this use. Now, wire glass is mostly used for windows because of it exceptional security qualities. Clear wire glass and obscure wire glass is available at Bear Glass.

Wire glass is a common sight in schools, businesses, and hotels across the nation. Wire glass is manufactured primarily as a fire retardant, with wire mesh inlaid in the glass to prevent it from shattering and breaking out under stress or when exposed to high temperatures. With the window intact, the wire glass keeps the fire at bay, protecting those on the other side from the harmful effects of smoke and flame.

Wire glass typically comes in two types — Misco and boxed. Misco is also called diamond wire glass. In boxed wire glass, the wire is rotated 45-degrees, so that it makes s a checkerboard pattern, rather than diamonds.

There are pros and cons of installing wire glass.

There are many myths about wire glass and its proper usage. Primarily, most people assume that that the incorporation of wire into the glass makes it stronger, and that this makes it a good option for security glass. Actually, the wire in the glass actually weakens the wire glass from a strength standpoint, and makes it more susceptible to breaking. What the wire does do for the glass is hold it in place. That makes it safer from the standpoint that a broken window won’t send glass fragments showering through a room (hence its use in schools), and that the wire will hold the glass in place under extreme temperatures (hence its status as fire rated glass).

Wire glass is a smart addition in any area where a solid fire barrier and safety glass are beneficial. This includes using wire glass in public areas such as schools, public buildings, and businesses, and particularly in areas of these buildings that provide escape routes in case of fire. Windows in stairwells and in hallways that lead to emergency exits are prime examples of areas where fire rated wire glass is a smart addition.

We ship wire glass world wide.

For more information, please contact us at:

FACTORY/OFFICE

Address:

Bear Glass Inc.

399 20th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

Email: bearglass@yahoo.com

The post BEAR GLASS WIRE GLASS appeared first on Bear Glass Blog.