“Winter lies too long in country towns; hangs on until it is stale and shabby, old and sullen.”

Yes, winter is near and you need to take out your jacket and make sure that your room heater working properly. Winter in the United States lasts long and we love and hate this season.

This is the season to take rest, have a lot of drinks, partying, fun, and  Christmas. But, with all these fun activities, we must not forget how intense the temperature becomes and the drop at night making us all uncomfortable.

So, this winter, get your windows replaced with Insulated glass window. This glass is also capable of protecting you from thermal and chemical temperatures.

This glass is actually a tempered glass that has high-resistant power. If you are a builder/constructor then consider installing the glass. The windows made up of insulated glass can easily resist cold.

Insulated glass is genuinely double-paned glass and is mandatory by architecture codes in many ranges as an obligatory energy maintenance quota. Single pane glass cannot be called insulated as it cannot resist extreme temperature.

Installing the glass helps you reduce your heating and air conditioning bills because the panels help to improve the thermal performance.

The glass also reduces sunlight rays aka Ultra Violet rays effectively. The glass always looks fine as it reduces the influence of UV rays. The glass also provides protection against fogging.

At, Bear Glass, we have experienced professionals who will replace your old, broken windows with a double-pane glass window precisely.

Our service areas include New York, New Jersey, and throughout the United States. Let us know what kind of support you need, and we will be there to provide you the right sort of insulated glass product to make sure that your purpose is properly served.

Visit our website: http://bearglass.com

The post Insulated Glass to Protect Your Family From Cold appeared first on Bear Glass Blog.

Benefits Of Insulated Glass

There is much prosperity of using insulated window and door products in your home or office. They not only reduce one’s energy costs but also effective in lowering undesirable sound transmission.

In the summer, heat is spread through the glass and is engrossed by the walls, furniture, floors, etc. By utilizing window and entryway products with a low solar warmth pick up coefficient, the sun based radiation coming into one’s house is diminished. By using window and door products with a low solar heat gain coefficient, the solar radiation coming into one’s home is decreased. This lower the volume of heat entering the interior, thereby improving one’s interiors’ comfort level and reducing the amount of energy needed for cooling during summer season months. Moreover, during the winter seasons, insulated units create warmer interior glass surfaces, decreasing frost and condensation from forming.

The other prosperity is that during daytime hours, sunlight is disseminated through the glass and is absorbed by the glass walls, IG furniture, and flooring. Window glass selection influences the type and intensity of UV rays, which causes fading and degradation.

Key Performance Requirements

• Thermal Insulation: The primary logic for using Insulated Glass is to cut down on the thermal heat coming from outside.
• Working Principle: Dry air is a poor conductor of heat. Due to the air-gap, the conducted heat through glass is reduced significantly as it reaches the second pane.

• Structural Strength: Insulated Glass Units are usually excessively weighty. For example, IGUs often act as structural members of the building.
  It is paramount that the strength of IGUs is maintained.

Why Bear Glass?

Bear Glass is a one stop all types glass and mirror solution in NYC, Brooklyn, Canada and also all over the USA. We are a full-service glass fabricator, glass distributor and glass importer serving Industrial, Architectural customers worldwide. Our specialty is to fabricate the best quality Insulated Glass. We offer you the best price for the insulated glass. We can replace insulated glass windows, doors or any unit. In this Christmas buy an IGUs and make feel the warmth of interior beauty.

The post Warm Your Interior With Insulated Glass Unit appeared first on Bear Glass Blog.

Six ways of use glass in residential purpose. They are as follows :

1. Glass Window and glass door :

Bear Glass has the largest stock on window glass. You can use these types of glasses for your windows and doors. Bear Glass also installs glasses for window  as well as door too.

Twoway mirror glass on your windows and doors :

twoway mirror is a sheet of glass that can be seen through from one side and is a mirror on the other, used especially for observation of criminal suspects by law-enforcement officials or witnesses.

Insulated glass for window and doors : 

Insulated Glass is the combination of two or more panes of glass sealed with air, or inert gas between the panes.

Bullet proof glass in window and door purpose :

Bullet proof glasses are two layers of glasses with a layer of translucent plastic between them.
The plastic layer is made of polycarbonate which is tough and trasparent. The procedure of layering a polycarbonate substance within two layers of glass is called lamination.

Etched glass for door panel :

Bear Glass provides you the service of any type etched glass. Etched glass is becoming one of the very popular methods of etching glass. Etched glass can result in producing the most elegant etching on glass. There are various techniques used in etched glass that can create works of art as a finished product.

Art glass for window : 

Bear glass can give you a beautiful resin based stained glass. This type of art glass uses mainly for door panels, windows, fanlights, mirrors etc. with stained resin art glass you can have red, white, taupe, gun metal, just about want.

2. Glass Wall :

You can use glass wall for your interior decoration as in room dividers.

Types of glass you can use for :

Annealed Glass : Annealing is a process of cooling glass. Annealing glass is critical to its durability.

Tinted Glass : The glass used for windows in buildings, homes, and cars, while offering the advantage of letting light in, often compromises the privacy that the occupants desire, and can also let in more than the desired amount of heat.

Starphire Glass :  Starphire glass is a low iron glass that has much better visual clarity than standard glass.

Acid etched Glass : Acid etching is a process to etched a glass. By it you can keep your privacy safe.

Reflective Glass : Reflective glass is a glass that has been treated with a metallic coating to allow it to reflect heat. It works like a mirror.

Antiqued Mirror : Antiqued mirror is also used for glass wall. it is so elegant and luxuries.

Sandblasted Glass : By a sand blaster a glass is etched. This category includes many attractive designs.

Back-painted Glass : Back painted glass or backsplash glass gives a dramatic look for your home or office interiors. It is one side painted glass.

Printed Glass : You can also use painted glass for decorating your home.

Glue chip Glass : Glue chip is an art glass. If you want a stylish look glass wall you can apply it.

3. Glass floor and roof :

Bear Glass provides you glass floors and for your domestic up-to industrial buildings. There are many company and brands on it. But our products give an exclusive variety of designs on glass floors and roof. If you want that your residential or office floors look like classic and dignified from others you should try our glass floors.

Glass floors uses for :

You can use glass on floor for multi purpose. Now glass floors used not only on industrial buildings but also for residential purpose too. You can use Bear Glass anti sleep glass floor for your glass floor.

Some of the uses are as follows :

i) Kitchen floor
ii) Bathroom floor
iii) Office floors and roof
iv) Living room floor
v) Floors and roofs in shopping space etc.

 4. Kitchen baclsplashes :

You can use backsplash as well as antique mirror tiles for your kitchen. It will give you really a dramatic look. Bear Glass provides various colors on back-painted glass. Bear Glass offers you to choose your favorite color on backsplash glass. You can change your old fationed kitchen by using our backsplash designs.

5. Glass shower enclosure :

If you want a sensational shower shower space, then you should try glass shower enclosure. Frameless Shower doors as well as framed shower doors will give you a sparkling finish for shower space. You can use frameless sliding shower doors or shower screen on your bath tub area to give it a stylish touch.

Bear Glass provides a stock of shower doors designs for you. We will assist you to choose the best design for you which will surly matched your personality.

There are diverse prosperity the installing of Frameless and framed Shower Doors.

6. Glass or Mirror furniture :

Bear Glass has an endless possibilities for furniture to be mirrored.  these will give you an enchanting look for your interior. Here we list out some of the demanding furniture types.

a) Mirrored Dressing Tables
b) Mirrored Bedside Tables
c) Mirrored Chest
d) Mirrored wardrobes
e)Mirrored Cabinets
f) Mirrored Corner Table

Take home any of these products from Bear Glass and allow it to dazzle.

Why choose Bear Glass?

We are always ready to accept your unique demands. our order service team is excellent. Contact us for your request for a quote. Always remember Bear Glass is the full glass fabricator in your country.

The post Use Of Glass In Modern Architecture Part-5 appeared first on Bear Glass Blog.

Bear Glass Is A Premier Walker Distributor. We are better able to serve our customers with 2 facilities located in both Brooklyn NY and Tinton Falls NJ. Our Motto is ” We Do Everything In Glass And Mirror” so we are able to service any and all your glass and mirror needs.

Bear Glass NJ Acid Etched Glass is becoming trendy in design and construction.  The consistency and durability of the finish can reduce glare and reflection, add privacy, increase light transmission, and provide texture.  It is important to select the right acid-etched glass for an application, and avoid making issues during storage and fabrication.  Although the glass-etching process is generally consistent, variations in chemistry and other parameters create different surfaces with distinct visual and performance characteristics.  Glass is etched with an aqueous solution of hydrofluoric acid, which attacks the silica and roughens the glass surface.  Generally, the more ‘white’ or opaque the finish, the more rough and porous the surface is.  When choosing distinctive and unique types of glass, architects and designers often have specific objectives in mind.  With acid-etched glass, these goals can relate to light diffusion, light transmission, privacy, visual appearance, integration with surrounding objects, and energy efficiency through increased day lighting.  An etched surface with rugged peaks and deep valleys absorbs and diffuses light, rather than transmitting or reflecting it- the result is a rich, white, opaque appearance.  In contrast, an etched surface with smooth, rounded bumps enhances light transmission and creates a more transparent glass, characterized by reduced reflective glare and a soft translucent appearance.

Acid-etched Surface Finish

Acid-etched finished vary by manufacturer.  The type selected for a glass substrate renders a different level of opacity and smoothness and creates varied visual effects.  It also impacts performance ratios such as gloss, visible light transmission (VLT), visible light reflectance, shading coefficient, solar direct transmission, solar direct reflectance, and U-value.  The visual effect of the acid-etch finish on mirror varies depending on the extent of etching performed.  A lighter-etched mirror has more reflection whereas a deeper etch creates a matte finish and more depth in the glass.

Glass Substrate

The substrate also influences the color appearance, level of opacity, and performance ratios of acid-etched glass.  Many falsely believe pieces of ultra-clear glass look the same, irrespective of their origin; similarly, glass with a blue tint from manufacturer ABC is often incorrectly perceived to match the one produced by manufacturer XYZ.  Generally, the glass business markets different shades of glass in ultra-clear, green, blue, or black.  In addition, some glass floaters can make varying shades of one color.  For example, acid-etched products manufactured from low-iron glass have a translucent satin appearance without the ‘greening effect’ of ordinary clear glass.  Similarly, a piece of acid-etched glass made with a dark blue hue from one supplier creates a different visual effect than one made with light blue from the same manufacturer.  Consequently, the shade of the acid-etched glass or mirror likely varies among manufacturers, depending on the substrate used.  It is important to remember the acid-etched finish itself creates a different color appearance, with different tints having varying performance ratios.

Etching on both sides

Etching glass on both sides can enhance its characteristics.  This approach is suitable for applications requiring a higher level of opacity or a similar finish and visual effect on both sides of the glass panel (e.g. partitions).  Most glass is produced by the float process.  The raw materials- mainly silica sand, soda ash, and limestone- are melted in a furnace and then flowed onto a bath of molten tin.  The glass then takes form and gradually cools as it moves from the tin bath to a controlled cooling chamber.  Float glass is best etched on the ‘air’ or ‘atmosphere’ side of the sheet, due to the greater likelihood of impurities and surface imperfections on the ‘tin’ side.  Production of acid-etched mirrors and two-sided etched glass requires etching of the tin side, posing an increased risk of defects in the surface if inappropriately done.   When considering double-sided acid-etched glass or acid-etched mirror, the type of finish specified impacts quality.  The manufacturer of the acid-etched product can recommend the finish (if any) suitable for the application.

Exterior applications

Bear Glass New Jersey Acid Etched Glass may be appropriate for exterior applications, such as insulated glazing (IG) units, skylights, and balustrades.  As acid-etching is not a coating, its resistance properties in outside conditions are essentially equivalent to non-etched glass.  However, it is important to note an etched surface with rugged peaks and deep valleys could lead to higher maintenance costs because dirt particles may be harder to remove.  Therefore, the use on an etched surface with a lighter finish (i.e. smooth, rounded bumps) is recommended in exterior applications.  In these situations, the level and type of maintenance required is similar to that of non-etched glass.

Storage and Fabrication

If proper care is taken during storage and fabrication, acid-etched glass or mirror can be kept clean as easily as non-etched products.  Whether the glass is tempered, laminated, insulated, painted, or even bent, fabricators can preserve the quality of the final product.  However, the general suggestions for keeping acid-etched glass or mirror stain-free during storage and fabrication may not be suitable in all situations.  Fabricators should follow guidelines issued by the manufacturer of a particular product to prevent or fix any marks or stains that occur.

Storage

Proper storage practices can help avoid marking on acid-etched glass and mirror.  Storage spaces must be dry and adequately ventilated.  Sheets should not be stored in areas of high humidity or heat (e.g. places near steam or water pipes).  Spaces exposed to chemical fumes should also be avoided.  All these conditions promote staining.  Conversely, sheets should not be stored outdoors or in unheated areas.

Fabrication

Due to the particular characteristics of more rugged glass surfaces, extra care should be taken during their fabrication to minimize the likelihood of embedding grease or dirt into the surface.  Gloves must always be used when working with sheets.  When handling sheets using equipment with suction cups, the clean and dust-free cups should be applied to the flat, untreated side.  If this is impossible, care should be taken to ensure proper vacuum is achieved (i.e. testing must be done to be certain the cups ‘stick’ to the glass to handle to weight).  When edging glass, these practices should be followed:

1. The edging machine conveyors should be clean and free of grease and buildup of glass grindings or cerium oxide.
2. The conveyor must be regularly opened and the machine interior washed (particularly the brushes) using soapy water.
3. The front and back conveyor pads should be routinely brushed, until all traces of cerium oxide and glass grindings are removed.
4. The front and back conveyors must be synchronized at identical speeds.
5. Only coolants specifically recommended for glass grinding and that adhere closely to the manufacturer’s recommended dilution ration should be used.
6. Manufacturer guidelines for concentration levels must be followed when using cerium oxide, with care taken to never add more than the minimal amount necessary for good polishing.
7. Glass should be washed immediately after polishing.  Washer brushers with .36-mm (0.014-in) diameter nylon bristles offer the best results.  The glass washer should be equipped with one pair of upper and lower brushes for every 0.6m (2ft) per minute of travel- for example, a machine operating as a speed of 1.8m (6ft) per minute should have three pairs of brushes.  (This guideline is only applicable to regular float glass and not to coated products such as low-emissivity [low-e] glass).
8. As an extra precaution, wetting the glass surface immediately before polishing greatly reduces the risk of marking.

Writing the Right Specifications

Architects and designers constantly look to Bear Glass for new ways to use glass in exterior and interior applications.  Writing proper specifications, especially when distinctive and unique types of glass are chosen, is critical to ensure the desired design is achieved.  Acid-etched glass is no exception.  If care is not taken, the glass ordered and installed on the jobsite may be nothing like the product selected based on samples submitted.  To ensure the acid-etched glass products selected are actually used by the general contractor, glass fabricator, and glazier, the following information should be included in the specifications: name of manufacturer, product brand name, glass thickness, substrate (glass or mirror), tint (e.g. clear, ultra-clear, blue, green, black, bronze, grey), type of finish (name), and whether to etch on one or two glass faces.  Warranties and standards are often overlooked when writing specifications.  Inherent in the float glass process are small gaseous inclusions and minor abrasions.  Consequently, occasional, small ‘bubbles’ and hairlines are normal and acceptable under recognized standards; from a normal viewing distance, they are barely noticeable.  To ensure acid-etched products are made from float glass that conforms to industry standards, the manufacturer should be consulted.  In Canada, glass should comply with Canadian General Standards Board (CAN/CSBG) 12.3-M91, Flat, Clear Float Glass (Quality: Glazing).  In the United States, ASTM International C 1036-01, Standard Specification for Flat Glass (Quality: Q3-Stock Sheet) should be followed.  The manufacturer’s product warranty should refer to these standards.  Clearly, it is important to be specific about the nature of the acid-etched glass product required.  Communicating specifications in detail to a glass professional can help ensure the chosen product meets desired goals and objectives.

The post Bear Glass New Jersey Acid Etched Glass appeared first on Bear Glass Blog.

Bear Glass Obscure Glass is a charming adornment for any home or business !  Bear Glass Obscure Glass has designs imprinted in glass for privacy, light diffusion, and embellishment.  With over 50 years of customer satisfaction, here at Bear Glass, we  continue to delight our customers with our expertise, variety, and pleasant experiences !

Why does Bear Glass guarantee the most customer overall satisfaction?

Bear Glass is customized for each and every customer.  Our obscure glass can be used for cabinets, windows, furtniture, shower doors and even frameless shower doors! For extra durability, our obscure glass could be laminated or tempered as well.  Laminated Glass is held together with a piece of plastic in between the two pieces of glasss.  Tempered Glass is heated in our ovens. Bear Glass will transform your idea into reality !

The post Bear Glass: Obscure Glass For Homes And Business appeared first on Bear Glass Blog.

Bevel-Rite was a custom fabricator of mirror and plate glass that was located at 501 Prospect St. Unit 110  Lakewood, NJ 08701. In September 1980, they were the first beveling company in the the state of New Jersey and had grown to be a leading source to the glass and mirror industry.

Unfortunately because Bevelrite closed they’re doors this past year and their customers were left with few alternatives. The owner Jason Glago wanted to help his long standing customers with their glass and mirror business so he came to the best. He formed a relationship with upper management at Bear Glass and Bevelrite is now associated with Bear Glass.

Bevelrite used to fabricate high polished edges, beveled edges, miters, holes, and special cut outs, as well as ogee edges for special  shapes and circles and was a distributor of many different types of stock sizes of glass and mirror.

At Bear Glass we can do all of this plus a whole lot more. Bear Glass is a full Glass Fabricator in Brooklyn, NY. We are third generation glaziers. We are at our current location for over 30 years. Here we utilize over 25, 000 Sq. ft. to its maximum. We deliver to the tri-state area 5 days a week, with 5 trucks on the road daily. Also, we ship nationwide.

Bear Glass Inc. has been providing the country with the best quality, service and craftsmanship in the industry. We pride ourselves on our organization & the reputation we have built with our clientele. We strive to provide the best communication and reliability available while maintaining quality and craftsmanship. Here at Bear Glass we are very particular about who’s products we choose to offer. We are always concerned about the best interest of our customers & their ultimate satisfaction and we are offering our top representative to all former Bevelrite customers. Here is his contact info:

Position: Senior Account Representative

Address : 399 20^th Street Brooklyn, New York 11215

Phone: 732-901-2626

Fax For Quotes: 732-901-2266 Attention Tom

E-mail For Quotes: Bevelrite@gmail.com

Here is what Tom can do for you: · Provide fast and reliable service  · Provide competitive quotes for your projects via fax or email for your convenience. · Increase market share, by having the ability to do customized work that could not be done locally. · Maximize your ROI by not subbing out any of our work·

The post Bevelrite Customers Are Now Being Serviced By Bear Glass appeared first on Bear Glass Blog.

For four generations, Bear Glass has been supplying the world’s finest specialty glass to architects, contractors, designers and home owners. Our stock of over 2, 000 varieties of specialty glass features architectural glass, cast glass, tempered glass, etched glass, antique glass, art glass / colored glass, restoration glass, back painted glass, patterned glass and more get used in unlimited applications. The incredible inventory together with decades of experience and service are the foundation of Bear Glass.

The unique finishing capability of Bear Glass keeps it ahead of all competition. We paint glass using our standard colors or can match the color you desire. Our paints are extremely durable and are architectural grade for indoor and outdoor use.

Bear Glass is also the largest distributor of Walker’s pattern acid etched specialty glass in nation. Pattern acid etched glass and mirror not only create a great visual effect but also textural effect, due to the depth variation of the design. We have available Pattern Acid Etch Glass in stock like: Pattern 101, Pattern 102, Pattern 103, Pattern 104 and 105. In Satin, Velour and Opaque finishes. We also have Patterns 301, 302, 303, 305 and 305.

Bear Glass also specializes in glue chip specialty glass. This attractive  Specialty Glass is created by applying hot glue to the sandblasted surface of annealed glass and as it dries, the glue shrinks and cools removing flakes of glass from the surface. This  specialty glass allows every design to be different, giving uniqueness to every piece of glass or mirror. Glue Chip s pecialty glass by Bear Glass is very popular for backgrounds in windows and cabinets and is especially beautiful combined with bevels and bevel clusters.

Bear Glass is one of the largest suppliers of specialty glass. While we are specialty fabricator, we do much more than create and etch designs on our customer’s glass. We supply glass for restaurant chains, commercial buildings and multiple facility construction projects all over. We supply superior specialty glass, custom mirrors and make specialty cuts, doing all the edgework and beveling, whatever the project calls for so all your glass and sign needs are taken care of.

Bear Glass ships   specialty glass products worldwide. We do everything on glass.

For more information or to order your specialty glass product, please contact Bear Glass at:

Factory / Office

Address :

Bear Glass Inc.

399 20^th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post Specialty Glass By Bear Glass In Brooklyn NY appeared first on Bear Glass Blog.

Patterned glass is a not-perfectly-smooth structure with different patterns impressed on it. The depth, size and shape of the patterns largely determine the magnitude and direction of reflection. Patterned glass or Decorative glass by Bear Glass usually transmits only slightly less light than clear glass. It can be used for a variety of applications like interior design and decorations, furniture, windows, street furniture etc.

Patterned glass by Bear Glass is made with a rolled glass process. All rolled patterned glass begins as a batch of materials, including silica sand, soda, and lime. These materials are melted together in a tank, and then the molten glass mixture is fed onto a machine slab. The glass flows under a refractory gate which controls glass volume and speed then moves between two counter-rotating, water-cooled rollers. One of these rollers is embossed, imprinting a distinct pattern onto the soft surface of the glass while the other roller is smooth.

The result is a piece of glass that is patterned and textured on one side, while smooth on the reverse. The distance between the two rollers determines the ultimate thickness of the glass. After it moves between the rollers, patterned glass is annealed or cooled slowly in order to remove any residual stresses. Rolled patterned glass can then be cut by the expert artisans of Bear Glass into standard sizes or cut into customized sizes for a specific customer application.

Some popular patterns, known as camphor glass, combined the use of clear glass with an acid-finished design.

Basically patterned glass has a pattern impressed on one side of the glass which prevents someone from seeing though it, for privacy. Pattern glass can also be ordered in various tints as well. A common application of this sort is when used in privacy walls to separate one room from another. Patterned glass is not-perfectly-smooth structure with different patterns impressed on it.

Patterned glass by Bear Glass can be used in commercial, residential, office or specialty applications. They have various usage including shower doors and tub enclosures including frameless shower doors, interior partitions, translucent door and window treatments, foyers and vestibules, patio furniture, shelving, decorative furniture, and lighting fixtures. Pattern glass are available in large amount of patterns in Bear Glass stores.

Bear Glass ships their Patterned glass products worldwide. We do everything on glass.

For more information or to order your Patterned glass, please contact Bear Glass at:

Factory/ Office:

Address :

Bear Glass Inc.

399 20^th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post Patterned Glass By Bear Glass In Brooklyn NY appeared first on Bear Glass Blog.

Bear Glass Is The Premier Walker Glass Distributor

Bear Glass stocks all Walker’s Products in our 25000 SQFT facility located in Brooklyn New York and we would like to help our customers better understand the different patterned glass that we offer through Walker.

Walker Textures Nuance Stock Patterned Acid-Etched Glass and Mirror

Walker Textures Nuance Stock has been created to answer the growing demand for unique and environmentally friendly material for decorative and architectural applications. Patterned acid-etched glass and mirror will not only provide a great visual effect but a textural effect as well, due to the depth variation of the design.

The stock product line of acid-etched patterns is available in five distinctive designs with the 100 and 300 series. The 100 series is an acid-etched finish which combines Velour and Satin creating a true sense of privacy while maintaining a design element to the glass. The 300 series is our Satin finish on clear glass giving greater visibility to the decor through the glass. Both of these series feature a relief effect which adds character to the glass surface.

Patterned Acid-Etched Glass and Mirror Advantages

• Consistent finish and appearance
• Maintenance free
• More mar-resistant than sandblasted glass
• Does not peel or discolor like films
• Does not scratch off like coatings

Glass – Velour on Satin

Glass – Satin on Clear

Patterned Acid-etched Glass and Mirror Specifications

Substrates : Glass and mirror

• Colors: Clear, bronze, grey, black, green, blue or ultra-clear *
• Glass thicknesses: 3 mm to 19 mm **
• Mirror thicknesses: 3 mm to 6 mm **
• Sizes available: Standard 96″ x 130″, on request 84” x 130” **
• Finishes:

Series 100 Velour on Satin
Series 300 Satin on Clear

• Selected skus available in less than 4, 000 pound quantities

Walker Textures Nuance Custom Acid-etched Glass and Mirror

A world of countless creative patterns opens up to you with Walker Textures Nuance Custom. Now you can let your imagination run wild and create virtually any design. Thanks to our continuous research and development we are achieving high-quality registration and an unmatched level of detail.

The custom product line features three different acid-etch combinations allowing you to obtain your desired result. The 100 series combines two of our finishes Velour on Satin. The 200 series is our Velour on clear glass and the 300 series is our Satin on clear glass. All of these combinations create a nice textural effect on the glass surface.

Custom Acid-etched Glass and Mirror Advantages

• Consistent finish and appearance
• Maintenance free
• More mar-resistant than sandblasted glass
• Does not peel or discolor like films
• Does not scratch off like coatings

Custom Acid-etched Glass and Mirror Specifications

• Substrates : Glass and mirror
• Colors: Clear, bronze, grey, black, green, blue or ultra-clear *
• Glass thicknesses: 3 mm to 19 mm **
• Mirror thicknesses: 3 mm to 6 mm **
• Sizes available: Standard 96″ x 130″, on request 84” x 130” **
• Finishes:

Series 100 Velour on Satin
Series 200 Velour on Clear
Series 300 Satin on Clear

• Minimum Quantity: 4, 000 pounds

* Tempering of ultra-clear glass is recommended to correct slight color variances caused by the Walker Textures Nuance manufacturing process.

** Subject to glass availability.

Bear Glass can help you choose your patterned acid etched glass product needs to best fit for your project and by the way, we ship patterned acid etched glass worldwide.

For more information or to order your patterned acid etched glass products, please contact  Bear Glass at:

Factory / Office

Address:

Bear Glass Inc.

399 20^th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post Patterned Acid-Etched Glass and Mirrors By Bear Glass in Brooklyn NY appeared first on Bear Glass Blog.

The beauty of a glass work depends on how it is cut. It may be a mirror glass, or a simple or designer door or window glass, may be table tops or cabinet doors. But how the cutting of it decides how it is going to look in your commercial or residential  decor.

Bear Glass is a fourth generation glass company and already proved its expertise in all facets of glass and mirror applications . Bear Glass can provide you   custom cut glass designs.

With the help of modern glass cutting tools, Bear Glass can provide accurate  custom cut glass, but glass cutting depends mostly on one’s idea of aesthetics. Our   glass cutting machines can help someone to cut a glass, but the design and beauty of a glass work is entirely dependent upon one’s personal view and ideas.

Bear Glass has a solution for every application:
Glass cut by hand in time honored tradition is available for those who crave old world artistry or for smaller pieces that require a personal touch.
CNC Glass Cutting Machine is computer controlled for a high degree of accuracy: to + or – 1/64“.
Laminated Glass Cutting Machine for quick, easy, and accurate cutting in one step.
Water Jet Cutting is suited to a wide range of materials; benefits also include minimal material waste in order to keep your cost low, additionally complex shapes can be custom made to a high degree of accuracy, cuts are burr free, the process is non-toxic, and lack of heat-related distortion means superior edge quality.
So whether you need custom shapes, sizes, or holes drilled, if its glass cutting you require look no further than Bear Glass for all your glass applications.
Nowadays in the modern world time there is a wide range of Glass Cut to Size.  Bear Glass supplies clear, patterned, mirror, satin, tinted, laminated, fire resistant, acid etched and more.All in various thicknesses ranging from 1/16” to 1”.

Custom cut glass by Bear Glass has massive use throughout the nation. It may be a custom tempered glass, may be a custom laminated glass for your tabletop or cabinet-top; Bear Glass can always assure that you will have the best product.

Any custom cut glass design can make your household or showroom look more attractive. Bear Glass is the glass company that guaranties you to provide the best and the unique product. So, for having the best custom cut glass product, your first choice should be Bear Glass.

You can choose your   custom cut glass tabletop, custom cut mirror or other custom cut glass or mirror applications, from Bear Glass.

Not being only your for your home interior or showroom needs, Bear Glass c ustom cut glass products  can change the look of your office building also. Custom cut glass doors or window, or even custom cut designed glass partitions can give your office or work-place a much modern and furnished look.

Bear Glass ships our  custom cut glass products worldwide.

WE  STOCK  1″ THICK GLASS. WE CAN CUSTOM CUT ANY SIZE GLASS AND MIRROR. For more information or to order your Bear Glass custom cut glass products, please contact us at:

FACTORY/ OFFICE

Address:

Bear Glass Inc.

399 20^th Street

Brooklyn, NY 11215

Phone: 718-832-3604

Fax: 718-832-0786

E-mail: bearglass@yahoo.com

The post Custom Cut Glass By Bear Glass appeared first on Bear Glass Blog.